ASUS MB16AMTR Portable USB Touch Monitor User Guide

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

Declaration of Conformity

This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union.

WEEE Symbol Statement

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Safety Information

• Before setting up this Portable USB Monitor, carefully read all the documentation that came with the package.
• To prevent fire or shock hazard, never expose this Portable USB Monitor to rain or moisture.
• Never try to open this Portable USB Monitor cabinet.
• Before using this Portable USB Monitor, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• Avoid dust, humidity, and temperature extremes. Do not place this Portable USB Monitor in any area where it may become wet. Place this Portable USB Monitor on a stable surface.
• Never push objects or spill liquid of any kind into the slots on this Portable USB Monitor cabinet.
• If you encounter technical problems with this Portable USB Monitor, contact a qualified service technician or your retailer.
• This Portable USB Monitor is powered by USB port which complies with LPS and SELV circuit according to IEC 62368-1.

WARNING: Restriction on Hazardous Substances statement (India) This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of Lead, Mercury, Hexavalent Chromium, polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs) in concentration exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except of exemptions listed in Schedule 2 of the Rule.

ASUS Contact Information

ASUSTeK Computer Inc.
Address: 1F, No.15, Lide Rd., Beitou Dist., Taipei City, 112
Telephone: +886-2-2894-3447
Fax: +886-2-2894-7798
E-mail: info@asus.com.tw
Website: http://www.asus.com.tw/

Technical Support (ASUSTeK)
Telephone: +86-21-38429911
Online Support: http://support.asus.com/

ASUS Computer International (America)
Address: 48720 Kato Rd, Fremont, CA 94538, USA
Telephone: +1-510-739-3777
Fax: +1-510-608-4555
Website: http://usa.asus.com/

Technical Support (America)
Telephone: +1-812-282-2787 (English Only)
Telephone: +1-905-370-2787 (French Only)
Online Support: http://support.asus.com/

ASUS Computer GmbH (Germany and Austria)
Address: Harkortstr. 21-23 D-40880 Ratingen, Germany
Telephone: +49-1805-010920
Website: http://www.asus.de/

Online Contact (Germany)
http://www.asus.de/sales

Technical Support (Germany)
Telephone: +49-1805-010923
Support Fax: +49-2102-959911
Online Support: http://support.asus.com/

Care & Cleaning

• Turn your monitor off and unplug the cable. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.
• Please use [clean water] only as the cleaning method.

Normal Monitor Symptoms

• Slightly uneven brightness may be observed depending on the desktop pattern.
• An afterimage may remain after switching images if the same image is displayed for hours. The screen will recover slowly, or you can turn off the Power Switch for hours.
• If the screen becomes black or flashes, or stops working, contact your dealer or service center. Do not attempt self-repair.

Conventions Used in This Guide

• ⚠️ WARNING: Information to prevent injury to yourself when trying to complete a task.
• ? CAUTION: Information to prevent damage to the components when trying to complete a task.
• ❗ IMPORTANT: Information that you MUST follow to complete a task.
• ℹ️ NOTE: Tips and additional information to aid in completing a task.

Instructions to Prevent Reasonably Foreseeable Misuse (Battery)

Batteries and associated components must be constructed to prevent electric shock or fire safeguard failure under foreseeable conditions. This includes extreme temperatures and low air pressure. If safety devices are not practical, instructional safeguards must be provided.

• Replacement of a BATTERY with an incorrect type that can defeat a SAFEGUARD.
• Disposal of a BATTERY into fire or a hot oven, or mechanically crushing or cutting of a BATTERY, which can result in an EXPLOSION.
• Leaving a BATTERY in an extremely high temperature surrounding environment or subjecting it to extremely low air pressure, which may result in an explosion or leakage of flammable liquid or gas.

Where to Find More Information

1. ASUS Websites: The ASUS websites worldwide provide updated information on ASUS hardware and software products. Visit http://www.asus.com.
2. Optional Documentation: Your product package may include optional documentation added by your dealer. These documents are not part of the standard package.
3. Protect your eyes with ASUS EYE CARE Monitors: The latest ASUS monitors feature exclusive Blue Light Filter and Flicker-free technologies. Learn more at https://www.asus.com/Microsite/display/eye_care_technology/.

Takeback Services

ASUS recycling and takeback programs reflect a commitment to environmental protection. ASUS provides solutions for customers to responsibly recycle products, batteries, and packaging materials.

For detailed recycling information in different regions, please visit http://csr.asus.com/english/Takeback.htm.

