IKEA UTRUSTA 110° Corner Cabinet Pull-Out System
Design and Quality IKEA of Sweden
Parts List
- 6x Screw (100349)
- 8x Screw (105344)
- 2x Screw (109594)
- 4x Screw (116654)
- 4x Screw (124681)
- 2x Screw (128879)
- 26x Plastic Dowel (128530)
- 4x Plastic Bracket (128860)
- 2x Plastic Cap (128532)
- 1x Base Plate (102384)
- 2x Rotating Shelf Support (128528)
- 1x Rotating Shelf Support (128531)
Assembly Instructions
Tools Required: Phillips head screwdriver, Flat head screwdriver.
-
Step 1
Attach the mounting plates to the cabinet side panels using 4x screws (109594).
Diagram: Shows attaching a mounting plate to the inside of a cabinet door frame with screws.
-
Step 2
Attach the rotating shelf support base to the cabinet floor using 4x screws (109594) and 1x screw (105344). Ensure the base is oriented correctly as shown in the diagram.
Diagram: Shows attaching the base plate to the cabinet floor with screws. An inset shows a close-up of the base plate and screws, with a warning symbol indicating not to use the wrong screw type.
-
Step 3
Insert 2x plastic dowels (128530) into the rotating shelf support (128528). Repeat for the second support.
Diagram: Shows inserting dowels into the rotating shelf supports.
-
Step 4
Attach the rotating shelf supports (128528) to the central column using 2x screws (128532).
Diagram: Shows attaching the rotating shelf supports to the central column with screws.
-
Step 5
Attach the damping mechanism to the cabinet door using the provided bracket and screw.
Diagram: Shows attaching a damping mechanism to the inside of a cabinet door.
-
Step 6
Attach the central column assembly to the mounting plate on the cabinet side panel using 1x screw (109594).
Diagram: Shows attaching the central column to the mounting plate with a screw.
-
Step 7
Attach the central column assembly to the base plate on the cabinet floor using 1x screw (109594) and 1x screw (105344).
Diagram: Shows attaching the central column to the base plate with screws.
-
Step 8
Assemble the rotating shelves. Attach the shelf supports to the shelves using 2x screws (128879) and 2x plastic brackets (128860). Repeat for the second shelf.
Diagram: Shows assembling the rotating shelves with supports and brackets.
-
Step 9
Attach the plastic brackets (128860) to the rotating shelves using 2x screws (128879).
Diagram: Shows attaching plastic brackets to the rotating shelves with screws.
-
Step 10
Insert 13x plastic dowels (128530) into the rotating shelves.
Diagram: Shows inserting dowels into the rotating shelves. A warning symbol indicates not to use the wrong tool.
-
Step 11
Slide the assembled rotating shelves onto the central column. Ensure they are oriented correctly.
Diagram: Shows sliding the assembled shelves onto the central column.
-
Step 12
Secure the rotating shelves to the central column using 13x plastic dowels (102384).
Diagram: Shows securing the shelves to the column with dowels.
-
Step 13
Attach the shelf stoppers to the rotating shelves using 1x base plate (102384).
Diagram: Shows attaching shelf stoppers to the rotating shelves.
-
Step 14
Connect the damping mechanism to the central column.
Diagram: Shows connecting the damping mechanism to the central column.
-
Step 15
Insert the assembled pull-out system into the cabinet.
Diagram: Shows inserting the completed pull-out system into the cabinet.
-
Step 16
Place the 2x shelf covers onto the rotating shelves.
Diagram: Shows placing shelf covers onto the rotating shelves.
Usage Information
Each shelf has a maximum load capacity of 15kg (33 lb).
Diagram: Shows two shelves with weight indicators of 15kg (33 lb) each.
