This product is not suitable for primary heating purposes. This product is only suitable for well insulated spaces or occasional use.
Product Components
The diagram shows the front of the upright fan heater. Key components are labeled with numbers:
- 1. Temperature knob
- 2. Power-level knob
- 3. Power light indicator
- 4. Oscillation switch
Safety Instructions
- Ensure mains voltage matches the appliance rating label and the wall outlet is grounded.
- Always turn off and unplug the appliance when not in use and before moving it. Pull the plug, not the cord.
- Avoid extension cords as they can overheat and cause fire.
- Do not cover air inlet or outlet openings during operation.
- Do not immerse the cord, plug, or any part of the product in water or other liquids. Ensure hands are dry before handling the plug or switching on.
- Regularly inspect the power cord for visible damage. Damaged cords must be replaced by official Cecotec Technical Support.
- Do not place the device directly below a socket-outlet.
- This product is intended for household use only, not for industrial or commercial purposes.
- Keep away from heat sources, flammable substances, and wet surfaces. Do not operate outdoors.
- Do not insert objects into air inlets or outlets to prevent electric shock, fire, or damage.
- The appliance is not intended for children under 8 years. Children aged 8 and above require continuous supervision.
- Persons with reduced physical, sensory, or mental capabilities, or lack of experience, can use the appliance if supervised or instructed on safe use and potential risks.
- Supervise children to ensure they do not play with the appliance.
Before Use
- Remove the product from the box and all packaging materials.
- Check the appliance for visible damage. If damage is observed, contact Cecotec Technical Support for advice or repair.
- Place the heater on a flat and stable surface.
Operation
- Temperature knob: Turn clockwise to increase temperature, counter-clockwise to decrease.
- Power-level knob:
- Symbol 0: OFF
- Symbol ~: FAN
- Symbol I: LOW-POWER HEATING
- Symbol II: HIGH-POWER HEATING
- Oscillation switch: Press to make the appliance oscillate for better warm air circulation.
Cleaning and Maintenance
- Turn off, unplug, and allow the appliance to cool before cleaning.
- Do not use abrasive scouring pads, powders, or cleaners.
- Use a soft, damp cloth for the exterior. Be careful not to touch the heating elements.
- If the heater is not used for a long period, store it in a dry, safe place protected from dust.
Technical Specifications
| Item | Value | Unit | Description |
|---|---|---|---|
| Model | Ready Warm 9750 Rotate Force | - | - |
| Product reference | 05305 | - | - |
| Nominal heat output | 2.0-2.4 | kW | Manual heat charge control, with integrated thermostat |
| Minimum heat output (indicative) | 1.2 | kW | Manual heat charge control with room and/or outdoor temperature feedback |
| Maximum continuous heat output | 2.4 | kW | Electronic heat charge control with room and/or outdoor temperature feedback |
| Auxiliary electricity consumption (standby) | 0 | kW | Fan assisted heat output |
| Room temperature control | - | - | Electronic room temperature control |
Disposal of Old Electrical Appliances
Follow the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). Do not dispose of with municipal waste. Dispose of separately for optimal recovery and recycling of materials to reduce environmental impact.
The symbol of a crossed-out wheeled bin indicates your obligation for correct disposal. If the product contains a battery, remove it and dispose of it separately as a different waste category. Contact local authorities for detailed disposal information.
Technical Support Service and Warranty
This product has a 2-year warranty from the date of purchase, provided proof of purchase is submitted, the product is in perfect physical condition, and it has been used properly as per this manual.
The warranty does not cover:
- Misuse, damage, exposure to moisture, immersion in liquids, unauthorized repairs, or faults attributable to the consumer.
- Normal wear and tear of parts.
The warranty covers manufacturing defects for 2 years, except for consumable parts. Misuse will void the warranty.
For any issues or inquiries, contact Cecotec Technical Support at +34 963 210 728.
Contact Information
Website: www.cecotec.es
Manufacturer: Grupo Cecotec Innovaciones S.L.
Address: C/de la Pinadeta s/n, 46930 Quart de Poblet, Valencia, Spain.
