Eureka! Vestibule Instructions

Attaching the Vestibule

Attach the vestibule to the tent BEFORE you attach the fly to the tent.

• Hook the center grommet of the vestibule over the fly rod that extends out from the junction tube.
• Slide the vestibule back toward the tent. Pull the reinforcement panel up and over the junction tube.
• Wrap the shock-corded sides over the front poles and attach the S-hooks to the ring & pin at the base of each pole.
• On the four-person model, at the center of each side, attach the clips to the poles.
• Pull the vestibule out and stake the front beckets down. Make sure the flaps are tucked inside the vestibule.
• Attach the fly to the tent.

Diagram Description

The diagram shows a Eureka tent with a vestibule being attached. The vestibule is a fabric extension that provides extra space. The illustration highlights key attachment points:

1. A close-up shows the vestibule's center grommet being placed over a tent pole at the junction tube.
2. Another close-up illustrates how shock-corded sides of the vestibule wrap around the front poles and attach to rings and pins at the base of each pole.
3. For four-person models, clips are shown attaching to poles at the center of each side.
4. The diagram also shows the vestibule being staked to the ground at the front, with flaps tucked inside.