Operation Manual: Camping Cooker 62013

Introduction

Thank you for purchasing this quality product. To minimise the risk of injury, we urge that our clients take some basic safety precautions when using this device. Please read the operation instructions carefully and make sure you have understood its content. Keep these operation instructions safe.

Illustration similar, may vary depending on model.

A visual representation of the XPOtool Camping Cooker shows a robust, portable stove designed for outdoor use. It features a central burner assembly mounted on a sturdy frame with four legs for stability. A gas hose connection is visible, leading to the burner unit.

Technical Specifications

Assembly

1. Lock the burner in place by placing it on the support fixture and screw it to the frame with help of the screws and nuts included in the scope of delivery.
2. Install the 4 legs by screwing them to the frame with 4 screws each.
3. Attach the gas valve to the burner.
4. Attach the gas hose to the valve and make sure that it is properly connected.

Attention: Make sure to read this instruction manual before installing or using this camping cooker. This device can only be utilised with the liquefied gases of butane or propane – gas pressure 28–30 mbar.

Important: This camping cooker can only be used outside. It has thereby to be placed on a non-flammable surface to minimise the risk of accidents. Not suitable for children! ?

Parts Diagram Description:

The camping cooker consists of the following numbered parts:

• 1 Frame: The main structural base of the cooker.
• 2 Burner: The component where the gas is ignited and combustion occurs.
• 3 Gas valve: Controls the flow of gas to the burner.
• 4 Leg: Supports the cooker, ensuring stability. There are four legs.
• 5 Support: A fixture that holds the burner in place on the frame.

Important Notices & Contact Information

Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.

ℹ️ Disclaimer: The information contained in this document may alter at any time without previous notice. It is prohibited to copy or spread any parts of this document in any way without prior written allowance. All rights reserved. WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown. Even though, WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided. If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing from you.

Contact WilTec Wildanger Technik GmbH:

• Send an e-mail to: service@wiltec.info
• Use our contact form: https://www.wiltec.de/contacts/
• Find the most recent version of this manual in various languages: https://www.wiltec.de/docsearch

Postal Address:

For returns (exchange, repair, or other purposes): Please use the following address. Attention! To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.

Customer Service Contact:

• E-mail: service@wiltec.info
• Tel: +49 2403 55592-0
• Fax: +49 2403 55592-15

Website: https://www.XPOtool.com