SKANSNÄS Chair Assembly Instructions

Parts List

1x Allen key (Part No. 100049)
4x Threaded bolt (Part No. 10121904)
2x Screw (Part No. 105298)
1x Screw (Part No. 102930)
3x Screw (Part No. 145706)
3x Screw (Part No. 106553)
4x Cylindrical connector/nut (Part No. 10102031)
3x L-bracket (Part No. 10101711)
1x Adhesive pad sheet (with 6 pads) (Part No. 10080238)

General Assembly Advice

Before starting assembly, ensure you have all parts. Assemble on a soft surface like a rug to avoid scratching. [Warning] Do not use power tools unless explicitly indicated.

Step 1: Prepare Legs

Place the chair frame upside down on a soft surface. Apply the 6 adhesive pads (Part No. 10080238) to the bottom of each leg.

Visual: Shows chair legs with adhesive pads being applied.

Step 2: Attach Side Rails to Legs

Attach the side rails to the front and back legs using screws (Part No. 10121904). Ensure the correct orientation of the parts.

Visual: Shows side rails being attached to leg assemblies with screws.

Step 3: Prepare Connector Bar

Insert a cylindrical connector/nut (Part No. 10102031) into the designated hole on a long bar.

Visual: Close-up of a cylindrical connector being inserted into a bar.

Step 4: Attach Side Rail to Leg Assembly

Attach the side rail to the leg assembly using threaded bolts (Part No. 10102031). Tighten using the Allen key (Part No. 100049).

Visual: Shows a side rail being connected to the leg assembly with bolts and the Allen key.

Step 5: Insert Allen Key

Insert the Allen key (Part No. 100049) into the appropriate fitting.

Visual: Close-up of Allen key insertion.

Step 6: Prepare Another Connector Bar

Insert a cylindrical connector/nut (Part No. 10102031) into a part.

Visual: Shows a cylindrical connector being inserted into a part.

Step 7: Attach Side Rail to Leg Assembly

Attach the side rail to the leg assembly using threaded bolts (Part No. 10102031). Tighten using the Allen key (Part No. 100049).

Visual: Shows side rail attachment to leg assembly.

Step 8: Insert Allen Key

Insert the Allen key (Part No. 100049) into the appropriate fitting.

Visual: Close-up of Allen key insertion.

Step 9: Attach Part to Frame

Attach a part to the chair frame.

Visual: Shows a part being attached to the main chair frame.

Step 10: Prepare Seat Frame Components

Attach two cylindrical connectors/nuts (Part No. 10102031) to a part, likely for the seat frame.

Visual: Shows two cylindrical connectors being attached to a component.

Step 11: Insert Seat Rails

Insert the side rails into the main chair frame.

Visual: Shows side rails being inserted into the chair structure.

Step 12: Secure Frame Components

Use the Allen key (Part No. 100049) to secure various components. [Warning] Do not use a power drill.

Visual: Shows tightening of bolts with Allen key. Crossed-out power drill icon.

Step 13: Attach Backrest

Attach the backrest to the chair frame using screws (Part No. 10101711). Tighten with the Allen key (Part No. 100049).

Visual: Shows backrest being attached with screws and tightened.

Step 14: Secure Backrest

Push down on the backrest until it clicks into place, securing it. [Warning] Do not use a power drill.

Visual: Shows pushing the backrest down to lock it. Crossed-out power drill icon.

Step 15: Attach Seat Frame

Attach the seat frame to the chair. Use the Allen key (Part No. 100049) to tighten the bolts. [Warning] Do not use a power drill.

Visual: Shows seat frame attachment and tightening with Allen key. Crossed-out power drill icon.

Step 16: Secure Seat Frame

Secure the seat frame using screws (Part No. 106553).

Visual: Shows screws being used to secure the seat frame.

Step 17: Attach Seat Base

Attach the woven seat base to the seat frame using screws (Part No. 102930).

Visual: Shows the woven seat base being attached to the frame with screws.

Step 18: Position Seat Base

Lower the assembled seat base into the main chair frame.

Visual: Shows the seat base being lowered into the chair frame.

Step 19: Secure Seat Base

Secure the seat base to the chair frame using screws (Part No. 105298).

Visual: Shows screws being used to secure the seat base.

	SKANSNÄS Chair Assembly Instructions Detailed assembly guide for the SKANSNÄS chair by IKEA, including parts list and step-by-step instructions for building your furniture.
	SKANSNÄS Chair Assembly Instructions - IKEA Detailed step-by-step assembly guide for the IKEA SKANSNÄS chair, including all parts, tools, and visual descriptions for a smooth building process.
	SKANSNÄS Chair Assembly Instructions A comprehensive guide to assembling the IKEA SKANSNÄS chair, detailing all parts, tools, and step-by-step instructions for a smooth assembly process.
	SKANSNÄS Extendable Table Assembly Instructions \| IKEA Comprehensive assembly instructions for the IKEA SKANSNÄS extendable dining table. This guide provides a detailed overview of all parts, tools required, and step-by-step instructions for building your SKANSNÄS table.
	NISSAFORS Trolley Assembly Instructions Step-by-step assembly guide for the IKEA NISSAFORS trolley, including a detailed parts list, safety guidelines, and visual instructions for putting the furniture together.
	BUSLÄTT Chair Assembly Instructions - IKEA Comprehensive guide for assembling the IKEA BUSLÄTT chair, featuring a parts list, step-by-step instructions, and important safety tips. Includes product code AA-2548069-2.
	TONSTAD Chair Assembly Instructions - IKEA Step-by-step assembly guide for the IKEA TONSTAD chair frame, including parts list and detailed visual descriptions. Learn how to assemble your TONSTAD chair easily and correctly.
	ÅRSUNDA Chair Assembly Instructions Step-by-step guide for assembling the IKEA ÅRSUNDA chair, including a parts list and detailed textual descriptions of assembly steps.