UMIDIGI BISON & BISON GT User Manual

Basic Information

Individual parameters, image descriptions, and the appearance of the device in this manual may vary depending on individual versions and software updates. Printing errors are reserved.

Please update your device as soon as a new software version becomes available!

The purchaser is obliged to ensure that the serial number is stated in the warranty card, delivery note, and proof of purchase. If the serial number is not indicated on these documents, the service center may automatically reject the claim. The buyer must inform subsequent owners of this requirement. Please claim warranty service from your dealer. The warranty card and user manual are included in the phone's package.

Safe Use

The UMIDIGI BISON and BISON GT offer increased durability but are not mechanically indestructible.

The display is made of tempered glass for enhanced scratch resistance. However, it may crack if dropped on a hard surface or sharp object. Cracked displays due to mechanical damage or improper use are not covered by the warranty.

The BISON and BISON GT are certified with IP68 and IP69K ratings according to ISO 20653:2013.

Note: The IP68 rating does not guarantee 100% waterproofness in all conditions. According to the manufacturer, it offers protection up to 1.5 meters depth for 30 minutes. This rating does not apply to salt water.

After contact with water or other liquids, do not charge the phone. First, dry the connector with a moderately warm air stream (up to 40°C).

The warranty does not cover intentional damage to the phone.

Warning: The microphone is located on the bottom of the phone. If it is covered (e.g., by hand), the other party may not hear you or may hear you very poorly.

SIM Card Installation

Turn off the phone before installing SIM cards.

1. Carefully pull out the SIM card drawer from the side of the phone using the SIM card eject clip included in the package.
2. Insert the Nano SIM cards into the drawer so they click into place, then slide the drawer back into the phone.
3. Ensure the covers are closed properly.
4. The phone supports either 2x Nano SIM cards or 1x Nano SIM card and 1x microSD card.

Battery Charging

Before first use, charge the battery to 100%.

1. Connect the adapter to the charger connector. The USB-C connector can be inserted from either side; do not use force.
2. Plug the charger into an electrical outlet.
3. Once the battery is fully charged, disconnect the phone from the charger.

Powering On/Off/Sleep Mode

Ensure the phone has a SIM card and the battery is fully charged.

• To turn on the phone, press and hold the Power button (located on the right side).
• To turn off the phone, press and hold the Power button, then select "Off".
• To put the phone into sleep mode, briefly press the Power button.

Safety Notifications

• Do not use the phone while driving.
• Do not use the phone at petrol stations.
• Hold the phone at least 15 mm away from your ear and body.
• The phone may produce bright or flashing light. ⚠️
• Small parts of the phone may cause suffocation.
• Do not expose the phone to open flames. ?
• The phone may produce loud sounds.
• The phone is not resistant to metal filings.
• Do not expose the phone to magnetic radiation.
• Do not take the phone near medical equipment.
• Turn off the phone in hospitals and other medical facilities when requested.
• Keep your phone dry. ?
• Turn off your phone at airports and on airplanes when requested.
• Do not disassemble your phone. ?️
• Turn off the phone when near explosive materials and chemicals.
• Use your phone only with approved equipment.
• Do not rely solely on your phone during emergencies.

The phone/PCB may contain a moisture detection label. If moisture enters the phone, this label will turn red. The importer reserves the right to deny warranty for phones damaged in this manner.

Damage Requiring Professional Repair

If any of the following occur, contact an authorized service center or your supplier:

• Moisture has entered the phone.
• The phone is mechanically damaged.
• The phone is overheating.

Disposal Information (WEEE)

For households: The symbol ?️ on the product or documentation indicates that electrical or electronic products must not be disposed of with municipal waste. Return them to designated collection points for free recycling. Proper disposal helps conserve natural resources and prevent negative environmental and health impacts. Contact your local authority or collection point for details. Improper disposal may result in fines.

For business and company use: Consult your dealer or supplier for detailed disposal information.

Outside the European Union: The ?️ symbol is valid only within the EU. For proper disposal, consult your local authorities or equipment dealer.

Warranty and Technical Support

Warranty repairs should be claimed from your dealer. For technical problems or questions, contact your dealer. Follow electrical equipment safety rules. Do not disassemble or replace components. Tampering with the phone voids the warranty and poses an electric shock risk.

Declaration of Conformity

ASPRA Inc. declares that the UMIDIGI BISON / BISON GT radio equipment complies with Directive 2014/53/EU. The full EU Declaration of Conformity is available at: www.umidigi.tech

The warranty period for products is 24 months, unless otherwise stated.

Country Usage

This equipment can be used in the following countries:

AT BE CY CZ DK EE FI MT NL PL PT SK SI ES DE GR HU IE IT LV LT GB IS LI NO CH BG HR RU RO FR SE LU TR

Usage Restrictions

WiFi Usage Restrictions:

• Italy: WiFi network usage conditions are described in the Electronic Communications Code.
• Norway: The 2.4 GHz band restriction applies only to the area within 20 km of Ny-Ålesund.

RoHS Compliance

This device complies with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment regulations and Directive (EC) 2011/65/EU. The RoHS declaration can be downloaded from www.umidigi.tech.

Radio Equipment Operation

CZ: This radio equipment can be operated in the Czech Republic under general authorization VO-R/1/05.2017-2 and VO-R/12/09.2010-12.

SK: This radio equipment can be operated under general authorisations VPR - 07/2014, VPR - 02/2017, and VPR - 35/2012.

Technical Specifications

Maximum EIRP: Max. 2 W

Frequency Range:

Trademarks

Google, Android, and Google Chrome are trademarks of Google LLC.

Manufacturer & Distributor

Manufacturer:

Shenzhen Youmi Intelligent Technology Co.,Ltd
406-407 Jinqi Zhigu Building, 4/F, Tangling Road,
Nanshan District, Shenzhen City, China

Distributor to EU:

ASPRA a.s., Kalvodova 105/5,
602 00 Brno - Pisárky, CZ

Copyright © 2021 ASPRA a.s. All rights reserved.