Step 8: Install Batteries
Note: Use new, non-rechargeable alkaline batteries only.
Battery Installation Process
Follow these steps to install the batteries:
Remove the battery cover: Detach the battery cover from the device. The cover has an "OPEN" indicator.
Diagram Description: The image shows the battery cover removed, exposing the battery compartment. Four AA batteries are displayed separately.
Prepare batteries: Four AA batteries are ready. Ensure the positive (+) and negative (-) terminals are visible on each.
Insert batteries: Place each AA battery into its corresponding slot in the compartment. Align the positive (+) terminal of each battery with the positive contact and the negative (-) terminal with the negative contact.
Diagram Description: The diagram shows the batteries correctly inserted into the compartment, with terminals aligned.
Replace battery cover: Secure the battery compartment by placing the cover back onto the device.
Diagram Description: The diagram illustrates the final step of reattaching the battery cover.
