Bestier D385R L Desk with Drawer Cabinet Assembly Instructions
Product Overview
This document provides comprehensive assembly instructions for the Bestier D385R L-shaped desk with a drawer cabinet. It details the parts, accessories, and step-by-step guidance for assembly.
Helpful Hints
Before You Start:
- Inspect product packaging to ensure the appearance is good.
- Read the assembly instructions carefully and follow them step by step.
- To avoid any scratching, placing a soft blanket on the floor is suggested.
- Identify, sort, and count all parts with tags.
- Find the installation position according to the drawing and install it in correct steps.
Other Information:
- People needed for assembly: 1-2.
- Estimated assembly time: 0.5-1 hour.
? Caution:
- Be cautious when using a power drill or power screwdriver.
- Slow down and stop when a screw is nearly tight.
- Do not use harsh chemicals or abrasive cleaners.
- Push, pull, or drag the item carefully.
Dimensions and Weight Capacities
The desk is available in different configurations (Styles A, B, C) with varying dimensions and weight capacities for its surfaces and shelves. Refer to the diagrams for specific measurements in inches/cm and weight limits in lbs/kg.
Example dimensions shown include 60"/152.4CM, 54.9"/139.4CM, 40.3"/102.4CM, 19.7"/50CM, 14.6"/37CM, 7.2"/18.2CM, 18.5"/47CM, 30"/76.2CM, and 95.2"/241.8CM. Weight capacities are indicated up to 100 LBS (45 KG), 20 LBS (9 KG), and 5 LBS (2.2 KG).
Part List
| Part ID | Description | Quantity |
|---|---|---|
| 1 | Desk Top Panel | X2 |
| 2 | Drawer Cabinet Top Panel | X1 |
| 3 | Cabinet Side Panel | X1 |
| 4 | Cabinet Bottom Panel | X1 |
| 5 | Cabinet Shelf | X1 |
| 6 | Cabinet Back Panel | X1 |
| 7 | Drawer Cabinet Side Panel | X1 |
| 8 | Drawer Cabinet Back Panel | X1 |
| 9 | Cabinet Door | X1 |
| 10 | Drawer Front Panel | X1 |
| 11 | Drawer Runner | X2 |
| 12 | Desk Leg/Frame | X2 |
| 13 | Desk Support Beam | X2 |
| 14 | Desk Support Beam | X2 |
| 15 | Desk Support Beam | X2 |
| 16 | Desk Support Beam | X4 |
| 17 | Hanging Hook | X2 |
| 18 | Connector Plate | X2 |
| 19 | Drawer Handle Support | X1 |
| 20 | Drawer Slide Mechanism (20A, 20B) | X1 |
Accessory List
| ID | Description | Quantity |
|---|---|---|
| A | ST6x35mm Screw | 14+1 |
| B | Ø15mm Cam Lock | 14+1 |
| C | ST7x50mm Screw | 8+1 |
| D | M6x25mm Screw | 2 |
| E | M6x30mm Screw | 31+2 |
| F | M6 Nut | 10+1 |
| G | ST3x14mm Screw | 8+1 |
| H | ST4x12mm Screw | 4+1 |
| I | M4x18mm Screw | 2 |
| J | Ø5x17mm Screw | 4+1 |
| K | Ø22mm Shelf Support | 4+1 |
| L | Connector | 4+1 |
| M | Ø8x30mm Screw | 14+1 |
| N | Drawer Slide Part | 1 |
| O | Hinge Part | 1 |
| P | Hinge Part | 1 |
| Q | Hinge Part | 2 |
| R | Ø8mm Shelf Support | 6+2 |
| S | ST3.5x12mm Screw | 4+1 |
| T | M4 Screw | 1 |
Assembly Steps
Follow these steps carefully to assemble your Bestier L Desk with Drawer Cabinet.
Accessory A/B: Cam Lock Mechanism (Steps 1-4)
⚙️ Step 1: Screw the cam dowel (Accessory A) into the pre-drilled holes on the edge of a panel.
⚙️ Step 2: Place another panel onto the cam dowels, aligning the holes.
⚙️ Step 3: Ensure the cam lock (Accessory B) is inserted into the larger hole on the second panel, paying attention to its orientation (arrow/slot should align with the dowel head).
