ASUS Pro H810M-C Quick Start Guide

Motherboard Overview

The ASUS Pro H810M-C motherboard features the LGA1851 socket for Intel processors, DDR5 memory slots, M.2 slots for storage, PCIe slots for expansion cards, SATA ports, various USB headers, and front panel connectors. The numbered labels on the motherboard diagram correspond to the installation steps outlined below.

Diagram Description: A top-down view of the ASUS Pro H810M-C motherboard, showing the layout of various connectors and slots. Key components indicated include CPU socket (LGA1851), RAM slots (DDR5 DIMM_A, DDR5 DIMM_B), M.2 slots (M.2_1, M.2_2), PCIe slots (PCIEX16, PCIEX1), SATA ports, front panel connectors (F_PANEL, F_AUDIO), USB headers, power connectors (ATX_PWR, CPU_12V), and rear I/O ports (DP, VGA, HDMI, COM1, DVI, LAN, USB, Audio). Numbered labels correspond to installation steps.

Step 1: Prepare the Components

Gather all necessary components for your build:

• Chassis
• CPU
• CPU Cooler
• Memory (RAM)
• M.2 SSD
• SATA device (e.g., HDD/SSD)
• Power Supply Unit (PSU)
• Graphics Card

Note: The components listed are recommendations. Ensure you have all components according to your needs.

Step 2: Install Key Components

Install the CPU

Diagram Description: Diagrams show how to align the CPU's triangle marker with the socket's triangle marker and gently place it into the LGA1851 socket. An 'X' symbol indicates incorrect placement. Another diagram shows applying thermal paste to the CPU surface.

Instructions:

1. Open the CPU socket lever.
2. Align the CPU's triangle marker with the socket's triangle marker.
3. Gently place the CPU into the socket. Do not force it.
4. Close the CPU socket lever.
5. Apply thermal paste to the CPU surface if your cooler does not have pre-applied paste.

Note: Do not remove the PnP cap before the CPU is properly installed. Please refer to the motherboard manual for more information.

Install the Memory (RAM)

Diagram Description: Diagrams show how to open the clips on the RAM slots, align the notch on the memory module with the slot, and press down firmly on both ends of the module until it clicks into place. It illustrates dual-channel installation.

Instructions:

1. Open the clips on the RAM slots.
2. Align the notch on the memory module with the notch in the RAM slot.
3. Press down firmly on both ends of the memory module until it clicks into place and the clips secure it.

Note: Please refer to the motherboard manual for more information.

Install the M.2 SSD

Diagram Description: Diagrams illustrate two methods (A and B) for installing an M.2 SSD. Method A shows securing the SSD with a screw after it clicks into place. Method B shows an optional rubber piece for single-sided M.2 modules and a Q-Latch mechanism that clicks and locks the SSD. Additional diagrams show the M.2 Q-Release mechanism (Type-A and Type-B) for easier removal.

Instructions:

1. Open the M.2 slot.
2. Insert the M.2 SSD at an angle.
3. Gently push the SSD down and secure it with the provided screw or the Q-Latch mechanism.
4. For single-sided M.2 modules, you may optionally install the bundled M.2 rubber.

Note: Make sure the M.2 Q-Latch clicks and locks the M.2 SSD securely. Insert the pin of the M.2 Anchor into the hole properly.

Step 3: Install the Cooling System

Air Cooler

Diagram Description: Diagrams show how to mount an Air Cooler using screws and brackets onto the motherboard.

Instructions: Follow the cooler's specific instructions to mount it onto the motherboard, ensuring it is securely fastened.

AIO Cooler

Diagram Description: Diagrams show how to mount an AIO cooler using a bracket and screws. It also shows connecting the pump and fan cables to the appropriate motherboard headers (CPU_FAN/CPU_OPT, AIO_PUMP/W_PUMP).

Instructions: Mount the AIO cooler's water block onto the CPU and secure it. Connect the fan cable to the CPU_FAN or CPU_OPT header and the pump cable to the AIO_PUMP/W_PUMP header.

Note: Please refer to the cooler and chassis manuals for more information.

Step 4: Install the Motherboard into the Chassis

Diagram Description: Diagrams show three steps (A, B, C) for installing the motherboard into a chassis. Step A shows installing the I/O shield (for non-pre-mounted models). Step B shows aligning the motherboard with standoffs in the chassis. Step C shows securing the motherboard with screws.

Instructions:

1. Install the I/O shield into the chassis opening (if not pre-mounted).
2. Carefully align the motherboard with the standoffs in the chassis.
3. Secure the motherboard to the chassis using screws.

Note: Please refer to the motherboard and chassis manuals for more information.

Step 5: Connect Cables

Connect to Chassis Fan and ARGB/RGB Headers

Diagram Description: Diagrams show connectors for Chassis Fan, ARGB header (+5V, Data, Ground), and RGB header (+12V, G, R, B).

