Techage Smart WiFi Battery Camera
Quick User Guide
100% Wire-Free Battery Camera: No cords, No wires, No Worries.
Introduction
Thank you for purchasing the Techage Smart Wireless Camera. If you have any questions during use, please contact support.jp@techage.com. This user guide is subject to change without notice.
Product Overview
A diagram shows the camera and its accessories. The camera features are labeled: IR Light, Lens, Microphone, PIR Sensor, Speaker. The accessories include a magnetic mount and hanger. The back of the camera shows: TF Card Slot, Reset Button, Power Button, DC5V USB Port.
Button Functions
| No. | Button Function | Operation |
| 1 | Power Button | Press and hold for 5 seconds to turn the camera on/off. |
| 2 | Power Button | Press for 1 second to wake from standby mode. |
| 3 | Reset Button | Press and hold for 5 seconds to reset and restart. |
| 4 | Reset Button | Press for 1 second to enter AP distribution mode. |
LED Status
| No. | LED Status | Operation |
| 1 | Red lamp flashes slowly | Waiting for WiFi connection. Start adding the device. |
| 2 | Amber lamp flashes rapidly | WiFi connection. |
| 3 | Amber lamp flashes | Network is abnormal. |
| 4 | Amber lamp flashes slowly | WiFi connected, camera is operating normally. |
| 5 | Blue lamp flashes slowly | AP Mode. |
Smartphone App Download
Download the "CloudEdge" app by searching on Google Play for Android or the App Store for iOS.
Note: When setting up the app for the first time, please grant the following two permissions (in your phone's settings):
- To add the IP Camera, allow CloudEdge access to mobile data and wireless LAN.
- To receive alarm push notifications from your smartphone when motion or sound is detected, allow CloudEdge to receive push messages.
App interface screenshots show permission settings for storage, mobile data, app permissions, and floating windows.
Account Registration and Feedback
Account Registration
New users should register via email, click "Register", and follow the steps to complete account registration and login.
Product Support
For product issues or questions, access the feedback page in the CloudEdge APP. Provide details and optionally attach your email address.
[Headset icon] Help & Feedback
Powering On the Camera
Press and hold the power button for 5 seconds to turn on the camera. If it doesn't power on, charge it for 15 minutes first and then connect a DC5V 1A / 2A power adapter.
When the indicator light flashes slowly, the camera is starting up normally.
Note: The DC5V 1A / 2A power adapter is not included in the package.
Image of the camera's power button and USB port.
Adding Camera to App
Bring the camera and your smartphone within 30-100 cm of the router and connect to Wi-Fi.
Note: The camera only operates with 2.4G Wi-Fi and does not support 5G Wi-Fi.
Open the CloudEdge App, tap the '+' icon, and select "Battery Camera".
Follow the prompts to confirm the camera is active (indicator light turns red and flashes slowly).
Select your 2.4GHz WiFi SSID, enter the password, and tap "Next".
Align the QR code with the camera lens at a distance of approximately 15 cm (5.9 inches) until the QR code is recognized. When you hear the "Bugu" sound, tap "OK".
After hearing the sound and tapping "OK", the camera will start Wi-Fi connection. Upon completion, the app will navigate to the "Searching for Devices" page. You can then edit the camera name, tap "Done" to switch to your device list, and view the real-time video.
Device Menu
App interface screenshots show the device menu within the CloudEdge app.
- 1. Click the top-left corner of the video to add camera: Enter settings.
- 2. Device: Device List.
- 3. Account.
- 4. Me: Set up your profile.
- 5. Message: Alarm messages.
- 6. Detection Sensor: Human detection option, enabled by default.
- 7. Screenshot: Saved to your phone's photo album.
- 8. Microphone: Press to talk through the camera.
PIR Detection Distance Adjustment
Download the "CloudEdge" app from Google Play (Android) or the App Store (iOS).
App interface screenshots show the app interface for adjusting PIR sensitivity.
PIR Sensitivity Table
| Sensitivity | Detection Range (for motion/living beings) |
| Low | Up to 4m |
| Medium | Up to 6m |
| High | Up to 8m |
Note: Higher sensitivity increases detection distance but may lead to more false alarms. For outdoor camera placement, it is recommended to set the sensitivity level to "Low" or "Medium".
Alarm Notification and Playback
The PIR sensor triggers alarm push notifications. When the PIR sensor detects human motion, the app will send an alarm message. Videos are recorded to a Micro SD card, allowing you to play them back anytime, anywhere via the CloudEdge App.
When the PIR sensor detects human motion:
- Enable notifications for the CloudEdge app in your phone's settings and adjust the phone's volume.
- Allow push notifications for alert messages in your phone's settings for the CloudEdge app.
- Photos and videos are recorded to the Micro SD card (insert the Micro SD card).
Battery
The camera has a built-in 6000 mAh 18650 battery. Theoretically, it can be used for 60-90 days with 15 activations per day and 10 minutes of video playback daily.
Note: Battery life varies depending on camera usage. More frequent operation consumes battery faster.
If the battery level drops below 20%, the app will send an alarm message indicating that charging is required.
You can charge the camera with a DC 5V / 1A power adapter, remove the two built-in 18650 batteries for separate charging, or replace them with new batteries.
Note: It is recommended to use compatible batteries for replacement.
If battery consumption is too fast, it may be due to frequent camera activations. It is recommended to lower the "Detection Alarm" sensitivity or turn it off periodically.
Camera Placement and False Alarm Reduction
To reduce false alarms, please consider the following:
- Avoid placing the camera in direct sunlight or areas with bright lighting.
- Do not place the camera in locations where vehicles frequently move. Test results show the optimal distance between the camera and a vehicle is 15 meters.
- Keep the camera away from power outlets, air conditioning vents, humidifier outlets, and projector heat vents.
- Do not point the camera at a mirror.
- To avoid wireless interference from Wi-Fi routers and phones, maintain a distance of at least 1 meter from any wireless devices.
When installing the camera, it is recommended to position the PIR sensor perpendicular to the direction of motion. If the sensor is not perpendicular, motion may not be detected. It is recommended to have an angle of 10 degrees or more between the PIR sensor and the detected object.
Diagram illustrating PIR sensor placement: Recommended setup shows the PIR sensor positioned to detect motion across a path, not directly at the object's path. The angle is indicated as >10°. The optimal viewing distance is 2-10m.
Troubleshooting
| No. | Problem | Solution |
| 1 | Cannot connect | 1) Check WiFi name and password. 2) Ensure WiFi is 2.4G, not 5G. 3) Ensure the camera and phone are close to the router. |
| 2 | Reset | 1) Press and hold the reset button for 5 seconds. 2) Wait for the "bugu" sound. 3) The red light will change to slow flashing. |
| 3 | Change to new network | 1) Press the reset button to reset to factory default settings. 2) Reconnect. |
| 4 | No alarm image / People moving too fast | 1) The camera takes time to boot up, and people move too quickly. 2) Some objects around 36°C are moving in the image. |
| 5 | No alarm received | Enable notifications in the CloudEdge app. |
| 6 | Alarm video not recorded | Insert the TF card. |
| 7 | Offline device | Check if the network is good. |
| 8 | Video playback is delayed | Check the WiFi network. Ensure the distance between the camera and router is not too far. |
| 9 | Battery life is short | The camera has been activated many times. Do not place it by the roadside or expose it to sunlight. |
| 10 | Camera cannot be activated after battery replacement | 1) Check the positive and negative terminals of the battery. 2) Check if the battery is normal. |
