BaByliss Air Wand Quick Start Guide

How to Attach the Accessories

[Image Description: The BaByliss Air Wand device and two attachments: a round brush and a detangling brush.]

• With the hooks on the rear of the attachment located at the top, position the attachment over the air outlet.
• At a slight angle, with the bottom of the attachment touching the appliance, gently push the top of the attachment onto the handle until it clicks into place.
• To remove an accessory, press and hold the release button on top and gently pull the attachment away from the handle.

How to Activate Ultra-Care Mode

[Image Description: The top of the BaByliss Air Wand device with three blue LED lights indicating the Ultra-Care Mode is active, cycling between hot and cool airflow.]

To activate the Ultra-Care Mode, press and hold down the temperature setting button for 1-2 seconds until the temperature LED lights alternate between red and blue to indicate the airflow is cycling between a hot and cool airflow.

To turn off the Ultra-Care Mode function, press the temperature button once to return to your chosen heat setting.

Caution

Please be careful as the attachments and the air outlet surround will become hot after use. We suggest to run the cool setting to help cool the area and attachments before changing.

How to Activate Memory Function

[Image Description: The BaByliss Air Wand device with red LED lights indicating a set temperature, likely for the Memory Function.]

The memory feature stores your preferred temperature setting for ease of use and consistent results. The memory feature is automatically activated during use to store your preferred temperature setting.

Once the desired temperature setting has been selected, the memory function will store the selected temperature for future use. When turning the appliance on next, the appliance will automatically select the temperature stored.

How to Clean the Filter

[Image Description: The removable magnetic filter attachment being removed from the end of the BaByliss Air Wand.]

The removable magnetic inlet filter makes cleaning easy and therefore optimizes the dryer's airflow for fast drying performance. Ensure the appliance is switched off, unplugged, and cool. Using a soft brush, clean any hair and other debris from the filter.