Product Information
This document provides instructions for setting up the Eureka! Northern Breeze 10 tent, model number 2626301.
Tent Setup Instructions
Step 1: Identify Components
Identify all tent components. Refer to the list provided below.
[Diagram: Various tent parts laid out, with a callout pointing to a list of components.]Step 2: Prepare Tent Body
Spread out the tent body on the ground. Locate the four corner webbing loops, each equipped with a ring and pin assembly.
[Diagram: Tent body spread flat, close-up of a corner loop with a ring and pin assembly.]Step 3: Assemble Poles
Assemble all tent poles by connecting them end-to-end.
[Diagram: Tent poles being connected to form longer poles.]Step 4: Connect Hub to Roof Poles
Insert the peak hub extensions into the straight end of the roof poles.
[Diagram: Close-up showing a hub extension being inserted into the end of a roof pole.]Step 5: Attach Roof Clips and Eave Hooks
Attach the roof clips, located on the tent fabric, to the top poles. Connect the eave shockcord to the eave hooks.
[Diagram: Close-up showing tent fabric clips attaching to poles and shockcord connecting to hooks on the poles.]Step 6: Connect Bottom to Top Poles
Insert the tapered end of the bottom poles into the top poles.
[Diagram: Close-up showing the tapered end of one pole fitting into the open end of another pole.]Step 7: Insert Pins
Insert the metal pin into the end of each bottom pole.
[Diagram: Close-up showing a metal pin being inserted into the end of a tent pole.]Step 8: Attach Remaining Clips
Attach all remaining clips on the tent fabric to the poles as the tent structure is erected.
[Diagram: Partially erected tent showing clips being attached along the length of the poles.]Step 9: Stake and Guy Out
Stake down the four corners of the tent and attach the eight guylines as illustrated to secure the tent.
[Diagram: Fully erected tent showing stakes driven into the ground at the corners and guylines extending outwards and staked.]
Awning Setup
Step 1: Extend Awning Fabric
Unzip the gussets on the tent and extend the awning fabric.
[Diagram: Close-up of a tent corner showing a zipper being opened and the awning fabric being pulled out.]Step 2: Insert Awning Poles
Assemble the awning poles and insert their tips into the grommets located at the edge of the awning fabric.
[Diagram: Awning poles being assembled and their ends inserted into fabric grommets on the awning edge.]Step 3: Stake and Guy Awning
Attach the guylines to the awning pole tips and secure the awning by guy-ing it out as shown.
[Diagram: Guylines attached to the tips of the awning poles and staked to the ground to hold the awning taut.]
Tent Contents
The tent package includes:
- Screenhouse body with hub
- Aluminum roof poles (4) - CURVED
- Aluminum leg poles (4) - STRAIGHT
- Aluminum awning poles (3)
- Stakes (3) - LONG
- Stakes (16) - SHORT
- Guy lines (11)
Tent Tips
- Always stake down the tent, including all guyout points, for stability.
- Increase interior airflow by opening the windows during favorable weather conditions.
Tent Care
- Ensure the tent is completely dry before storing. Store it loosely rolled in a dry, cool place.
- To clean the tent, set it up and wipe it down with a mild soap and lukewarm water. Never use laundry detergent, washing machines, or dryers.
Warranty
Your Eureka! tent is covered by a limited lifetime warranty. For more details, please visit the website or contact customer service.
Contact Information
For questions:
Johnson Outdoors Gear, Inc.
USA: 1-800-572-8822
Website: www.eurekacamping.com
Johnson Outdoors Canada
Canada: 1-800-263-6390
Website: www.eurekatentscanada.com
