Cecotec ReadyWarm 9750 Rotate Force

Safety Instructions

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• Ensure the mains voltage matches the appliance's rating label and that the wall outlet is grounded.
• Always turn off and unplug the appliance when not in use and before moving it. Pull from the plug, not the cord, to disconnect.
• Avoid using extension cords, as they could overheat and cause a fire risk.
• Do not cover the air inlet or outlet during operation.
• Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid. Ensure electrical connections are kept dry. Make sure your hands are dry before handling the plug or switching on the appliance.
• Check the power cord regularly for visible damage. If damaged, it must be replaced by the official Cecotec Technical Support Service to avoid danger.
• The appliance must not be placed immediately below a socket.
• This product is designed for household use only. Do not use for industrial or commercial purposes.
• Do not place the appliance near heat sources, flammable substances, or wet surfaces. Avoid contact with water or other liquids. Do not operate outdoors.
• Do not introduce or allow objects to be introduced into the air inlet or outlet, as this could cause risk of electrical shock, fire, or damage.
• The appliance is not intended for use by children under 8 years old. It can be used by children over 8, provided they receive continuous supervision.
• This product can be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they receive supervision or instruction on safe use and understand the hazards involved.
• Supervise young children to ensure they do not play with the appliance. Close supervision is necessary when the appliance is used by or near children.

1. Parts and Components

Refer to the diagram below:

2. Before Use

• Take the product out of the box and remove all packaging materials.
• Check for any visible damage. If any is observed, contact the Cecotec Technical Support Service as soon as possible for advice or repair.
• Always place the device on a flat and stable surface.

3. Operation

• Turn the temperature knob clockwise to increase temperature, and anticlockwise to decrease it.
• Power level knob:

Oscillation switch: Press the switch for the appliance to oscillate from one side to another and to spread heat.

4. Cleaning and Maintenance

• Turn off and unplug the appliance and allow it to cool down before cleaning it.
• Do not use abrasive cleaners or scouring pads to clean the product.
• Use a soft, dampened cloth to clean the product's outer housing. Be careful not to touch the heating element.

Storage

• If the product is not going to be used for a long period of time, unplug it and store it in a dry and safe place where it is protected from dust.
• To avoid overheating, do not disconnect the appliance from the plug; turn it off using the power button instead.

5. Technical Specifications

Model: Ready Warm 9750 Rotate Force

Product reference: 05305

Power levels: 1200-2400 W

Voltage: 220-240 V

Frequency: 50/60 Hz

Origin: Made in China | Designed in Spain

6. Disposal of Old Electrical Appliances

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) specifies that old household electrical appliances must not be disposed of with normal unsorted municipal waste. Old appliances must be collected separately to optimize the recovery and recycling of their materials and reduce the impact on human health and the environment.

The [WEEE symbol - crossed-out wheeled bin] symbol on the product reminds you of your obligation to dispose of the appliance correctly.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

7. Technical Support and Warranty

This product is under warranty for 2 years from the date of purchase, provided that proof of purchase is submitted, the product is in perfect physical condition, and it has been used properly as explained in this instruction manual.

The warranty will not cover the following situations:

• The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, or any other fault attributable to the customer.
• The product has been disassembled, modified, or repaired by persons not authorized by the official Cecotec Technical Support Service.
• Faults deriving from normal wear and tear of its parts due to use.

The warranty service covers manufacturing defects for 2 years, based on current legislation, excluding consumable parts. In the event of misuse, the warranty will not apply.

If you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210 728.