Redmi A2 Quick Start Guide

Thank you for choosing Redmi A2.

Getting Started

To turn on the device, press and hold the power button. Follow the on-screen instructions to configure your device.

For more information, visit our official website: www.mi.com/global/service/userguide

SIM Card Information

Do not insert non-standard SIM cards into the SIM card slot, as this may damage the SIM card slot.

Disposal of Electrical and Electronic Equipment (WEEE)

This symbol indicates that this product must not be disposed of with other household waste within the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.

Important Safety Information

Please read the following safety information before using your device:

To prevent possible hearing damage, do not listen at high volume levels for extended periods.
For additional safety information and precautions, please visit www.mi.com/en/certification.
Read all safety information before using the device.
Using unapproved power adapters, chargers, or batteries may cause fire, explosion, electric shock, or other hazards, or damage to the device.
Operate the device within a temperature range of 0°C to 40°C. Operating the device in environments outside this temperature range may damage the device.
If your device has a built-in battery, do not attempt to replace the battery yourself to avoid damaging the battery or device.
Charge the device only with the included or an approved cable and power adapter.
Use only approved accessories that are compatible with the device.
Disconnect the power adapter from the device and the electrical outlet when charging is complete.
Do not charge the device for more than 12 hours.
The battery must be recycled or disposed of separately from household waste. Improper handling of batteries may cause them to explode or catch fire. Follow your local regulations for disposing of the device, batteries, and accessories.
Do not disassemble, strike, crush, or incinerate the battery. If the battery shows signs of deformation, stop using it immediately.
Do not short-circuit the battery to prevent overheating, burns, or other personal injury.
Do not expose the battery to high temperatures. Overheating may cause an explosion.
Do not disassemble, strike, or crush the battery to prevent leakage, overheating, or explosion.
Do not incinerate the battery to prevent fire or explosion.
The battery should not be removed or modified by the user. Battery removal or repair should only be performed by an authorized service center.
Keep the device dry.
Do not attempt to repair the device yourself. If any part of the device is not functioning properly, contact Mi customer support or take your device to an authorized service center.
Connect other devices according to their user manuals. Do not connect incompatible devices to this device.
For AC/DC adapters, the socket-outlet must be installed near the equipment and must be easily accessible.

Safety Precautions

Observe all applicable laws and regulations restricting the use of mobile phones in specific locations and environments.
Do not use your phone at a gas station or in explosive atmospheres, including fueling areas, below deck on ships, fuel or chemical storage or transfer facilities, or areas where the air contains chemicals or particles such as grain, dust, or metal powder. Obey all posted signs indicating the need to turn off wireless devices, such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in areas with potential explosive atmospheres or where required by law to turn off RF devices.
Do not use your phone in operating rooms in hospitals, emergency rooms, or intensive care units. Comply with the hospital and medical center's rules and regulations. If you have a medical device, consult your doctor and the device manufacturer to determine if your phone may interfere with the medical device. To avoid potential interference with a pacemaker, keep a minimum distance of 15 cm between your mobile phone and your pacemaker. To achieve this, use the phone on the opposite ear from the pacemaker and do not carry the phone in your breast pocket. Consult your doctor and the device manufacturer of your medical device to determine if the phone should be used near your medical device.
Observe all airline safety regulations and turn off your device when required on board an aircraft.
Use your phone in accordance with traffic laws and regulations when driving.
To avoid lightning strikes, do not use your phone outdoors during thunderstorms.
Do not use your phone to make calls while charging.
Do not use your phone in high humidity environments, such as bathrooms. This may cause electric shock, damage, fire, or damage to the charger.

RF Exposure Information (SAR)

This mobile phone complies with government requirements for exposure to radio waves. This mobile phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. For body-worn operation, this phone has been tested and meets FCC RF exposure guidelines for use with an accessory that contains no metal and is positioned at a minimum of 1.5 cm from the body. RF exposure compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the human body. This device must maintain a separation distance of at least 1.5 cm from the body to ensure RF exposure levels are in compliance with, or below, the stated limits. Compliance with RF exposure for body-worn accessories containing metal has not been tested and verified, and should therefore be avoided. Any accessory used with this device for body-worn operation must ensure a separation distance of at least 1.5 cm between the body and the device.

FCC Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This mobile phone must be used with shielded cables to ensure compliance with FCC Class B limits.

E-label

This device has an electronic certification label for information. To access it, go to Settings > About phone > Certification, or type "Certification" in the search bar.

Model Information

Model: 23028RN4DG

2302 indicates that this product will be available after February 2023.

Model: MDY-09-EW / MDY-14-EQ

For more information about the adapter, please visit our official website: www.mi.com/global/service/userguide

Disclaimer

This Quick Start Guide is published by Xiaomi or its local affiliated company. Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment may be made by Xiaomi at any time and without notice. Such changes, however, will be incorporated into new online editions of the Quick Start Guide (details can be found on the website www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately represent the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer's Postal Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Brand: Redmi

	Redmi A2 Quick Start Guide A quick start guide for the Redmi A2 smartphone, covering setup, safety information, and regulatory compliance.
	Redmi A2 Quick Start Guide This guide provides essential information for setting up and using your Redmi A2 smartphone, including safety precautions, regulatory compliance, and device specifications.
	Redmi A2 Quick Start Guide This guide provides essential information for setting up and using your Redmi A2 smartphone, including safety precautions, regulatory information, and specifications.
	Redmi A2 Quick Start Guide This document provides a quick start guide for the Redmi A2 smartphone, covering setup, safety information, and regulatory compliance.
	Redmi A2 -puhelimen pikaopas ja turvallisuustiedot Tämä Redmi A2 -puhelimen pikaopas sisältää tärkeimmät tiedot laitteen käyttöönotosta, SIM-kortista, sähkö- ja elektroniikkalaiteromusta (WEEE), akun turvallisuudesta, yleisistä turvallisuusvarotoimista, EU-määräyksistä, SAR-altistumistiedoista ja FCC-vaatimuksista. Opi käyttämään Redmi A2 -puhelintasi turvallisesti ja vastuullisesti.
	Redmi A2 Quick Start Guide This document provides a quick start guide for the Redmi A2 smartphone, covering setup, safety information, and regulatory compliance.
	Redmi A2 Quick Start Guide This document provides a quick start guide for the Redmi A2 smartphone, covering setup, safety information, and regulatory compliance.
	Redmi A2 Quick Start Guide - Setup, Safety, and Compliance Get started with your Redmi A2 smartphone using this quick guide. Learn about setup, SIM card usage, important safety information, WEEE disposal, EU and FCC regulations, SAR exposure, and legal compliance for models like 23028RN4DG.