Product information for EU energy label.

Chapter 1: Product Introduction

1.1 Welcome!

Thank you for purchasing the ASUS Portable USB Touch Monitor! It offers great portability and productivity, enhancing your viewing and working experience.

1.2 Package Contents

Check your package for the following items:

• Portable USB Monitor
• Quick Start Guide
• Warranty Card
• USB Type-C Cable
• USB Type-C to A adapter (Optional)
• USB Type-C to A cable (Optional)
• Protective Sleeve
• Mini HDMI to HDMI cable
• PD 30W Adapter

❗ If any of the above items is damaged or missing, contact your retailer immediately.

1.3 Monitor Introduction

1.3.1 Front View and Charging Instructions

Diagram: The monitor features several ports and controls. Key elements are numbered:

• 1. Power button/Power LED: Press to turn the monitor on/off. The LED indicates status: Blue (Power on), Red (Charging), Green (Finished charging), Dark (OFF), Orange (Standby).
• 2. 5-way key: Navigates OSD menus, selects items, and adjusts values (up/down/left/right).
• 3. USB Type-C port (for charging): Supports charging up to 12V@2.5A (30W) with the included PD adapter.
• 4. USB Type-C port (data/display): Connects to sources like Notebooks/PCs/Mobile phones. Supports signal input up to 1920 x 1080 @60Hz. Type-C output (up to 10W) requires a DC power adapter.
• 5. Mini-HDMI port: Connects to devices with an HDMI port.
• 6. Earphone jack Port: Used to connect earphones.

❗ IMPORTANT: Use only the bundled power adapter and USB cable to charge your monitor. Using different accessories may cause potential damage.

❗ IMPORTANT: For best performance, use the power adapter specifically for the MB16AMTR.

⚠️ WARNING: The adapter may become warm to hot during use. Do not cover it and keep it away from your body. If the device becomes unusually hot, disconnect the USB cable and contact an ASUS qualified service personnel.

1.3.2 QuickFit Function

The QuickFit function offers two patterns:

1. Grid pattern: Helps designers and users organize content and layout for a consistent look. Alignment Grid 1 rotates automatically if auto-rotation is enabled.
2. Photo size: Allows photographers and users to accurately view and edit photos in real size on the screen. Displays common photo dimensions like 4x6 and 3x5.

Chapter 2: Setup

2.1 Adjusting the Monitor

Diagram: The monitor can be tilted. The tilt angle can be adjusted between approximately 70° and 35° relative to the surface.

2.2 Connect the USB Monitor with System

Diagram A: Connects via Mini-HDMI for video and USB (for touch function) for touch input.

Diagram B: Connects via USB Type-C for both video and touch input.

Diagram C: Connects via USB Type-C for touch input and Mini-HDMI for video. Requires driver installation.

❗ Must connect a USB cable between the monitor and the input device to enable touch signal transmission.

Chapter 3: General Instruction

3.1 OSD (On-Screen Display) Menu

3.1.1 How to Reconfigure

Diagram: Shows the OSD menu with options like Splendid, Standard Mode, sRGB Mode, etc.

Navigation:

1. Press the Central button of the 5-way key to display the OSD menu.
2. Use the Up and Down keys to navigate through menu options. The selected option name is highlighted.
3. Press the Right key or the Central button to select a highlighted item.
4. Use the Up and Down keys to select desired parameters.
5. Press the Right key or the Central button to enter a slide bar, then use Up/Down keys to make changes.
6. Press the Left key to return to the previous menu.

Icon Meanings:

• ⚡ Get power from source when this icon is shown.
• ? Battery power.
• ? ⚡ Battery is being charged.

3.1.2 OSD Function Introduction

This section details various OSD functions:

1. Splendid: Offers eight sub-functions for image preference:
   • Standard Mode: Best for document editing.
   • sRGB Mode: Best for viewing photos and graphics from PCs.
   • Scenery Mode: Best for scenery photo display.
   • Theater Mode: Best for movie watching.
   • Game Mode: Best for game playing.
   • Night View Mode: Best for dark-scene games or movies.
   • Reading Mode: Best for book reading.
   • Darkroom Mode: Best for low ambient light environments.

   Note: In Standard, sRGB, and Reading modes, certain functions like Saturation, SkinTone, Sharpness, Contrast, Color Temp, and ASCR may not be user-configurable.

