ASUS B650M-AYW WIFI Motherboard Quick Start Guide

Introduction

This quick start guide provides a basic overview of hardware installation for building your system. For detailed explanations, please download the user guide.

1. Hardware Preparation

Gather the following components:

• Computer Case
• CPU (Central Processing Unit)
• Memory (RAM)
• M.2 SSD (Solid State Drive)
• CPU Cooler
• SATA Drive (e.g., HDD or SSD)
• Power Supply Unit (PSU)
• Graphics Card (GPU)

Note: The images provided are examples. Please prepare the necessary components.

2. Installing Major Components

2.1 Installing the CPU

Steps:

1. Open the CPU socket lever by pushing it outwards and lifting it up.
2. Carefully align the CPU's triangle mark with the triangle mark on the socket.
3. Gently place the CPU into the socket. Do not force it.
4. Close the CPU socket lever by pushing it down until it clicks into place.

Important: Before installing the CPU, do not remove the protective cap (PnP cap) from the socket.

For details, refer to the motherboard manual.

2.2 Installing Memory (RAM)

Steps:

1. Open the clips on the DIMM slots.
2. Align the notch on the memory module with the notch in the DIMM slot.
3. Press down firmly on both ends of the memory module until the clips snap into place.

For details, refer to the motherboard manual.

3. Installing M.2 SSD

Steps:

1. Peel off the protective film from the M.2 slot.
2. Insert the M.2 SSD into the slot at an angle.
3. Secure the M.2 SSD using the M.2 Q-Latch, screw, or anchor provided.

Ensure the module is secured with the M.2 Q-Latch, screw, or M.2 anchor.

For single-sided M.2 SSDs, attach the included M.2 rubber pad.

For details, refer to the motherboard manual.

4. Installing Cooling Devices

Choose one of the following cooling methods:

4.1 Air Cooler Installation

Steps:

1. Install the mounting brackets onto the motherboard.
2. Apply thermal paste to the CPU (if not pre-applied).
3. Mount the CPU cooler onto the brackets and secure it.
4. Connect the CPU cooler fan cable to the CPU_FAN or CPU_OPT header on the motherboard.

For details, refer to the cooler and motherboard manuals.

4.2 All-in-One (AIO) Cooler Installation

Steps:

1. Install the mounting brackets onto the motherboard.
2. Apply thermal paste to the CPU (if not pre-applied).
3. Mount the water block onto the CPU and secure it.
4. Connect the water block pump cable to the AIO_PUMP or W_PUMP header.
5. Connect the radiator fan cable to the CPU_FAN or CPU_OPT header.

For details, refer to the cooler and motherboard manuals.

5. Installing the Motherboard into the Case

Steps:

1. Install the I/O shield into the case opening (if your motherboard model includes one).
2. Carefully place the motherboard into the case, aligning it with the standoffs.
3. Secure the motherboard to the case using screws.

For details, refer to the motherboard and case manuals.

6. Connecting Case Fans and ARGB/RGB LEDs

Connect case fans and ARGB/RGB LED strips to the appropriate headers on the motherboard:

• ARGB Header: Typically has pins for Data, +5V, and Ground.
• RGB Header: Typically has pins for +12V, G, R, and B.

For details, refer to the motherboard manual.

7. Installing the Power Supply Unit (PSU)

Steps:

1. Mount the PSU into its designated bay in the computer case and secure it with screws.

Ensure the PSU is securely fastened and that internal airflow is not obstructed.

Power Requirements: AC Input Voltage: 100-240VAC, 50/60Hz, 6-3A.

For details, refer to the case and PSU manuals.

8. Connecting Power Supply Cables

Connect the necessary power cables from the PSU to the motherboard and components:

• Motherboard Power: Connect the 24-pin ATX power connector and the 4/8-pin CPU power connector.
• Graphics Card Power: If your graphics card requires additional power, connect the appropriate PCIe power cable from the PSU.
• SATA Power: Connect to SATA drives (HDDs, SSDs).

For details, refer to the motherboard and PSU manuals.

9. Connecting Various Cables to the Motherboard

Connect the front panel connectors, USB headers, and audio headers:

• Front Panel System Header: Connect the power button, reset switch, HDD LED, and power LED cables.
• Front Panel Audio Header: Connect the front panel audio jacks.
• USB Headers: Connect front panel USB ports.

For details, refer to the motherboard manual.

10. Connecting Ethernet Cable / Wi-Fi Antenna

Connect the Ethernet cable to the LAN port and screw in the Wi-Fi antennas to the rear I/O panel if your motherboard has Wi-Fi capabilities.

For details, refer to the motherboard manual.

11. Connecting Peripherals

Connect your display, keyboard, mouse, and other peripherals to the appropriate ports on your computer.

12. Turning on the Computer

Once all components are installed and connected, you can turn on your computer.

Troubleshooting: If the system does not boot normally, use the Q-LED/Q-LED Core functions (if available) to check component status and consult the motherboard manual for troubleshooting steps.

13. Installing OS and Drivers

After the system powers on, install your operating system (OS) and the necessary drivers and utilities for your hardware.

Important Safety Information

For Safe Use of Electrical Products:

• Always disconnect the power cable before installing or removing components.
• Keep metal objects away from circuit boards to prevent short circuits.
• Ensure the PSU voltage matches your local power supply.

For Safe Work Practices:

• Read and understand this guide before proceeding.
• Handle components with care to avoid damage.
• Work in a clean, dry, and well-lit environment.
• Do not attempt to repair or modify the product yourself.

Handling Button/Coin Cell Batteries:

WARNING: Contains button/coin cell battery. Swallowing can cause severe internal injury or death.

• Keep batteries away from children.
• Seek immediate medical attention if a battery is swallowed.

Compliance and Warranty Information

This product complies with various regulatory standards including FCC, VCCI, and EU directives. Detailed compliance statements and warranty information are available in multiple languages throughout this document and on the ASUS support website.

For comprehensive warranty details and support, please visit: https://www.asus.com/support/

Product Registration

Register your product to receive better support and services.

Visit: https://account.asus.com/