Assembly Instruction
43028832 Oak Look and White Storage Seat
Important Warnings:
WARNING: DO NOT STAND OR LEAN ON THE UNIT. DO NOT USE THIS UNIT AS A STEP LADDER. ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT USE THIS UNIT UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED. DO NOT PLACE HOT OBJECTS SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF THIS FURNITURE ITEM. CONTAINS SMALL PARTS. IT IS TO BE ASSEMBLED BY AN ADULT. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
Care Instructions:
WIPE CLEAN WITH A SOFT DAMP CLOTH. NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT. STORE IN A DRY PLACE FOR INDOOR USE ONLY.
MAXIMUM SAFE LOAD: 70KG FOR SEATER, 5KG FOR EACH CABINET.
Hardware List
| Part | Description | Quantity |
|---|---|---|
| a | M4x35mm | 20pcs |
| b | Ø6x30mm | 21pcs |
| c | M2x16mm | 12pcs |
| d | 2pcs | |
| e | 4pcs | |
| f | M3x12mm | 10pcs |
| g | 2pcs | |
| h | M3x14mm | 4pcs |
| i | M4x45mm | 4pcs |
| j | M4x18mm | 4pcs |
| k | Ø6x15mm | 16pcs |
Diagrams:
Visual representation of parts labeled 1 through 11, showing their shapes and quantities.
Assembly Tip: Do not tighten the screws fully during assembly. Fully tighten screws after the final assembly steps.
Assembly Steps
Step 1:
Attach parts 'd' (2pcs), 'e' (4pcs), and 'f' (10pcs) to the base panel (labeled '8').
Step 2:
Attach parts 'g' (2pcs) and 'h' (4pcs) to the top panel (labeled '3').
Step 3:
Connect side panels (labeled '6') using parts 'a' (2pcs) and 'b' (3pcs).
Step 4:
Attach the base panel (labeled '4') to the side panels using parts 'b' (6pcs) and 'i' (4pcs).
Step 5:
Assemble the side structure using parts 'a' (2pcs) and 'b' (2pcs), connecting to panels labeled '4' and '5'.
Step 6:
Continue assembling the main frame using parts 'a' (2pcs) and 'b' (2pcs), connecting panels labeled '3', '4', '5', and '8'. Part '9' is also attached.
Step 7:
Further assemble the unit using parts 'a' (7pcs) and 'b' (4pcs), connecting panels labeled '1', '2', '3', '4', '6', and '9'.
Step 8:
Continue assembling the main structure using parts 'a' (7pcs) and 'b' (4pcs), connecting panels labeled '1', '3', '5', '6', '8', and '9'.
Step 9:
Attach parts 'j' (4pcs) and '1' (4pcs) to the top section, connecting to panels labeled '11' and '2'.
Step 10:
Secure the top panel (labeled '3') using parts 'c' (12pcs) to the assembled unit, connecting to panels labeled '2' and '10'.
Step 11:
Complete the assembly by attaching parts 'k' (16pcs) to the exterior of the unit, securing panels labeled '1' and '11'.
