Sport Storage Medium
Key Code: 43170999
Hardware list
- Bolt (A x 12pcs)
- Washer (B x 12pcs)
- Wrench (C x 1pc)
- Wheel (D x 2pcs)
- Wheel with brake (E x 2pcs)
Part list
- Narrow side frame (F x 2pc)
- Long side frame (G x 1pc)
- Long side frame with straps (H x 1pc)
- Bottom frame (I x 1pc)
Assembly Instructions
Note: Keep the bolt 70% of tightness while assembling, then fasten all the bolts with wrench after fully assembled.
- Put the narrow side frame (F) and bottom frame (I) together, then secure them with bolt (A) and washer (B). See Figure 1.
- Put another narrow side frame (F) and the part from step 1 together, then secure them with bolt (A) and washer (B). See Figure 2.
- Stand up the frame of the part. Put the long side frame (G) and the part from step 2 together, then secure them with bolt (A) and washer (B). See Figure 3.
- Put the long side frame with straps (H) and the part from step 3 together, then secure them with bolt (A) and washer (B). Screw the 4pcs wheels (D & E) into the nut at the bottom of the frame, then your storage is successfully assembled. See Figure 4.
Figure 1: Shows two narrow side frames connected to the bottom frame.
Figure 2: Shows the structure from Figure 1 with another narrow side frame added.
Figure 3: Shows the assembled frame standing upright with a long side frame attached.
Figure 4: Shows the complete storage unit with wheels attached, including two wheels with brakes.
FOR AU/NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
Made in China
