ASUS MB16AC/MB16ACR/MB16ACM Portable USB Monitor

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.

As an Energy Star® Partner, ASUS has determined that this product meets the Energy Star® guidelines for energy efficiency. [ENERGY STAR logo]

Safety Information

• Before setting up this Portable USB Monitor, carefully read all the documentation that came with the package.
• To prevent fire or shock hazard, never expose this Portable USB Monitor to rain or moisture.
• Never try to open this Portable USB Monitor cabinet.
• Before using this Portable USB Monitor, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• Avoid dust, humidity, and temperature extremes. Do not place this Portable USB Monitor in any area where it may become wet. Place this Portable USB Monitor on a stable surface.
• Never push objects or spill liquid of any kind into the slots on this Portable USB Monitor cabinet.
• If you encounter technical problems with this Portable USB Monitor, contact a qualified service technician or your retailer.
• This Portable USB Monitor is powered by USB port which complies with LPS and SELV circuit according to IEC60950-1:2005.

Care & Cleaning

• Turn your monitor off and unplug the cable. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

[Warning]: Information to prevent injury to yourself when trying to complete a task.

[Caution]: Information to prevent damage to the components when trying to complete a task.

[Important]: Information that you MUST follow to complete a task.

[Note]: Tips and additional information to aid in completing a task.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

1. ASUS websites
   The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com
2. Optional documentation
   Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.

Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region.

Caution

We suggest to use the attached pen or any pen or stick that can fit in the hole at the corner as a simple stand for the monitor. Please reserve at least 10cm/4 inch of the pen at the back of the monitor to stabilize.

Diagram Description: A visual showing the monitor propped up using a pen inserted into a hole at the corner, with a measurement indicating at least 10cm/4 inches should extend from the back for stability.

1.1 Welcome!

Thank you for purchasing the ASUS® Portable USB Monitor! The latest ASUS Portable USB Monitor provides great portability and simplicity to your daily life, enhancing both of your viewing experience and style.

1.2 Package Contents

Check your package for the following items:

• Portable USB Monitor
• Quick Start Guide
• Warranty Card
• USB Type-C Cable
• Smart cover
• USB Type-C to A adapter
• Pen

[Note]: If any of the above items is damaged or missing, contact your retailer immediately.

[Note]: Inbox pen is not included in the warranty.

1.3 Monitor Introduction

1.3.1 Front View

The front view of the monitor shows the following components:

• 1. Pen hole: Use the attached pen to insert into the hole; the monitor can stand up directly without the smart cover.
• 2. Power button/Power LED: Press this button to turn the monitor on/off. The color definition of the power indicator is as the below table:

• 3. Menu button: Press this button to enter the OSD menu.
• 4. Blue light filter: Adjust the energy level of blue light emitted from LED backlight.
• 5. USB Type-C port: The primary connection port for power and data.

1.3.2 QuickFit Function

The QuickFit function contains two patterns: (1) Grid (2) Photo size.

1. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel. Alignment grid 1 will be rotated automatically if auto rotation is enabled.

Diagram Description: Visuals showing alignment grids for desktop layout, including 'Alignment Grid 1' and 'Alignment Grid 2'.

[Note]: Auto rotation function is only working under Windows OS by installing DisplayWidget software.

2. Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen.

Diagram Description: Visuals showing common photo aspect ratios like '4x6' and '3x5' displayed at actual size.

2.1 Monitor Standing Positions

You can stand up the monitor by several positions with the smart cover.

Diagram Description: Illustrations labeled A, B, and C show various ways to fold and position the smart cover to support the monitor in different orientations and angles.

2.2 Connect the USB Monitor with System

Method A: Connect the monitor directly to a system with a USB Type-C port using a USB Type-C cable.

Method B: For systems without a Type-C interface but with USB 3.0, use a USB Type-C to Type-A adapter with the USB Type-C cable. Ensure the correct driver is installed from the ASUS website.

[Note]: Please check the ASUS website for the latest driver and DisplayWidget software.

2.3 Announcements

This product and its attached smart cover contain magnets. Be aware of potential risks to computer hard drives and other magnet-sensitive objects.

Please ensure not to stack the product with the computer when the computer is in use (power on or standby mode). Otherwise, the hard drive could be influenced, leading to permanent data loss, or the computer display might switch off due to auto protection mechanisms. When placing this product together with a computer in a bag, ensure the computer is powered off to avoid possible hard drive damage.

Diagram Description: A sequence of images showing the monitor being placed near a laptop, with an arrow indicating potential magnetic interference affecting the laptop's hard drive.

3.1 OSD (On-Screen Display) Menu

3.1.1 How to Reconfigure

Follow these steps to navigate and change settings in the OSD menu:

1. Press the MENU button to activate the OSD menu.
2. Press the button to toggle between options in the Menu. The option name is highlighted as you move between icons.
3. To select the highlighted item, press the button.
4. Press the button to select the desired parameter.
5. Press the button to enter the slide bar and then use the button, following the on-screen indicators, to make your changes.
6. Select to return to the previous menu or to accept and return to the previous menu.

Diagram Description: A visual representation of the OSD menu interface, showing the 'Splendid' section with various modes like 'Standard Mode', 'sRGB Mode', etc., and the navigation buttons.

