[JLab Audio Logo]
JLab Studio Wireless Headphones
We love that you are rocking JLab Audio! We take pride in our products and fully stand behind them.
Warranty & Support
[Two Year Warranty Seal]
[U.S. Based Customer Support Seal]
Your Warranty
All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
Contact Us
Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact
- Product updates
- How-to tips
- FAQs & more
First Time Setup: Bluetooth Pairing
Turn on the Bluetooth in your device settings.
(Visual: Phone screen showing Bluetooth toggle enabled.)
When the Studio Wireless Headphones are powered off, press and hold the Power Button for approximately 8 seconds.
(Visual: Headphones with power button highlighted. Indicator: Fast blinking red and blue light indicates searching for Bluetooth device.)
Select "JLab Studio" in your device settings to connect.
(Visual: Phone screen showing 'JLab Studio' selected in Bluetooth list.)
When the headphones are paired, voice prompts "You are connected" and blue light will flash slowly.
Pairing New / Additional Devices
Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device. Repeat FIRST TIME SETUP process for new devices.
Notes:
- Bluetooth is a wireless radio technology, sensitive to objects between the headphone and the connected device.
- The headphone is designed for use within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
- Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
- Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
- If Bluetooth connection is lost, manually reconnect your Bluetooth device.
Button Functions
- Volume Up: Click once
- Track Forward: Click & hold 2+ seconds
- Volume Down: Click once
- Track Backward: Click & hold 2+ seconds
- Power On / Off: Click & hold 2+ seconds
- Play / Pause / Answer / Hang Up Calls: Click once
- Reject Incoming Call: Click & hold 1 second
- Activate Siri (iOS) or "OK Google" (Android): Click twice
- Bluetooth Pairing: See FIRST TIME SETUP
Equalizer (EQ) Settings
Change EQ: Press both buttons simultaneously (Studio will cycle 3 EQ settings)
- JLab Signature (One Beep): JLab C3™ signature sound with amplified vocals and bass
- Balanced (Two Beeps): Even sound with no additional sound enhancements
- Bass Boost (Three Beeps): Amplified bass and sub-bass
Charging
Note: For optimum performance, charge overnight with Micro USB cable prior to using. Allow about 3 hours to fully charge.
Connect the Micro USB (included) to the headphone and connect the USB into a computer or AC adaptor (not included). Make sure the USB connection has a power output source.
Solid red light indicates the headphone is charging.
Solid blue light indicates charging is complete.
Note: Studio Bluetooth can still be used while charging. Power on and connect to device after charging occurs.
(Visual: Micro USB cable connecting to headphones. Indicator: "CHARGING" (red light), "FULLY CHARGED" (blue light).)
Cautions
- Avoid getting moisture or liquids on the headphone cups.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
- Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- Treat your headphones as you would a nice pair of sunglasses and keep them in a safe location when not in use.
