Eureka! Timberline SQ Outfitter 6 Tent Assembly Instructions
Model: 2629220
Assembly Steps
-
Step 1: Identify Components
Identify all tent components. Refer to the Tent Contents list below for details.
[Diagram: Various tent parts laid out, including poles, tent body, fly, stakes, and guylines.]
-
Step 2: Prepare Tent Body
Spread out the tent body flat on the ground. Locate the four corners and the shockcord loop at the peak of the tent.
[Diagram: Tent body spread flat, highlighting the four corners and the central peak area with a shockcord loop.]
-
Step 3: Assemble Poles
Assemble the four leg poles and the ridge pole. These poles typically connect using internal shockcords and/or hub systems.
[Diagram: Shows the individual pole sections being connected to form the complete leg poles and the ridge pole assembly.]
-
Step 4: Insert Poles into Hubs
Verify the correct orientation of the pole hubs. Insert the leg poles into the corresponding sockets or hubs located at the peak of the tent body.
[Diagram: Close-up view of a pole tip being inserted into a tent hub, emphasizing the correct alignment.]
-
Step 5: Secure Peak Shockcord
Hook the peak shockcord around the assembled peak hubs to secure them in place, as illustrated.
[Diagram: Shows the shockcord loop being attached and tensioned around the pole hub at the tent's apex.]
-
Step 6: Insert Spreader Pole
Insert the spreader pole into the designated webbing pockets located on the tent roof.
[Diagram: Illustrates the spreader pole being slid into a fabric sleeve or pocket on the interior of the tent's ceiling.]
-
Step 7: Stake Tent Corners
Insert the tips of the leg poles into the webbing grommets located at the four corners of the tent body.
[Diagram: Close-up showing the end of a tent pole being secured into a grommet at the base of the tent.]
-
Step 8: Attach Clips and Stake Down
Attach all the tent clips (usually found on the tent body fabric) to the corresponding poles. Stake down the four corners of the tent body using the provided plastic stakes.
[Diagram: Shows tent clips being fastened onto poles and stakes being driven into the ground at the tent's corners.]
-
Step 9: Drape and Secure Fly
Place the rainfly over the tent body. Insert the spreader pole (from Step 6) into the webbing pockets located on the underside of the fly.
[Diagram: The rainfly is shown being draped over the erected tent structure, with the spreader pole being fitted into its pocket on the fly.]
-
Step 10: Insert Eave Poles
Insert the eave pole extensions into the webbing pockets located on the underside of the fly, typically along the edges.
[Diagram: Shows smaller, flexible poles being inserted into pockets along the edges of the rainfly.]
-
Step 11: Secure Fly Fasteners
Connect the hook-and-loop fasteners found on the underside of the fly around the leg poles. Additionally, attach the four toggles on the underside of the fly to the corresponding tent body rings.
[Diagram: Illustrates Velcro straps on the fly wrapping around poles and toggles being secured to loops on the tent body.]
-
Step 12: Final Stake Down
Secure the fly to the tent by attaching the corresponding buckles found on both the fly and the tent body. Stake down the side pullouts and vestibule areas using the eight steel stakes.
[Diagram: Shows buckles connecting the fly to the tent body, and stakes being used to secure the guyout points and vestibule areas of the fly.]
Tent Contents
- Tent body
- Tent fly
- Leg poles (4)
- Ridge pole assembly with hubs (1)
- Spreader pole (1) short
- Frame field repair sleeve (1)
- Steel stakes (8)
- Plastic stakes (4)
- Guylines (4)
Tent Tips
- Always stake down the tent, including all guyout points.
- Increase interior airflow by opening the windows in favorable weather.
Tent Care
- Make sure the tent is completely dry, then store loosely rolled in a dry, cool place.
- Clean your tent by setting it up and wiping it down with a mild soap and lukewarm water. Never use laundry detergent, washing machines, or dryers.
Warranty
Your Eureka! tent is covered by a limited lifetime warranty. For more details, please visit the website or contact customer service.
Questions?
Johnson Outdoors Gear, Inc.
USA: 1-800-572-8822
Johnson Outdoors Canada
Canada: 1-800-263-6390
