G29/G920 Gaming Wheel Stand Installation Manual

Parts Identification

The gaming wheel stand consists of the following main components:

• Pedal Mount
• Bottom Bracket
• Stand Bars
• Retractable Brackets
• Steering Wheel Base

The accessory kit includes:

• Wrench
• Washers
• M8 x 56mm Bolts (6)
• M8 x 40mm Bolts (2)
• M8 x 36mm Bolts (2)
• M8 x 22mm Bolts (4)
• M8 x 60mm Plastic Screws (2)
• M8 x 34mm Plastic Screws (2)
• M8 Nuts (8)
• M6 Bolts for Gear Shift Support (4)
• Cable Ties (4)
• M8 Non-Skid Foot Screws (4)

Assembly Instructions

Step 1: Attach Pedal Mount to Bottom Bracket

Secure the pedal mount to the bottom bracket using M8 x 56mm bolts for the front section and M8 x 36mm bolts for the back section. Ensure all bolts are tightened securely.

Visual Aid: Close-up views show the specific locations for bolt insertion on the pedal mount and bottom bracket.

Step 2: Install Stand Bars

Attach the stand bars to the bottom of the pedal mount using two M8 x 60mm plastic screws on each side. Subsequently, use two M8 x 56mm screws (one for each side) to fasten the stand bars securely with nuts.

Visual Aid: Images illustrate the attachment points for the stand bars and the use of screws and nuts for securing them.

Step 3: Attach Non-Skid Foot Screws

Screw the four M8 non-skid foot screws into the bottom of the bracket. The height of these foot screws can be adjusted to ensure the stand is level on your surface.

Visual Aid: A diagram shows the placement of the four foot screws at the base of the stand, with a close-up of the adjustable screws.

Step 4: Install Retractable Brackets

Mount the retractable brackets onto the stand using M8 x 34mm plastic screws. The height of these brackets is adjustable to accommodate different user preferences.

Visual Aid: Images show the retractable brackets being attached and highlight the adjustment mechanism for height.

Step 5: Mount Steering Wheel Base

Place the steering wheel base on top of the retractable brackets. Secure it using four M8 x 22mm screws, with two screws on each side, and then fasten them with nuts.

Visual Aid: Close-up views demonstrate how to align and secure the steering wheel base to the retractable brackets.

Final Product and Support

This is the assembled gaming wheel stand. VEVOR specializes in the production of various game stands, offering products with outstanding quality and competitive pricing. For any further questions or assistance, please refer to VEVOR customer support.