Cecotec READY WARM 9890 FORCE ROTATE
Termoventiladores / Fan Heater
This product is not suitable for primary heating purposes. This product is only suitable for well insulated spaces or occasional use.
The product is a white Cecotec fan heater with a rounded top and a base. It features a grille on the front, two control knobs on the top surface, and a power switch on the front base.
Safety Instructions
Read these instructions thoroughly before using the appliance. Keep this manual for future reference or new users.
Ensure mains voltage matches the product's rating label and the outlet is grounded. Always turn off and unplug the appliance when not in use and before moving it. Pull the plug, not the cord, to disconnect.
Avoid extension cords as they may overheat and cause a fire risk. Do not cover air inlet or outlet openings during operation.
Do not immerse the cord, plug, or any part of the product in water or other liquids. Ensure hands are dry before handling the plug or switching on the appliance.
Regularly inspect the power cord for visible damage. If damaged, it must be replaced by Cecotec's official Technical Support Service to avoid danger.
Do not place the product directly below a socket. This appliance is for domestic use only; not for commercial or industrial purposes.
Keep away from heat sources, flammable substances, wet surfaces, or water. Do not use outdoors. Do not insert objects into air inlets/outlets, as this may cause electric shock, fire, or damage.
Age Restrictions: Not for children aged 0-8 years. Children aged 8+ may use it under continuous supervision.
Use by Persons with Reduced Capabilities: This product can be used by individuals with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, if supervised or instructed on safe use and understand the risks.
Supervise children to ensure they do not play with the appliance. Close supervision is necessary when the product is used by or near children.
Parts and Components
Figure 1 shows the fan heater with numbered parts: 1. Temperature selector, 2. Power-level selector, 3. Power light indicator, 4. Oscillation push button.
Before Use
Remove the product from the box and all packaging material.
Check for any visible damage. If damage is observed, contact Cecotec Technical Support as soon as possible for advice or repair.
Place the heater on a flat and stable surface.
Operation
Temperature selector: Turn clockwise to increase temperature, anticlockwise to decrease.
Power-level selector:
| Symbol Description | Function |
|---|---|
| Fig. 2 [0] | Off |
| Fig. 3 [~] | Fan |
| Fig. 4 [|] | Low-power heating |
| Fig. 5 [||] | High-power heating |
Oscillation push button: Press to make the device oscillate side-to-side, spreading warm air.
Cleaning and Maintenance
Turn off, unplug, and allow the appliance to cool down before cleaning.
Do not use abrasive scouring pads, powders, or cleaners.
Use a soft, dampened, clean cloth for the outer housing. Be careful not to touch the heating elements.
If the heater will not be used for an extended period, store it in a dry, safe place protected from dust.
Technical Specifications
- Product reference: 05802
- Product: Ready Warm 9890 Force Rotate
- Power: 2000-2400 W
- Voltage: 220-240 V~
- Frequency: 50-60 Hz
- Made in China | Designed in Spain
Disposal of Old Electrical Appliances
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) specifies that old household electrical appliances must not be disposed of with normal municipal waste. They must be collected separately to optimize material recovery and recycling, reducing impact on human health and the environment.
The crossed-out wheeled bin symbol [Symbol of a crossed-out wheeled bin] reminds you of your obligation for correct disposal.
Consumers should contact local authorities or retailers for detailed information on the proper disposal of old appliances and/or batteries.
Technical Support and Warranty
This product has a 2-year warranty from the date of purchase, provided proof of purchase is submitted, the product is in perfect physical condition, and it has been used properly as instructed in this manual.
The warranty does not cover:
- Misuse, damage from accidents, moisture, immersion in liquids, unauthorized modifications, or faults attributable to the consumer.
- Products disassembled, modified, or repaired by persons not authorized by Cecotec's official Technical Support Service.
- Faults arising from normal wear and tear of parts due to use.
The warranty service covers manufacturing defects for 2 years, according to current legislation, excluding consumable parts. Misuse by the user will void the warranty.
For any issues or queries, contact Cecotec Technical Support Service at +34 963 210 728.
