Westek Indoor 1-Outlet Digital Timer

Before Using Your Timer

Please read instructions carefully.

Features

• 20 programmable ON/OFF settings per week
• 12 hour AM/PM & 24 hour display
• Programmable in 1 minute interval
• Random ON/OFF Feature (2-30 minutes of programmed time)
• Manual Override Button: select temporary for one program period, or permanent override.

Key Functions

• SET: Set time and confirm the program setting
• [+] / [-]: Increase or decrease digit in setting
• FUNCTION: Change output state to ON/OFF and set program
• RESET: Initialize or reset unit

Clock Time Setting

1. Press SET button for 3 seconds. Week digits will flash on display.
2. Using [+] or [-] buttons set the correct week. Week day will increase or decrease continuously if [+] or [-] buttons are depressed for more than 1 second.
3. Press SET button again to set Hour. Hour digits will flash on display.
4. Using [+] or [-] buttons to set correct hours. Hour will increase or decrease continuously if [+] or [-] buttons are depressed for more than 1 second.
5. Press SET button again to set Minutes. Minute digits will flash on display.
6. Using [+] or [-] buttons set the correct Minutes. Minute will increase or decrease continuously if [+] or [-] buttons are depressed for more than 1 second.
7. Press [-] button for 3 seconds to choose 12 hour AM/PM or 24 hour display.
8. Press [+] button for 3 seconds to set Daylight Saving Time, 'DST' will appear on display. Press again to cancel.

Programming of Switching Times (ON/OFF)

1. Press FUNCTION button 5 times until 'PROG 1 ON' appears on display and flashes.
2. Press the SET button, using [+] or [-] buttons to set the Day(s) of first program.
3. Press the SET button, using [+] or [-] buttons to set the hour of the first On program.
4. Press the SET button, using [+] or [-] buttons to set the minutes of the first ON program.
5. Press the SET button, "1 on" will flash. Press [+]. "1 off" will now flash.
6. Repeat steps 2-4 above to set the corresponding OFF time for Program 1.
7. Note: Pressing and holding [+] or [-] buttons will rapidly increase or decrease time settings.
8. Note: Pressing [+] or [-] buttons simultaneously cancels current setting.
9. Repeat steps 2-5 to set ON/OFF times for additional programs (up to 20 total programs per week).
10. After all programs have been set, press FUNCTION button to return to "current time" screen.
11. If programming is interrupted for more than 10 seconds while setting timer, it will automatically exit setting mode. Preset time will be preserved.
12. Note1: Programming of switching times (ON/OFF) will not work properly if 'PROG ON overlaps with 'PROG OFF'.

Random ON/OFF Security Feature

Press FUNCTION button until 'RND' digits flash on display, press SET button to enter Random Mode. 'RND' will appear on display. Programmed ON/OFF time will randomly fluctuate in a range of 2~30 minutes. Repeat the operation above to cancel 'RND' function.

Count Down ON/OFF Setting

1. Press FUNCTION button 6 times until 'CTD' and 'ON' digits flash on display.
2. Press SET button, 'ON' digits will flash on display, use [+] or [-] to set hours.
3. Press SET button, use [+] or [-] to set minutes.
4. Press SET button, use [+] or [-] to set seconds.
5. Press SET to initiate countdown sequence. Device will turn on, screen will indicate AUTO ON, and remaining time will be shown on screen. When countdown reaches 0:00:00, device will turn off.
6. Press FUNCTION button to check current time.
7. Note: Countdown function overrides all others. Exit Countdown mode before using other functions.

Manual Override Setting

Use Function button to toggle settings:

• On: Device is On, will not be subject to programmed settings.
• Off: Device is Off, will not be subject to programmed settings.
• Auto On: Device is currently On, will run settings as programmed.
• Auto Off: Device is currently Off, will run settings as programmed.

Reset Button

Press RESET button. Timer will resume in default status.

Important Safety Precautions

• Use indoors only.
• Keep device out of the reach of children.
• Do not plug this timer into another timer switch.
• Do not plug any device performing mechanical movement directly into timer.
• Do not insert needles or any other metal objects into mains outlet.
• Avoid moisture, extreme temperatures, shock and vibration.
• Do not open timer. Repairs must be performed by authorized service personnel only.
• To clean casing and display use a soft cloth. Do not use chemical or scouring agents. Do not submerge in water.

Ratings

• 120VAC, 60Hz
• 5A, Resistive or General Purpose
• 240W Tungsten
• Back-up Battery: Rechargeable

(Also listed in French: CLASSE 120 Vca 60 Hz, 5 A Résistif ou Utilisation I, 240 W Tungstène, Pile de secours: rechargea)

(Also listed in Spanish: CLASIFICACIONES 120 VAC, 60 Hz, 5 A, Resistivo o Uso General, 240 W Tungsteno, Batería de respaldo: Recargable)