Cecotec Ready Warm 7200 Quartz Rotate Smart

Product Overview

The Cecotec Ready Warm 7200 Quartz Rotate Smart is a quartz heater designed for use in well-insulated spaces or for occasional heating needs. It is not intended for primary heating purposes.

⚠️ Safety Instructions

• Ensure mains voltage matches the rating label and the wall outlet is grounded.
• This appliance is for household use only; do not use for industrial or commercial purposes.
• Do not immerse the cord, plug, or any part in water or other liquids. Ensure hands are dry before handling the plug or switching on.
• Place the appliance on a flat, stable, and safe surface.
• Regularly inspect the power cord for visible damage. Damaged cords must be replaced by authorized service to avoid danger.
• Keep the appliance away from heat sources, flammable substances, and wet surfaces. Do not operate outdoors.
• Do not cover the appliance during operation.
• Do not insert objects into air inlets or outlets, as this may cause electric shock, fire, or damage.
• Always turn off and unplug the appliance when not in use and before moving. Pull the plug, not the cord.
• Avoid extension cords, as they may overheat and cause fire.
• Do not place the appliance directly below a power socket.
• Not intended for use by children under 8 years old. Children aged 8 and above can use it under continuous supervision.
• Can be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience, if supervised or instructed on safe use and hazards.
• Supervise young children to ensure they do not play with the appliance. Close supervision is necessary when used by or near children.

Before Use

1. Remove the product from the box and all packaging materials.
2. Inspect the appliance for any visible damage. If damage is observed, contact Cecotec Technical Support Service immediately for advice or repair.
3. Place the heater on a flat, safe surface, ensuring it is not under a power socket.

Product Assembly

Warning: Ensure the product is properly assembled before operating.

The appliance consists of a main body, a base plate, and a remote control. Assembly involves attaching the main body to the base plate using butterfly nuts and routing the power cord.

The numbered parts shown in the diagram are:

• 1. Outer housing
• 2. Base plate
• 3. Butterfly nut (x 2)
• 4. Tip-over safety switch
• 5. Power cord
• 6. Remote control

1. Remove the butterfly nuts from the lower part of the appliance.
2. Pass the power cord through the slot in the center of the base plate and attach the appliance body to the base plate.
3. Use the two butterfly nuts to secure the appliance body to the base plate.
4. Insert the power cord through the suitable slots and fix it by the clamp.

Operation

Power Levels 11

Heating power levels are controlled by buttons on the bottom of the appliance:

• 0: OFF
• 1: 400 W
• 2: 800 W
• 3: 1200 W

Oscillation ()

Press the oscillation button once to activate; press again to deactivate.

Remote Control

Power levels and functions can be controlled via a remote control.

Timer ()

Press the timer button to activate. Lights will indicate the selected time.

Safety System

The appliance has a safety system that automatically turns off the device when tilted or lifted.

? Cleaning and Maintenance

• Always turn off, unplug, and allow the appliance to cool down before cleaning.
• Do not use abrasive scouring pads, powders, or cleaners.
• Use a soft, damp cloth to clean the outer housing. Be careful not to touch the heating elements.
• If the heater is not used for a long period, store it in a dry, safe place protected from dust.

Technical Specifications

Model: Ready Warm 7200 Quartz Rotate Smart

Product reference: 05325

Power: 1200 W

Voltage: 220-240 V~ 50/60 Hz

Made in: China | Designed in: Spain

Technical Specifications Table

Information requirements for electric local space heaters:

♻️ Disposal of Old Electrical Appliances

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) mandates that old household appliances must not be disposed of with unsorted municipal waste. They must be collected separately to optimize material recovery and recycling, reducing environmental impact.

The [crossed-out bin] symbol on the product signifies your obligation for correct disposal. If the product contains a built-in battery or uses batteries, these must be removed and disposed of separately.

For detailed disposal information, contact local authorities or retailers.

Warranty and Technical Support

This product has a 2-year warranty from the date of purchase, provided proof of purchase is submitted, the product is in perfect physical condition, and it has been used as instructed in this manual.

The warranty does not cover:

• Product used beyond its capacity, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, or any fault attributable to the consumer.
• Product disassembled, modified, or repaired by unauthorized persons.
• Faults arising from normal wear and tear of parts due to use.

The warranty covers manufacturing defects for 2 years, except for consumable parts. Misuse by the user will void the warranty.

For any issues or inquiries, contact Cecotec Technical Support Service at +34 963 210 728.