Assembly Instructions: 43158133 Black Shoe Storage Bench
Product Information
Model Number: 43158133
Product Name: Black Shoe Storage Bench
Brand: Kmart
Important Information
Care Instruction: Wipe clean with a soft dry or damp cloth. Keep away from water and direct sunlight. For indoor and domestic use. Check and tighten all parts regularly.
Warning: Do not stand on the unit. Do not lean on the product. Do not use until all screws, bolts and knobs are firmly secured. This product contains small parts and sharp points, keep away from children and babies. Adult assembly required. Failure to follow these warnings could result in serious injury.
Maximum Total Loading Weight: 4KGS for each shelf, 100KGS for top board, 108KGS in total.
Hardware List
| Part Identifier | Description | Quantity |
|---|---|---|
| a | Bolt (likely hex socket head) | 8 PCS |
| b | Bolt (likely hex socket head) | 8 PCS |
| Tool | Hex Socket Bolt Wrench (Provided) | 1 |
Parts Identification
| Part | Description | Quantity |
|---|---|---|
| A | Side Frame (Rectangular with pre-drilled holes) | 2 PCS |
| B | Vertical Support Rod | 2 PCS |
| C | Horizontal Shelf Support Rod | 6 PCS |
| D | Top Horizontal Bar | 2 PCS |
| E | Top Panel | 1 PC |
Assembly Steps
Step 1
Attach two side frames (A) together using two bolts (a). This forms the base structure, likely connecting bottom shelf supports.
Step 2
Insert two vertical support rods (B) into the top of each side frame (A). Attach six horizontal shelf support rods (C) between the vertical rods (B) and the side frames (A).
Step 3
Attach two top horizontal bars (D) to the top of the side frames (A) using two bolts (a).
Step 4
Attach the remaining horizontal shelf support rods (C) to the side frames (A) and vertical rods (B). Secure these using eight bolts (b).
Step 5
Place the top panel (E) onto the assembled frame. Secure the top panel (E) using four bolts (a).
