Holmes Air Purifier Owner's Guide

Aer1® Filter Series

Congratulations on your new air purifier, equipped with the new and improved Aer1® Total Air Filter(s).

Filter Types and Benefits

Warranty Information

3 Year Limited Warranty

Jarden Consumer Solutions (JCS) warrants this product to be free from defects in material and workmanship for three years from the date of purchase. JCS will repair or replace the product or component at its option. This warranty is for the original retail purchaser and requires proof of purchase. It does not cover normal wear, misuse, or damage from acts of God. JCS is not liable for incidental or consequential damages. Implied warranties are limited to the duration of this express warranty.

Obtaining Warranty Service

In the U.S.A. and Canada, call 1-800-546-5637 for warranty service. Do not return the product to the place of purchase or provided addresses.

Important Safety Instructions

• Read all instructions before using the appliance.
• Plug directly into a 120V AC electrical outlet to avoid fire or shock hazard.
• Remove plastic bag from filter before use if shipped covered.
• Keep cord out of heavy traffic areas; do not place under rugs or near heat registers.
• DO NOT immerse the appliance in water or other liquids; do not use near water.
• Close supervision is necessary when used by or near children or disabled persons.
• Always unplug the air purifier before moving, cleaning, opening the grill, or changing filters. Pull the plug, not the cord.
• NEVER drop or insert objects into unit openings.
• DO NOT operate with a damaged cord or plug. Return for examination/repair if motor fails or unit is damaged.
• Use only for intended household use; unauthorized attachments may cause hazards.
• DO NOT use outdoors.
• NEVER place on soft surfaces (bed, sofa) that could block air inlet/outlet grills.
• Keep unit away from heated surfaces and open flames.
• DO NOT attempt to repair or adjust electrical/mechanical functions; this voids the warranty. Servicing by Jarden Consumer Solutions or authorized center only.
• DO NOT place anything on top of the unit.
• NEVER use detergents, gasoline, glass cleaner, furniture polish, paint thinner, or other solvents for cleaning.
• Always turn the appliance off before unplugging.
• The ionizer produces less ozone than UL limits, but high concentrations can be harmful to birds/small pets. Use ionizer in well-ventilated areas with the fan on to prevent ozone buildup.
• Use only in rooms with temperatures between 40°F and 110°F.
• ⚠️ Warning: To reduce fire/electric shock risk, DO NOT use with any solid-state speed control device.

Polarized Plug Warning: This appliance has a polarized plug (one blade wider than the other). To reduce electric shock risk, it fits in a polarized outlet only one way. If it does not fit fully, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to modify this plug or defeat this safety feature.

Features

Cord Safety

The cord length is selected to reduce tangling/tripping hazards. Use an approved extension cord if needed, ensuring its electrical rating is equal to or greater than the air purifier's. Arrange cords to prevent pulling or tripping.

Get to Know Your Air Purifier

This unit is compatible with all Aer1® Filters, allowing you to choose the best filter for your needs. See the "Aer1® Filter Series" section for details.

Ionizer

The optional ionizer releases negative ions into filtered air to aid the purification process. Ions are naturally occurring charged particles. Negative ions attach to airborne particles, causing them to clump together and be more easily captured by the filter. Occasional popping/cracking sounds are normal. Dust attraction around grills indicates the ionizer is working. To help prevent particle attraction to surfaces, you may run the ionizer less often or check filters more frequently.

⚠️ Caution: The ionizer produces minimal ozone, but in high concentrations, it can be harmful to birds and small pets. Use in well-ventilated areas with the fan on.

Speed Settings

Choose from HIGH (3), MEDIUM (2), or LOW (1) speed settings using the Speed Control Knob. For optimum filtration, continuous operation on MEDIUM is recommended. LOW is for quieter operation, and HIGH is for quickly circulating and filtering air during high pollution levels.

Operations

Filter Check Indicator

The Filter Check Indicator light reminds you to check and change filters every 4 months. To reset the indicator, press and hold the Filter Reset Button (C) for 3 seconds while the unit is powered on. The light will blink three times and turn off.

Before Use

1. Carefully unpack the air purifier.
2. Select a firm, level location with unobstructed air inlet and filtered air outlets.
3. Remove any plastic bag covering the filter(s).
4. Reinstall the air inlet grill.
5. DO NOT point the filtered air outlet towards a wall.

Operating Instructions

1. Plug the unit into a 120V AC electrical outlet.
2. Select the desired operating speed (HI, MEDIUM, LOW) using the Speed Control Knob. Continuous operation is recommended.
3. To activate the ionizer, press the Ionizer Button (E). The outer ring will illuminate blue. The ionizer only works when the unit is running.

Diagram: Unit Components (Figure 1)

The air purifier includes the following components: A. Control Panel, B. Speed Control Knob, C. Filter Reset Button, D. Filter Check Indicator Light, E. Ionizer Button, F. Filtered Air Outlet, G. Aer1® Filter(s), H. Washable Foam Pre-Filter, I. Air Inlet Grill.

Cleaning and Maintenance

General Cleaning

1. Turn the air purifier off and unplug it before cleaning.
2. Clean the exterior with a soft, clean, damp cloth.
3. Remove the air inlet grill (I), wash in warm soapy water (not dishwasher safe), and dry thoroughly before replacing.
4. Clean the filtered air outlet (F) with a small, soft brush.
5. Clean the inside of the air purifier with a dry, soft cloth.

Filter Replacement

Important Notes

• DO NOT attempt to wash and re-use Aer1® Filters.
• Remove plastic bags from filters before use.
• Filter life varies: Aer1® Total Air, Odor, and Smoke Filters last approximately 4 months. Allergen Filters last approximately 12 months.
• The Filter Check Indicator will alert you to service filters.

Filter Replacement Procedure

1. Turn off and unplug the air purifier.
2. Open the air inlet grill (I). Examine and clean the black foam pre-filter (H) by washing in warm soapy water, rinsing, and drip drying.
3. Remove the used Aer1® filter(s) (G) by gently pulling towards you and discard. DO NOT clean Aer1® filters.
4. Install the new Aer1® filter(s). The model uses a hang tab and filter clips. Ensure the hang tab is secure.
5. Align the filter clip on the side of the filter with the rails inside the purifier unit. Gently slide the filter onto the rail. (See Figures 2 & 3).
6. Replace the air inlet grill.
7. To reset the Filter Check Indicator, press and hold the Filter Reset Button (C) for 3 seconds while the unit is powered on. The indicator light will blink three times and turn off.

Diagram: Filter Installation (Figures 2 & 3)

Figures 2 and 3 illustrate the filter clip mechanism and how to align the filter clip with the rails inside the purifier unit for proper installation.

Filter Compatibility