RAST Chest of 3 Drawers

Safety First! ⚠️

Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints. To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer.
• Do not set TVs or other heavy objects on top of this product.
• Never let children climb or hang on drawers, doors, or shelves.

Tools Required ?️

• Screwdriver (Phillips head)
• Screwdriver (Flat head)
• Hammer
• Pencil
• Drill
• Measuring Tape

Parts & Hardware List

Refer to diagrams for visual identification. Quantities are approximate based on assembly steps.

• Side Panels (2x)
• Top Panel (1x)
• Base Panel (1x)
• Back Support Rails (2x)
• Drawer Runners (4x)
• Back Panel (1x)
• Drawer Fronts (3x)
• Drawer Sides (6x)
• Drawer Backs (3x)
• Drawer Bottoms (3x)
• Drawer Handles (3x)
• Cam Bolts (e.g., 100214, 101345, 153548)
• Cam Locks (e.g., 151705, 151706, 102323)
• Wooden Dowels (e.g., 151705)
• Screws (various types, e.g., 100214, 109049, 151706, 100823, 10087223, 371505, 110519, 106720)
• Wall Mounting Brackets (e.g., 106989)
• Wall Anchors/Plugs (e.g., 109567)
• Drawer Guides (e.g., 121030)

Assembly Steps

1. 1. Prepare the side panels. Insert cam bolts (e.g., 100214, 101345) and wooden dowels (e.g., 151705) into the pre-drilled holes on the inner faces of the two side panels.
2. 2. Attach the base panel (e.g., 146113) and top panel (e.g., 100092) to one side panel. Insert cam bolts into the base/top panels and align with holes on the side panel. Secure by inserting cam locks (e.g., 151706) into the corresponding holes on the side panel and turning them to lock.
3. 3. Attach the second side panel to the base and top panels using cam bolts and cam locks, similar to Step 2.
4. 4. Attach the back support rails (e.g., 10118286) to the rear of the unit using screws (e.g., 100214).
5. 5. Attach the drawer runners (e.g., 153548) to the inside of the side panels using screws (e.g., 109049). Ensure correct orientation.
6. 6. Attach the lower back support rail (e.g., 10118286) to the bottom rear of the unit using screws (e.g., 100214).
7. 7. Slide the back panel into the grooves on the side, top, and base panels.
8. 8. Secure the back panel by screwing through the back support rails into the back panel using screws (e.g., 151706).
9. 9. Attach the top panel (e.g., 100092) to the side panels using cam bolts (e.g., 153548) and cam locks (e.g., 151705).
10. 10. Attach the drawer guides (e.g., 121030) to the inside of the unit's frame using screws (e.g., 109049).
11. 11. Attach the wall mounting brackets (e.g., 106989) to the top rear of the unit using screws (e.g., 100823).
12. 12. Position the unit against the wall where it will be installed.
13. 13. Secure to Wall: Select appropriate wall mounting hardware based on your wall type:
    • Type A (Solid Wall): Use screws (e.g., 100823) directly into the wall.
    • Type B (Hollow Wall): Use screws (e.g., 10087223) with wall anchors (e.g., 109567).
    • Type C (Solid Wood): Use screws (e.g., 371505) without anchors.
    Drill holes in the wall at the desired height, insert anchors if needed, and secure the unit's wall brackets to the wall using the appropriate screws. Ensure the unit is stable and level.
14. 14. Assemble the drawer boxes. Connect the drawer sides (e.g., 118331) to the drawer front (e.g., 110519) and drawer back (e.g., 109564) using screws (e.g., 118331, 106720). Slide the drawer bottom (e.g., 10118587) into the grooves.
15. 15. Attach the drawer handles (e.g., 10118587) to the drawer fronts using screws (e.g., 110519).
16. 16. Insert the assembled drawers into the unit, aligning the drawer runners. Repeat for all drawers.