KOLBJÖRN Cabinet Assembly Instructions
Important Safety Information
⚠️ WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over this furniture must be used with the wall attachment device(s) provided. Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
General Assembly Guidance
Required tools: Screwdriver (Phillips head), Spirit level.
Ensure correct panel orientation during assembly.
Follow instructions carefully. Refer to IKEA for assistance if needed.
⚠️ Warning: Furniture tip-over hazard. Always secure furniture to the wall using the provided anti-tip hardware.
Parts List
- 10005757: Bolt - 4x
- 10005716: Screw - 16x
- 130864: Dowel - 2x
- 144262: Screw - 4x
- 142661: Plastic Cap - 4x
- 10005690: Plastic Cap - 4x
- 10038924: Bracket - 2x
- 10085847: Bracket - 1x
- 10004350: Allen Key - 4x
- 10005835: Bracket - 4x
- 114664: Drawer Slide - 2x
- 123437: Allen Key - 1x
Assembly Steps
Step 1
Attach brackets (10005835, 4x) to side panels using bolts (10005757, 4x) and plastic caps (10005690, 4x).
Step 2
Attach drawer slides (114664, 2x) to the side panels.
Step 3
Attach the back panel to the side panels.
Step 4
Attach the second side panel to the assembled structure.
Step 5
Attach the top panel using screws (10005716, 6x) and dowels (100092, 1x).
Step 6
Assemble the base frame.
Step 7
Attach the base frame to the main cabinet structure using screws (10005716, 2x) and dowels (100092, 1x).
Step 8
Insert shelf supports (144262, 3x) into the side panels.
Step 9
Attach the back panel guides.
Step 10
Secure the top back panel using screws (10005716, 8x).
Step 11
Attach the top cover.
Step 12
Attach the bottom cover using screws (10005716, 8x).
Step 13
Attach the legs using bolts (10005716, 8x) and the Allen key (100092).
Step 14
Attach plastic caps (142661, 4x) to the bottom of the legs.
Step 15
Attach hinges to the cabinet doors.
Step 16
Attach the cabinet doors to the main cabinet structure.
Step 17
Adjust hinges using screws (10005716, 2x) and brackets (10046377, 10095771).
Step 18
Attach door handles (130864, 2x) using screws (10004350, 2x).
Step 19
Attach door catches (10005835, 4x).
Step 20
Insert the shelves into the cabinet.
Step 21
Adjust the leveling feet at the bottom of the cabinet. Text description: "Adjust leveling feet (x mm) to ensure the cabinet is stable. Use provided shims (6mm, 12mm, 18mm) if needed."
Step 22
Attach the back panel to the cabinet.
Step 23
Shows how to stack two cabinets or attach a cabinet to a shelving unit using brackets (10085847, 4x).
Step 24
Shows how to secure stacked cabinets or a cabinet to a shelving unit using bolts (10005757, 4x).