Kingston VTAM5432L22D 54-Inch Acrylic Alcove Tub
Model: VTAM5432L22D
Product Description
This document provides detailed specifications for the Kingston VTAM5432L22D, a 54-inch acrylic anti-skid alcove bathtub featuring a left-hand drain hole.
Installation Hardware
- M10 x 60 (2 pieces)
- M10 x 45 (2 pieces)
Dimensions and Features
Drain Hole Size (Scale 3:1)
The drain hole area includes the following dimensions:
- Diameter of main drain opening: Ø2" (50mm)
- Other indicated hole sizes: Ø3-9/16" (90mm), 1/4" (6mm), Ø2-3/8" (60mm)
- Vertical measurement from tub edge to drain center: 11/16" (17mm)
Overall Tub Dimensions (Top View)
The top view diagram indicates the following primary dimensions:
- Overall Length: 53-15/16" (1370mm)
- Overall Width: 32" (813mm)
- Inner Length (water surface): 46-1/2" (1181mm)
- Inner Width (water surface): 35-7/16" (900mm)
- Drain Hole Position: Located 11-7/16" (290mm) from one side edge and 42-1/2" (1080mm) from the opposite side edge along the width. The drain opening itself is Ø2" (50mm).
- Various edge and wall dimensions are also noted:
- 3-7/16" (88mm) from ends
- 16-1/8" (410mm) from sides
- 19-15/16" (506mm) from sides
- 15-7/8" (403mm) from sides
- 18-1/2" (470mm) from sides
- 24-13/16" (630mm) from sides
- 2" (50mm) vertical spacing indicators
- 1/4" (7mm) edge dimension
Tub Profile Dimensions (Side/End Views)
The side and end views provide further details:
- Tub Height: 13-3/4" (350mm)
- Rim/Edge dimensions: 4-1/8" (105mm), Ø2-3/8" (60mm)
- Bottom width measurements: 21-7/16" (545mm), 17-15/16" (455mm), 16-15/16" (430mm)
- Internal angles at the bottom: 92° and 122°
- Edge thickness: 1" (25mm), 1/4" (7mm)
- Vertical measurements from the rim to points on the tub wall: 16-1/8" (410mm), 17-1/8" (435mm)
Ordering Information
To order parts, please call: 1-877-252-7277
Visit our website: www.kingstonbrass.com