3.1.2 OSD Function Introduction

1. Splendid

This function contains eight sub-functions that you can select for your preference:

• Standard Mode: Best for document editing with SPLENDID™ Video Intelligence Technology.
• sRGB Mode: Best for viewing photos and graphics from PCs.
• Scenery Mode: Best for scenery photo displaying with SPLENDID™ Video Intelligence Technology.
• Theater Mode: Best for movie watching with SPLENDID™ Video Intelligence Technology.
• Game Mode: Best for game playing with SPLENDID™ Video Intelligence Technology.
• Night View Mode: Best for playing dark-scene games or watching dark-scene movies with SPLENDID™ Video Intelligence Technology.
• Reading Mode: Best for book reading.
• Darkroom Mode: Best for a weak ambient light environment.

Note on Configurability:

• In Standard Mode, Saturation, SkinTone, Sharpness, and ASCR functions are not user-configurable.
• In sRGB Mode, Saturation, Color Temp., SkinTone, Sharpness, Brightness, Contrast, and ASCR functions are not user-configurable.
• In Reading Mode, Saturation, SkinTone, Sharpness, ASCR, Contrast, and Color Temp functions are not user-configurable.

2. Blue Light Filter

Adjust the energy level of blue light emitted from LED backlight.

• Level 0: No change.
• Level 1~4: The higher the level, the more blue light will be reduced.

Notes:

• When Blue Light Filter is activated, the default settings of Standard Mode will be automatically imported.
• Between Level 1 to Level 3, the Brightness function is user-configurable.
• Level 4 is an optimized setting, compliant with TUV Low Blue Light Certification. The Brightness function is not user-configurable for Level 4.

To alleviate eye strains:

• Take short breaks (at least 5 minutes) after around 1 hour of continuous computer use. Short, frequent breaks are more effective than a single longer break.
• Periodically rest your eyes by focusing on distant objects to minimize eye strain and dryness.
• Perform eye exercises regularly: (1) Look up and down. (2) Roll your eyes slowly. (3) Move your eyes diagonally.
• High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Using the Blue light Filter to reduce harmful blue light (up to 70% max.) can help avoid CVS (Computer Vision Syndrome).

3. Color

Select the image color you like from this function.

• Brightness: Adjusting range is from 0 to 100.
• Contrast: Adjusting range is from 0 to 100.
• Saturation: Adjusting range is from 0 to 100.
• Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode.
• Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish.

[Note]: In User Mode, colors of R (Red), G (Green), and B (Blue) are user-configurable; the adjusting range is from 0 ~ 100.

4. Image

You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, and ASCR from this main function.

• Sharpness: Adjusts picture sharpness. Range is from 0 to 100.
• Trace Free: Speeds up response time via Over Drive technology. Range is from 0 (slower) to 100 (faster).
• Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, “1:1”.
• VividPixel: ASUS Exclusive Technology for lifelike visuals. Range is from 0 to 100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.

[Note]: 4:3 aspect ratio is only available when the input source is in 4:3 format.

5. System Setup

Adjusts the system configuration.

System Setup Options:

• Splendid Demo Mode: Activate the demo mode for the Splendid function.
• Auto Rotation: Enable/disable automatic image rotation. Note: Auto rotation function only works under Windows OS by installing DisplayWidget software.
• GamePlus: Provides a toolkit and creates a better gaming environment. The Crosshair function is designed for First Person Shooter (FPS) games. To activate GamePlus: Select ON to enter the GamePlus main menu.
• Press to select between Crosshair, Timer, and Display Alignment functions.
• Press to confirm your selection. Select to go off and exit.

Diagram Description: Visuals of the GamePlus main menu showing options for Crosshair, Timer, and Display Alignment. Further visuals show the Crosshair selection screen with different reticle styles and the Timer screen with countdown options.

• QuickFit: Refer to page 1-3 for details.
• ECO Mode: Activates ecology mode for power saving.
• OSD Setup: Adjusts OSD Timeout, DDC/CI, and Transparency of the OSD screen.
• Language: Select OSD language. Available languages include: English, French, German, Spanish, Italian, Dutch, Russian, Polish, Czech, Croatian, Hungarian, Romanian, Portuguese, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, and Indonesian.
• More: Navigates to the next page of System Settings.
• Key Lock: Disables all key functions. Press and hold the menu button for more than five seconds to disable key lock.
• Information: Displays the monitor information.
• Power Indicator: Turns the power LED indicator on/off.
• Power Key Lock: Disables or enables the power key.
• All Reset: Selects “Yes” to revert all settings to the factory default mode.

6. Shortcut

Selecting this option allows you to set shortcut keys.

Shortcut Options: User can select from "Blue Light Filter", "Splendid", "Brightness", "Contrast", "Auto Rotation", "Color Temp.", "QuickFit", "GamePlus" and set them as shortcut keys.

7. MyFavorite

Load/Save all settings on the monitor.

Diagram Description: Visuals of the 'MyFavorite' OSD screen showing options to Load or Save settings into 'Setting 1' through 'Setting 4'.

3.2 Specifications

[Note]: Specifications are subject to change without notice.

3.3 Troubleshooting (FAQ)

3.4 Supported Timing List

PC Supported Primary Timing

IBM Modes, Factory Preset Timing

VESA Modes, User Available Timing