Manuals+

Ecotap DC180 Electric Vehicle Charging Station

A brand of Legrand

General Characteristics

Reference number 80180001 / 80180002
Dimension H x W x D (mm) 2070 mm x 580 mm x 805 mm
Casing material Steel 2.2 mm
Standard colour Body: Ral 9016 / Cover: Ral 9016
Steel treatment Anti-corrosion (KTL) and powder coating
Weight (kg) ± 500 kg
Number of charging points 1 (80180002) or 2 (80180001)
Cable CCS2

Electrical Characteristics

AC input voltage 3 x 400VAC + N ± 10%
AC input current and power (line-side) 270A at 180 kW DC output power
AC input Frequency (fn) 50Hz
DC output power range 1 - 180 kW CCS or 2 - 90 kW
DC output voltage range 200 - 1000 Vdc
DC output current range 0 - 300A
DC output voltage stabilized accuracy ≤ ±0.5%
DC output current stabilized accuracy ≤ ±1%
Efficiency > 95% @full charge
THDi (Total harmonic distortion) < 5% (load 50% to 100%)
Power factor > 0.99 (load 100%); > 0.98 (load 50% to 100%)
Mains type TN-C, TN-S, TN-C-S or TT
Impulse voltage (Uimp) 4kV
Insulation voltage (Ui) 230V single-phase, 500V three-phase
Integrated protection system Fuse 315A gG + Each PSU MCB 80A Curve C & RCD 63A Type B
Conditional short-circuit 6000A IEC/EN 60898-1, 10kA IEC/EN 60947-2
Allowable thermal stress in Short Circuit 16 000 A²s
Integrated surge protection Included
Standby consumption (W) < 84W
Connection to the mains Phases, Lug terminals M10; Earth, Lug terminals M8
Tightening Torque 30 - 44 N.m for M10, 22 - 36 N.m for M8
Type of load Mode 4 charging terminal
Vehicle connection Mode 4 attache cable connector Use of extension and adapter prohibited. 80180001 / 80180002: 6.5m straight 300A CCS2
AC meter Not included
DC meter Not included
Back office protocol OCPP 1.6 Json
Positioning GPS
Connectivity Ethernet RJ45 connector

Environment

Operating temperature -25°C / +50°C
Storage temperature -25°C / +80°C
Relative humidity 0 to 90% without condensation
Corrosivity class C4 according to the IEC 9223 and IEC 12944, 3C3/4C3 according to the IEC 60721-3
Protection rating IP 54 (IEC 60529), IK 10 (EN 62262) Plugged in or not
Vandalism resistance IK 10
Noise level < 72 dB at 1m at 20° C, at full charging
Product IEC 61851-1, IEC TS 61439-7 (AEVCS), IEC 61851-23, IEC 62477-1, IEC 61439-1
DC standard protocol (communications with the vehicle) CCS2: IEC 61851-23 / DIN SPEC 70121
Installation Interior or exterior, limited access zone, intended for use by ordinary persons (DBO), assembly in cabinet (wall mounted), Pollution Degree 3, TN-C, TN-S, TN-C-S or TT compatible earthing system. In the event of an IT earthing system, this can be changed locally by adding an isolating transformer.
Electrical safety Class 1 IEC 61140
Eichrecht conform No

Electromagnetic Compatibility

European standards Low Voltage Directive 2014 / 35EU / EMC Directive: 2014 / 30 / EU
Radio technology type GSM 2G/3G/4G, GPRS, RFID
Suitable charging cards Mifare, Ntag and iCODE SLI cards

PDF preview unavailable. Download the PDF instead.

DC180-specs-EN Adobe PDF Library 17.0 Adobe InDesign 20.4 (Windows)

Related Documents

Preview Ecotap DC180 Electric Vehicle Charging Station Specifications
Detailed technical specifications for the Ecotap DC180, a high-power electric vehicle charging station from Ecotap, a brand of Legrand. Covers general and electrical characteristics, environmental conditions, and electromagnetic compatibility.
Preview Ecotap DC180 EV Charger - Technical Specifications
Detailed technical specifications for the Ecotap DC180 electric vehicle charging station, including electrical, environmental, and protection features. Compatible with CCS2.
Preview Ecotap DC30 EV Charging Station - Technical Specifications
Detailed technical specifications for the Ecotap DC30 electric vehicle charging station, including general, electrical, environmental, and electromagnetic compatibility data. This product is from Ecotap, a brand of Legrand.
Preview Ecotap DC120 DC Fast Charger Specifications
Detailed specifications for the Ecotap DC120 DC fast charger, including general, electrical, environmental, and electromagnetic compatibility features. This charger is a product of Ecotap B.V., a brand of Legrand.
Preview Ecotap DC60 Electric Vehicle Charging Station Specifications
Detailed technical specifications for the Ecotap DC60 electric vehicle charging station, covering general and electrical characteristics, environmental factors, and electromagnetic compatibility. Includes information on voltage, current, power, dimensions, materials, and compliance standards.
Preview Ecotap DC120 Electric Vehicle Charging Station Technical Specifications
Detailed technical specifications for the Ecotap DC120 electric vehicle charging station, including electrical, environmental, and electromagnetic compatibility data. Features CCS2 charging and compliance with relevant European standards.
Preview Ecotap DC30 EV Charger Technical Specifications
Detailed technical specifications for the Ecotap DC30 electric vehicle charging station, covering general, electrical, environmental, and electromagnetic compatibility characteristics. Includes product details, performance metrics, and compliance information.
Preview Ecotap DC60 DC Fast Charger Manual and Technical Specifications
Comprehensive manual for the Ecotap DC60 DC fast charger, covering installation, operation, safety, maintenance, and technical specifications. Learn how to safely install and use your Ecotap DC charger.