Bestier L-Shaped Desk with Shelves
Assembly Instructions
Customer Support
Contact Bestier for assistance:
Phone: 888-666-1086
Email: Service@bestier.net
Bestier thanks you for your purchase. If you require any help, please do not hesitate to contact us. Sharing your shopping experience on the platform is appreciated if you are satisfied.
Model: BEST-15158-D31
Version: v102
Helpful Hints
Before You Start
- Inspect product packaging to ensure the appearance is good.
- Read the assembly instructions carefully and follow each step.
- To prevent scratching, it is suggested to place a soft blanket on the floor.
- Identify, sort, and count all parts using the provided tags.
- Determine the installation position and proceed with assembly in the correct sequence.
Caution
- Exercise caution when using a power drill or power screwdriver.
- Slow down and stop when screws are nearly tight.
- Do not use harsh chemicals or abrasive cleaners on this item.
- Handle the item carefully; push, pull, or drag it with caution.
Other Information
- People needed for assembly: 1-2
- Estimated assembly time: 0.5-1 hour
- An assembly demonstration video is available on the product page on Amazon.
Product Dimensions
All dimensions are in inches.
Overall Depth (each side): 22.8"
Overall Width (each side): 59.4"
Desk Height: 29.1"
Shelf Depth: 11.8"
Shelf Width (main unit): 35"
Shelf Width (side unit): 23.6"
Height of lower shelves: 12.3"
Part List
| No. | Description | Quantity |
|---|---|---|
| 1 | Main Tabletop Panel (Left) | x1 |
| 2 | Main Tabletop Panel (Right) | x1 |
| 3 | Connecting Tabletop Panel | x1 |
| 4 | Side Shelf Unit Panel | x2 |
| 5 | Shelf Panel | x2 |
| 6 | Desk Leg Frame | x1 |
| 7 | Vertical Shelf Support | x2 |
| 8 | Horizontal Shelf Support | x2 |
| 9 | Long Connecting Bar | x1 |
| 10 | Short Connecting Bar | x1 |
| 11 | Medium Connecting Bar | x1 |
| 12 | Short Connecting Bar | x1 |
| 13 | Back Cross Brace | x2 |
| 14 | Small Mounting Plate | x2 |
| 15 | L-Shaped Mounting Bracket | x2 |
Accessory List
| No. | Description | Size | Quantity |
|---|---|---|---|
| A | Screw | M6x10 | 2 |
| B | Screw | M6x30 | 29 |
| C | Screw | M6x35 | 8 |
| D | Screw | M4x25 | 8 |
| E | Bolt | M6 | 8 |
| F | Wood Screw | ST3.5x14 | 14 |
| G | Nut | M6 | 1 |
| H | Nut | M4 | 8 |
| J | Washer | Ø8 | 5 |
| K | Large Washer/Disc | Ø60 | 3 |
Assembly Steps
This L-shaped desk can be assembled in multiple configurations (Installation Methods A, B, C). The following steps detail the general assembly process, referencing parts and accessories.
Step 1: Construct Shelf Unit Frames
Begin by assembling the two side shelf units. Take side panels (4) and attach vertical supports (7) and horizontal supports (8) to them using screws B (M6x30) and C (M6x35). Ensure the supports are oriented correctly as per the diagrams. Then, attach the back cross braces (13) to the rear of these frames using screws F (ST3.5x14) for added stability.
Step 2: Assemble Main Desk Structure
Attach the desk leg frames (6) to the underside of the main tabletop panels (1, 2, 3). Connect the assembled shelf units to the desk sections using the various connecting bars (9, 10, 11, 12). These bars link the tabletop surfaces and the shelf unit frames. Use screws A (M6x10), B (M6x30), C (M6x35), and F (ST3.5x14). L-shaped brackets (15) and nuts G (M6) are used to secure these connections.
Step 3: Attach Tabletop Panels
Carefully place the main tabletop panels (1, 2, 3) onto the assembled frame. Secure them firmly to the supporting structure using screws B (M6x30) and F (ST3.5x14). Ensure the panels are aligned correctly for the desired L-shape configuration.
Step 4: Install Shelves
Insert the shelf panels (5) into the pre-drilled holes or slots on the vertical supports (7) of the shelf units. Secure each shelf using bolts E (M6), large washers K (Ø60), and small washers J (Ø8). This step completes the shelf assembly.
Step 5: Final Checks and Tightening
Review all connections. Ensure all screws and bolts are fully tightened for maximum stability. Confirm the desk is level and all parts are correctly positioned according to your chosen installation method (A, B, or C).
Note: The specific configuration of the L-shape depends on how the two main desk sections and shelf units are oriented and connected. The diagrams provided in the original document illustrate these different configurations.