2. Blue Light Filter: Adjusts blue light emission from the LED backlight to reduce eye strain. Options range from Min to Max. Maximum setting reduces blue light scattering. Compliance with TUV low blue light certification. Brightness is user-configurable at maximum level.
3. Color: Adjusts image color settings:
   • Brightness: 0 to 100.
   • Contrast: 0 to 100.
   • Saturation: 0 to 100.
   • Color Temp.: Preset modes (Cool, Normal, Warm) and User Mode.
   • Skin Tone: Reddish, Natural, Yellowish.
   • Smart View: Versatile viewing positions with Smart View Technology.

   In User Mode, R, G, B colors are user-configurable from 0 to 100.

4. Image: Adjusts image properties:
   • Sharpness: 0 to 100.
   • Trace Free: Speeds up response time (0 to 100).
   • Aspect Control: Options include "Full" and "4:3".
   • VividPixel: ASUS technology for clearer visuals (0 to 100).
   • ASCR: Enables/disables dynamic contrast ratio.

   4:3 aspect ratio is only available for 4:3 input sources.

5. Input Select: Choose between HDMI and Type-C input signals.
6. System Setup: Configures system settings:
   • Auto Rotation: Enables automatic image rotation (requires DisplayWidget Center software on Windows OS).
   • ECO Mode: Power-saving mode. Activates when battery power is below 20%, adjusting brightness to extend usage time. Designed for NB/PC only. Requires "Charging from NB/PC" selection and is only available via Type-C input.
   • Touch Screen: Supports 10-point touch technology. Use with Windows 10 OS or above. Can be enabled for single or multi-finger touch, or disabled.
   • Volume: Adjusts headphone and speaker volume.
   • Input Device Pop-up: Enable/disable pop-up questions for Input Device & Power Supply.
   • Input Device: Select "Phone" or "NB/PC". For "NB/PC", choose "Charging From NB/PC" to sustain working time. "No Charging From NB/PC" disables power supply. Note that "No Charging" means power under 100mA and does not affect host device battery life. Battery may still be consumed due to limited NB/PC power output.
   • USB-C Charging: Type-C output (up to 10W) requires a DC power adapter. Can be disabled when not in use.
   • Standby Mode: Select ON for wake-up during power saving, or OFF to power off after 15 seconds of power saving.
   • GamePlus: Provides tools for gaming, like Crosshair, Timer, and Display Alignment. To activate, press the GamePlus button, select a function, and confirm. Crosshair/Timer are movable using the 5-way key.
   • QuickFit: Refer to page 1-4 for details.
   • OSD Setup: Adjusts OSD Timeout, DDC/CI, and Transparency.
   • Language: Select OSD language from a list including English, French, German, Spanish, Italian, Dutch, Russian, Polish, Czech, Croatian, Hungarian, Romanian, Portuguese, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, Indonesian, Ukrainian, Vietnamese.
   • Key Lock: Disables all key functions. Press and hold the down button for over five seconds to disable.
   • Power Key Lock: Disable/enable the power key.
   • Information: Displays monitor information.
   • All Reset: Resets all settings to factory defaults.
7. Shortcut: Allows users to set shortcut keys for functions like Blue Light Filter, Splendid, Brightness, Contrast, Auto Rotation, Input Select, and Volume. Right key defaults to volume, Up key to input selection, Down key to brightness.
8. MyFavorite: Load/Save all settings on the monitor (e.g., Setting 1, Setting 2, etc.).

3.2 DisplayWidget Center

Download the latest DisplayWidget Center from the MB16AMTR official website under the "Support" tab, then "Driver & Utility".

Always connect your MB16AMTR to the input device FIRST before launching DisplayWidget Center.

It is recommended to create a desktop shortcut for easier activation.

Diagram: Shows the DisplayWidget Center interface with various settings like Splendid, GamePlus, System Settings, MultiScreen, Image, Color, Brightness, Contrast, etc.

3.3 Touch Panel Setting

If your input device is connected to more than one extended monitor, follow these steps for touch setting:

1. Search for "Control Panel" in the Windows search box and open it.
2. Navigate to Hardware and Sound > Tablet PC Settings > Setup.
3. Follow the on-screen instructions. Click "enter key" or touch the screen. If the setting message appears on a non-touch panel, click "enter key". When the message moves to the MB16AMTR screen, touch the MB16AMTR screen to complete the setting.

3.4 Specifications

*Specifications are subject to change without notice.

3.5 Troubleshooting (FAQ)

3.6 Supported Timing List

PC Supported Primary Timing