Instruction Manual

2-in-1 Mechanic Creeper and Workshop Seat

Models: 61191, 61192

Illustration of the 2-in-1 Mechanic Creeper and Workshop Seat. The creeper is shown in its flat, extended form with wheels. The seat configuration is implied. Text states: 'Illustration similar, may vary depending on model'.

Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.

Introduction

Thank you for choosing this quality product. To minimise the risk of injury, please take some basic safety precautions when using this product. Read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.

Safety Instructions

Warning!

Before assembling and commissioning, carefully read the instructions. Disobeying the safety instructions and assembly instructions can cause material damages and/or personal injuries.

The maximum capacity of 150 kg must not be exceeded.
Do not stand on the mechanic creeper.
The mechanic creeper is designed for use on solid and flat surfaces that are able to bear the load. Using the product on a surface other than a solid and flat one can cause load instability and a loss of bearing capacity. This might lead to material damages or personal injuries.
Do not modify the product in any way.
If the mechanic creeper does not work properly, if parts are loose, damaged, or missing, it must not be used any further.
The fabric cover of the mechanic creeper is flammable. Be extremely careful with cigarettes lit or open flames being in the vicinity of the creeper.

Assembly Instructions

Connect the three parts of the foam-cushioned mechanic creeper with the four M8×55 hexagon screws and M8 lock nuts. Tighten the M8 hexagon screws and nuts. Fix the six guide rolls to the frame of the mechanic creeper assembled.

Diagram illustrating the assembly of the mechanic creeper. It shows the main frame components, wheels, and fasteners. Numbers correspond to the parts list. A close-up shows wheel attachment.

No	Name	No	Name
1	Nuts (4)	6	Middle frame
2	Washers (4)	7	Headrest frame
3	Rolls (4)	8	Rolls (2)
4	Rear frame	9	Washers (2)
5	Lock pin	10	Cushioned headrest

Converting the Mechanic Creeper to a Workshop Seat

Pull out the lock pin (5) until unlocking the lock mechanism (lock hole).
Tilt the middle part of the mechanic creeper towards the end until the lock pin can snap into the locking bar of the workshop seat.
Fold the front part of the mechanic creeper, the headrest frame (7), to the opposite until it is horizontal.
Invert the above steps to convert the workshop seat to a mechanic creeper.

Diagram illustrating the conversion of the mechanic creeper to a workshop seat. One view shows the creeper with a lock pin and lock hole indicated. Arrows suggest tilting and folding to transform it into the seat configuration. The seat form is also depicted.

No	Name	No	Name
1	Lock hole	3	Lock
2	Lock pin

Important Note

Reproduction and any commercial use (of parts) of this operating manual requires written permission from WilTec Wildanger Technik GmbH.

Contact Information

[info] The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.

If you have found an error or wish to suggest an improvement, please send an e-mail to: service@wiltec.info or use the contact form: https://www.wiltec.de/contacts/

The most recent version of this manual in several languages can be found in the online shop: https://www.wiltec.de/docsearch

Postal Address:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany

For returns (exchange, repair):
Attention! To allow for a trouble-free complaint or return, it is important to contact the customer service team before returning goods.

Returns Department:
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany

Contact Details:
E-mail: service@wiltec.info
Phone: +49 2403 55592-0
Fax: +49 2403 55592-15

Website: https://www.XPOtool.com

	XPOtool 65020 Wall-Mounted Workbench Assembly Instructions Step-by-step assembly guide for the XPOtool 65020 wall-mounted workbench, including component lists and assembly procedures.
	XPOtool 65020 Wall-Mounted Workbench Assembly Instructions Comprehensive assembly guide for the XPOtool 65020 wall-mounted workbench, detailing component identification and step-by-step assembly procedures.
	XPOtool Camping Cooker 62013 Operation Manual \| Safety & Assembly Guide Comprehensive operation manual for the XPOtool Camping Cooker model 62013. Includes technical specifications, assembly instructions, safety precautions, and contact information from WilTec Wildanger Technik GmbH.
	XPOtool 61305-61307 Garden Tipping Cart Assembly Instructions Detailed assembly instructions for the XPOtool 61305-61307 Garden Tipping Cart. Includes parts list, screwing parts, and textual descriptions of diagrams for assembly.
	XPOtool Chainsaw Sharpening Kit 63026 Operation Manual Official operation manual for the XPOtool Chainsaw Sharpening Kit (Model 63026). Includes safety instructions, operating procedures, and maintenance tips for effective chainsaw chain sharpening.
	XPOtool Pressure Switch 61589 Instruction Manual Instruction manual for the XPOtool Pressure Switch (model 61589), covering safety instructions, intended use, technical data, operation, and waste disposal regulations.
	XPOtool 65020 Wall-Mounted Folding Workbench Assembly Instructions Detailed assembly instructions for the XPOtool 65020 wall-mounted folding workbench. Includes component identification, step-by-step assembly guidance, and important safety notes.
	XPOtool Spreader GT1507 Instruction Manual This comprehensive instruction manual provides detailed guidance for the XPOtool Spreader GT1507. It covers essential safety precautions, step-by-step assembly instructions, a complete parts list, and adjustment procedures for optimal operation and maintenance of your garden spreader.