Eureka! Timberline 4 Tent Assembly Instructions
Model: 2627800
Assembly Steps
Step 1: Identify Components
Identify all tent components as listed in the "Tent Contents" section.
All tent components are displayed: tent body, fly, four medium leg poles, one long ridge pole, two short eave pole extensions, and eight steel stakes.
Step 2: Prepare Tent Body
Spread out the tent body on a flat surface. Locate the four corners and the peak shockcord.
The tent body is spread flat, with its four corners and peak shockcord loop clearly visible.
Step 3: Assemble Poles
Assemble the four leg poles and the single ridge pole.
The segmented leg poles and ridge pole are shown assembled into their full lengths.
Step 4: Insert Leg Poles
Verify that the hub orientation indicators are facing UP and RIGHT. Insert the tapered end of each leg pole into the corresponding peak hubs.
A close-up illustrates the correct orientation (UP and RIGHT) of hub indicators and the insertion of a leg pole's tapered end into a peak hub.
Step 5: Insert Ridge Pole
Insert the ridge pole into both peak hubs. Hook the peak shockcord around the peak hubs.
The long ridge pole is inserted into both peak hubs, and the peak shockcord is looped around them.
Step 6: Secure Leg Poles
Insert the metal pins located at the bottom of each leg pole into the corresponding grommets or rings on the tent body.
The metal pin at the base of a leg pole is shown being inserted into a ring on the tent body.
Step 7: Attach Clips and Stake Corners
Attach all the clips on the tent body to the assembled poles. Stake down the four corners of the tent body.
Clips along the tent body are attached to the poles. Stakes are driven into the ground at each of the four tent corners.
Step 8: Attach Eave Pole Extensions
Slide the eave pole extensions onto the ends of the ridge poles at the peak hubs.
The shorter eave pole extensions are slid onto the ends of the ridge poles at the peak hubs.
Step 9: Place Fly
Place the tent fly over the tent body.
The tent fly is positioned over the assembled tent body.
Step 10: Attach Fly Hooks
Insert the two hooks on the underside of the fly into the ends of the eave pole extensions.
Two hooks on the underside of the fly are connected to the ends of the eave pole extensions.
Step 11: Attach Fly to Tent Body
Attach the four hooks on the underside of the fly to the corresponding rings on the tent body.
Four hooks on the underside of the fly are attached to rings located at the corners of the tent body.
Step 12: Secure Fly and Stake Guylines
Secure the fly to the tent by attaching the fly hooks to the metal rings at the tent corners. Stake down the four side guylines.
The fly is further secured by attaching its hooks to metal rings at the tent corners. Four side guylines are staked into the ground.
Tent Contents
- Tent body
- Tent fly
- Leg poles (4) medium
- Ridge pole (1) long
- Eave pole extensions (2) short
- Steel stakes (8)
Tent Tips
- Always stake down the tent, including all guyout points.
- Increase interior airflow by opening the windows in favorable weather.
Tent Care
- Make sure the tent is completely dry before storing it loosely rolled in a dry, cool place.
- Clean your tent by setting it up and wiping it down with a mild soap and lukewarm water. Never use laundry detergent, washing machines, or dryers.
Warranty
Your Eureka! tent is covered by a limited lifetime warranty. For more details, please visit the website or contact customer service.
Questions?
Johnson Outdoors Gear, Inc.
USA: 1-800-572-8822
Johnson Outdoors Canada
Canada: 1-800-263-6390