Instructions: Connect your chassis fans and any ARGB/RGB lighting components to the corresponding headers on the motherboard.

Install and Connect the Power Supply Unit (PSU)

Diagram Description: A diagram shows the PSU being secured to the chassis with screws, with arrows indicating airflow. It also shows the PSU's power cables.

Note: PSU Input: AC 100~240V, 6A/3A, 50/60Hz. Ensure the PSU is securely mounted and the chassis has proper airflow.

Connect Power Cables to the Motherboard

Diagram Description: Diagrams show connecting the main 24-pin ATX power connector and the 8-pin CPU power connector from the PSU to the motherboard.

Instructions: Connect the 24-pin ATX power cable and the 4/8-pin CPU power cable from the PSU to the motherboard.

Note: Please refer to the motherboard and PSU manuals for more information.

Step 6: Install the Graphics Card

Diagram Description: A diagram shows a graphics card being inserted into the primary PCIe x16 slot on the motherboard.

Instructions:

1. Open the retention clip on the PCIe x16 slot.
2. Align the graphics card with the slot and press down firmly until it clicks into place.
3. Secure the graphics card to the chassis with screws.

Note: Power connection may be required for selected models. Please refer to the motherboard, chassis, and graphics card manuals.

Step 7: Connect to the Internet and Peripherals

Connect to the Internet

Diagram Description: Diagrams show rear I/O ports for connecting an Ethernet cable or a Wi-Fi antenna.

Instructions: Connect an Ethernet cable to the LAN port or attach the Wi-Fi antenna to the designated connector.

Note: Please refer to the motherboard manual for more information.

Connect Peripherals

Diagram Description: A setup showing a monitor, keyboard, and mouse connected to the PC.

Instructions: Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports on the motherboard or chassis.

Step 8: Turn on the PSU and Your PC

Diagram Description: A diagram shows a PC case with a power button and an internal connection to the PSU. A QR code is shown for FAQ.

Instructions:

1. Ensure all connections are secure.
2. Turn on the PSU switch.
3. Press the power button on your chassis to turn on the PC.

Note: Please check the Q-LEDs or Q-LED Core on selected motherboards when powering on your PC for system status. If an error occurs, check your CPU Fan header connection or refer to the motherboard manual.

Install the Operating System and Drivers

Instructions: Follow the on-screen prompts to install your operating system (e.g., Windows, Linux) and all necessary drivers from the included media or ASUS support website.

Safety and Operation Information

Electrical Safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• When adding or removing devices, ensure power cables are unplugged before signal cables are connected. If possible, disconnect all power cables before adding a device.
• Before connecting or removing signal cables from the motherboard, ensure all power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord, as these could interrupt the grounding circuit.
• Ensure your power supply is set to the correct voltage for your area. Contact your local power company if unsure.
• If the power supply is broken, do not attempt to fix it yourself. Contact a qualified service technician or your retailer.

Operation Safety

• Before installing the motherboard and devices, carefully read all manuals included in the package.
• Before using the product, ensure all cables are correctly connected and power cables are not damaged. Contact your dealer immediately if damage is detected.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets, and circuitry.
• Avoid dust, humidity, and extreme temperatures. Do not place the product where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems, contact a qualified service technician or your retailer.
• Your motherboard should only be used in environments with ambient temperatures between 10°C and 35°C.

Button/Coin Batteries Safety Information

WARNING: INGESTION HAZARD

• This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN.
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Compliance and Warranty Information

This document contains various compliance statements (FCC, VCCI, UKCA, EU RoHS, etc.) and warranty information provided by ASUS. For detailed information regarding product compliance, environmental regulations, recycling, and warranty terms, please refer to the full documentation available on the ASUS website.

Key Links:

• ASUS Support: https://www.asus.com/support/
• Compliance Information: https://esg.asus.com/Compliance.htm
• Recycling Information: https://esg.asus.com/en/Takeback.htm

The document also includes multilingual instructions for installation steps, safety guidelines, and warranty details in numerous languages, including Dutch, Bulgarian, Croatian, Czech, Danish, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, Slovak, Slovenian, Spanish, Swedish, Turkish, Ukrainian, Vietnamese, Korean, Hebrew, and Arabic.

ASUS Contact Information

ASUSTeK COMPUTER INC.
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
https://qr.asus.com/ProductSafety

ASUS COMPUTER INTERNATIONAL (America)
Address: 48720 Kato Rd., Fremont, CA 94538, USA

ASUS COMPUTER GmbH (Germany and Austria)
Address: Harkortstrasse 21-23, 40880 Ratingen, Germany

ASUSTeK (UK) LIMITED
Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England, United Kingdom

ASUS GLOBAL PTE. LTD.
Address: 10 Changi Business Park Central 2 #02-01 Hansapoint Singapore 486030
https://qr.asus.com/ProductSafety

Service and Support: Visit our multi-language website at https://www.asus.com/support/

Product Register: Log in and register your device for better product support.