⚙️ Step 4: Tighten the cam lock clockwise using a screwdriver until it stops, securing the two panels together. ✔️
Cabinet Assembly (Steps 5-10)
⚙️ Step 5: Attach the cabinet bottom panel (4) to the cabinet side panels (3, 7) using cam locks (B) and dowels (A).
⚙️ Step 6: Slide the cabinet back panel (6, 8) into the grooves on the side and bottom panels.
⚙️ Step 7: Attach the cabinet top panel (2) to the side panels using cam locks (B) and dowels (A).
⚙️ Step 8: Insert shelf supports (K) into the desired holes inside the cabinet.
⚙️ Step 9: Place the cabinet shelf (5) onto the shelf supports.
⚙️ Step 10: Attach the drawer runners (11) to the inside of the cabinet side panels using screws (G).
Drawer Assembly (Steps 11-14)
⚙️ Step 11: Attach drawer slide parts (N) to the drawer front panel (10) and drawer sides using screws (S, G).
⚙️ Step 12: Assemble the drawer box using the drawer front (10), sides, and back, securing with screws (S, G).
⚙️ Step 13: Attach the drawer handle (20A/20B) to the drawer front panel (10) using screws (G).
⚙️ Step 14: Insert the assembled drawer into the cabinet runners.
Cabinet Door Assembly (Steps 15-18)
⚙️ Step 15: Attach hinges (O, P, Q) to the cabinet door (9) using screws (G).
⚙️ Step 16: Attach the other part of the hinges to the cabinet side panel (3) using screws (G).
⚙️ Step 17: Mount the cabinet door (9) onto the cabinet by connecting the hinges.
⚙️ Step 18: Adjust the door alignment if necessary.
Desk Frame Assembly (Steps 19-24)
⚙️ Step 19: Connect the desk leg/frame parts (12) to the desk support beams (13, 14, 15, 16) using screws (E) and nuts (F).
⚙️ Step 20: Assemble the main desk frame structure.
⚙️ Step 21: Attach the hanging hook (17) to the desk frame using screws (K).
⚙️ Step 22: Attach connector plates (18) to the desk frame using screws (H).
⚙️ Step 23: Assemble the drawer handle support (19) and drawer slide mechanism (20) for the drawer unit.
⚙️ Step 24: Connect the drawer unit to the main desk frame.
Desk Top Attachment (Steps 25-30)
⚙️ Step 25: Place the desk top panels (1) onto the assembled desk frame.
⚙️ Step 26: Secure the desk tops using screws (E) and nuts (F).
⚙️ Step 27: For Style C, attach additional support beams (14, 15, 16) using screws (E) and nuts (F).
⚙️ Step 28: For Style B, attach support beams (13, 14, 15) using screws (E) and nuts (F).
⚙️ Step 29: For Style B, attach the cabinet unit to the desk frame using screws (E) and nuts (F).
⚙️ Step 30: For Style B, place and secure the desk top panels (1) onto the frame and cabinet.
Final Assembly and Styles (Steps 31-38)
⚙️ Steps 31-32 (Style B): Attach shelf supports (R) to the cabinet and desk legs using screws (R) and nuts (Q). Attach hanging hook (17) using screws (K).
⚙️ Steps 33-34 (Style C): Attach desk support beams (13, 14, 15) using screws (E) and nuts (F). Note "MORE" / "LESS" labels for shelf positioning.
⚙️ Steps 35-36 (Style C): Secure desk tops (1) using screws (E) and nuts (F). Attach shelf supports (R) using screws (R) and nuts (Q).
⚙️ Steps 37-38 (Style C): Attach hanging hook (17) using screws (K). If opening the right-side door, refer to steps 11, 12, 13, 14.
Customer Support
For assistance, please contact Bestier Customer Support:
| Region | Contact Information |
|---|---|
| North American | 888-666-1086 Service.US@bestier.net |
| Europe | Service.UK@bestier.net Service.FR@bestier.net Service.ES@bestier.net |
| Europe (DE/IT) | Service.DE@bestier.net Service.IT@bestier.net |
| Asia | 488-880-283 Service.JP@bestier.net |
| Global | Service@bestier.net |
Manufactured by Comfort Zone Co., Limited.
