Westek TM77DHB Indoor Daily Timer

Instruction Manual & Warranty

Setting On/Off Periods

The timer can be set to up to 48 On/Off commands per day. Use your finger, a pen, or a screwdriver to pull up all pins corresponding to the desired "Off" time. For the desired "On" time, ensure the pins are pushed down. Each pin represents 30 minutes; 2 pins equal 1 hour.

Setting Time

Turn the dial clockwise until the triangular pointer is aligned with the actual time. Ensure the switch on the top of the unit is set to TIMER ON.

Connection

Once the desired On/Off times and the actual time are set, plug the timer into a wall outlet and then plug the appliance(s) into the timer. Make sure the wall outlet and the appliance are turned on. The timer will begin operating, turning the appliance On/Off according to the pre-set commands.

Manual On/Off

Pre-set On/Off commands can be overridden by using the manual override switch located on the top of the unit. When switched to OUTLET ON, the connected appliance will be switched on permanently. To reactivate the timer's control of the appliance, turn the appliance switch on and set the timer's override switch to TIMER ON. In case of a power failure, reset the timer as explained above.

Specifications

Voltage: 125V~
Frequency: 60Hz
Resistive Load: 15A, 1875W
Tungsten Load: 10A, 1250W
Minimum Temperature: 0°C (32°F)
Maximum Temperature: 55°C (131°F)

Precautions

For indoor use only.
Do not use with any appliance that exceeds the timer's capacity.
Always ensure that the appliance plug is fully inserted into the timer.
If the timer needs cleaning, unplug it and wipe it with a dry cloth.
Do not immerse the timer in water or any liquid.
FAN HEATERS AND HEATERS WITH EXPOSED ELEMENTS SHOULD NOT BE CONNECTED TO TIMERS.

Limited One Year Warranty

AmerTac™ warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase. AmerTac's obligations are limited to repairing or replacing any defective unit. This warranty is effective only if such units are returned within one year of the purchase date to AmerTac, 250 Boulder Drive, Breinigsville, PA 18031. The warranty is void if damage is due to misuse or improper installation. AmerTac will not be liable for consequential or incidental damages relating in any way to this product.

Questions?

Contact AmerTac at 201.661.9944

250 Boulder Drive
Breinigsville, PA 18031
www.amertac.com

Made in China

Fabriqué en Chine/Hecho en China

	Westek TE02DHB/TE22DHB Indoor 1-Outlet Digital Timer: Instruction Manual & Warranty Comprehensive guide for the Westek TE02DHB/TE22DHB 1-Outlet Digital Timer, covering features, programming, safety precautions, and a one-year limited warranty.
	Westek TM1677DHB 1-Outlet Mechanical Timer: Instruction Manual & Warranty This document provides instructions for setting up and using the Westek TM1677DHB 1-Outlet Mechanical Timer. It covers programming, setting the time, manual override, ratings, and warranty information.
	Westek WiFi Enabled Multi-Color Puck Lights: Installation and Operation Guide Comprehensive guide for Westek WiFi enabled multi-color puck lights (PIP-RGB-WIFI, PIP-RGB-A). Covers installation, wave sensor control, app features, Wi-Fi setup, operation, specifications, warnings, and warranty information.
	Westek RFK100 Wireless RF Remote Control System - User Manual & Instructions Detailed user manual for the Westek RFK100 Wireless RF Remote Control System, including RFA-108 wall switch and RFA-110 plug-in receiver. Covers installation, operation, troubleshooting, specifications, and warranty.
	Westek USLM-PIP-RF Plug-In Puck Lights with RF Remote - Installation and Operation Guide Comprehensive guide for Westek USLM-PIP-RF plug-in puck lights. Learn about installation, RF remote and wave sensor operation, dimming, color temperature adjustment, and troubleshooting.
	Westek TAPE10RCWF-T WiFi Enabled RGB/CCT LED Light Strip User Manual and Instructions Comprehensive guide for the Westek TAPE10RCWF-T WiFi Enabled RGB/CCT LED Light Strip, covering installation, safety, WiFi pairing, app control, and specifications. Learn how to control colors, brightness, and set schedules using the Westek app and voice assistants.
	Westek Wireless RF Remote Control System RFK100, RFK100L User Guide Instructions and troubleshooting guide for the Westek Wireless RF Remote Control System, including the Wall Mounted Switch RFA-108 and Plug-in Receiver RFA-110. Learn how to install, operate, and troubleshoot the system for convenient control of lamps and appliances.