ELVARLI Storage System Assembly Instructions
Designed and quality checked by IKEA of Sweden.
Important Information & Preparation
Review these points before beginning assembly:
- Component Handling: ❌ [Incorrect handling of parts] versus ✔️ [Correct handling of parts]. Ensure proper handling of all components.
- Assembly Support: ❓ [Uncertainty about assembly] indicates a need for guidance. Refer to IKEA for assistance. ⚙️ [Assembly process with IKEA support].
- Stability Warning: [Tall shelving unit] requires careful attention. ⚠️ [Unstable unit warning] highlights the risk of tipping if not properly secured.
Included Parts
- 4x Fastener Type 144574
- 4x Fastener Type 144575
Assembly Steps
Step 1: Install Vertical Poles
Position and install the vertical support poles. ⬆️ [Upward direction] indicates the direction for placement or assembly progression.
Step 2: Attach Shelves
Carefully attach the shelves to the vertical poles. Follow the indicated sequence [1, 2, 5] for correct placement.
Detail: Secure each shelf using four sets of fasteners (144574 and 144575).
Step 3: Continue Structure Assembly
Continue building the storage system by adding subsequent components as shown in the diagrams [Assembly progression]. Ensure each part is correctly aligned and secured.
Safety Note: ? [Ladder hazard] - Avoid using ladders if possible. Ensure the final structure is stable and properly assembled.
