Bestier 51.3" Computer Desk with LED
This document provides assembly instructions for the Bestier 51.3" Computer Desk with LED.
Helpful Hints
Before You Start
- Inspect the product packaging to ensure the appearance is good.
- Read the assembly instruction carefully and follow it step by step.
- To avoid any scratching, putting a soft blanket on the floor is suggested.
- Identify, sort, and count all the parts with tags.
- Find out the installation position according to the drawing and install it in correct steps.
Other
- People needed for assembly: 1-2.
- Estimated assembly time: 0.5-1 hour.
Caution: Be cautious when using a power drill or power screwdriver. Please be aware to slow down and stop when the screw is nearly tight.
Warning: Do not use any harsh chemicals or abrasive cleaners for this item. Push, pull, or drag this item carefully.
Part List
| Part Number | Description | Quantity |
|---|---|---|
| 1 | Desk Top | x1 |
| 2 | Side Frame | x2 |
| 3 | Top Shelf | x1 |
| 4 | Support Bar | x1 |
| 5 | Shelf | x1 |
| 6 | Long Support Bar | x2 |
| 7 | Short Support Bar | x1 |
| 8 | Back Support Bar | x1 |
| 9 | Cross Bar | x2 |
| 10 | Long Rod | x4 |
| 11 | Small Shelf | x1 |
| 12 | Bracket | x1 |
| 13 | Light Strip | x3 |
| 14 | Storage Bag | x1 |
| 15 | LED Controller | x1 |
| 16 | Hook | x1 |
Accessory List
| Label | Description | Quantity |
|---|---|---|
| A | ST7x50mm Screw | 8+1 |
| B | M6x30mm Screw | 35+2 |
| C | M6x12mm Screw | 1 |
| D | M6 Nut | 8+1 |
| E | M4 Screw | 1 |
Assembly Steps
Step 1-2: Attach side frames (2) to the desk top (1) using screws (A). Ensure to tighten screws to 70% initially.
Step 3: Assemble the shelving unit. Attach the top shelf (3) and shelves (5) to the side frames using screws (B). Connect the long support bars (6) and back support bar (8) using screws (B). Tighten screws to 70%.
Step 4: Attach the bracket (12) to the top shelf (3) using screws (B). You can choose any holes to adjust the height.
Step 5: Connect the cross bars (9) between the side frames (4) using screws (B). Attach the short support bar (7) using screws (B). Tighten screws to 70%.
Step 6: Attach the storage bag (14) to the side frame using screws (B) and nuts (D). Use screws (D) for the storage bag attachment.
Step 7: Connect the long rods (10) to the shelving unit using screws (B). Tighten screws to 70%.
Step 8: Secure the desk top (1) to the frame using screws (B). Tighten all screws to 100%.
Step 9: Assemble the LED lighting. Connect the light strip (13) to the LED controller (15) using the provided connectors. Attach the LED controller to the desk using screws (C) and nuts (D).
Step 10-12 (Style A): Connect the light strip (13) to the controller (15) and plug into a 5V USB power source. The arrow on the light strip should point to the controller's front side.
Step 13-15 (Style B): Continue assembly as shown in the diagrams, ensuring all parts are correctly aligned and secured.
Step 16: Final check of all connections and ensure the desk is stable.
Customer Support
For customer support, please contact Bestier:
| Region | Contact Information |
|---|---|
| North American | 888-666-1086, Service.US@bestier.net |
| Europe | Service.UK@bestier.net, Service.FR@bestier.net, Service.ES@bestier.net |
| Asia | Service.DE@bestier.net, 488-880-283, Service.IT@bestier.net, Service.JP@bestier.net |
| Global | Service@bestier.net, 0755-26917626, sskj@bestier.net |
Made in China.
