WALI Monitor Stand ECS002 Installation Manual
Model: ECS002
Brand: WALI
Important Safety Warnings
General Safety: Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty.
- Ensure the mounting surface is strong enough to support the product and equipment.
- DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY.
- Always use an assistant or a mechanical lifting device to safely lift and position heavy products.
- Tighten screws firmly, but do not over tighten. Over tightening can cause product damage that greatly reduces the holding power.
- Keep a clear area and distance from moving parts when using the product.
- Use only as intended. Never stand, hang or climb on the product.
- This product is intended for indoor use only.
- Any attempts to reconstruct the construction aren't allowed.
- This product may contain small items that could be a choking hazard if swallowed. Keep children away unless the product is intended for their use and all instructions and manuals are fully reviewed and understood by them.
- Check that the product is secure and safe to use at regular intervals (at least every three months).
Should you ever have any questions or feel you require help please contact your place of purchase for assistance.
Product Components
Illustration showing the components of the WALI Monitor Stand (Model ECS002), including the pole (A), base (B), VESA plate (C), screws (D, E, M-A, M-B, M-C), and Allen wrench (F).
| Part | Description | Quantity |
|---|---|---|
| A | Pole | x1 |
| B | Base | x1 |
| C | VESA Plate | x1 |
| D | M6x16 Screw | x2 |
| E | M6x30 Screw | x1 |
| F | 4mm Allen Wrench | x1 |
| M-A | M4x12 Screw | x4 |
| M-B | M5x12 Screw | x4 |
| M-C | VESA Mounting Screw (size implied by context) | x4 |
Assembly Instructions
Detailed diagrams illustrating each part of the monitor stand assembly and the step-by-step process.
Step 1: Attach Pole to Base
Illustration showing the pole (A) being attached to the base (B) using hardware M-A and M-B.
Step 2: Attach VESA Plate to Arm
Illustration showing the VESA plate (C) being attached to the monitor arm using screws M-A and M-B.
Step 3: Attach Monitor to VESA Plate
Illustration showing the monitor being attached to the VESA plate (C) using screws D (M6x16) and M-C. The diagram indicates the orientation for attaching the monitor.
Step 4: Attach Arm Assembly to Pole
Illustration showing the assembled arm and VESA plate being attached to the pole (A) using hardware M-C.
Note: If the monitor does not stop at your desired position, tighten the screws clockwise/counterclockwise to balance the weight. ⬆️
Support
For questions or assistance, please contact support@walielectric.com.
