A6 Instruction Manual

Product Introduction

This section provides an overview of the A6 camera.

Key Components:

• LED fill light
• Infrared fill light
• HD Camera
• Light sensor
• Reset button
• TF Card slot
• TYPE C Power port

Product Parameters

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference.
• (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Parts list

Device connection

Device binding

1. Download client: Scan the QR code, download and install the "V720" APP, or search "V720" in the app store, download and install the "V720" APP.
2. Power on and reset the device: Plug the power cable into the Micro USB power interface on the back of the camera. The camera will automatically turn on and wait for the motor self-test to complete.

*Do not manually twist the head of the camera to force it to rotate after turning it on.

3. Reset the device: Turn the lens upward to reveal the reset button. Press and hold the reset button with your finger until you hear a beep; the reset is successful.
4. Connect to the Internet: Open the "V720" APP, wait for the "New Device Found" window to pop up, click "Add Device", then add the device according to the APP prompts.

*If no prompt box pops up, please click the "+" in the upper right corner of the APP and choose to add a device.

*When connecting, ensure that the network is open and the camera is turned on normally.

*After successful connection, the device will restart.

Connect to AP mode

1. After resetting the device, open phone settings and find "WLAN" or "Wireless LAN". Connect to the device's hotspot starting with "NAX_".

*When the mobile phone prompts "The current WLAN cannot access the Internet" or "The wireless LAN is not connected to the Internet", please click "Continue trying to use wireless LAN".

2. Return to the "V720" APP and pull down to refresh the page. If the device appears, it means the AP mode connection is successful.

APP operation instructions

Device name: Mini Camera

• Live view
• Clarity adjustment
• Screenshots
• Sound toggle
• Record screen
• Picture reverse
• Fullscreen mode
• 360° Patrol control

Bottom controls: Playback, Speak, PTZ, IR nightvision, Light.

Use and Precautions

Install SD card

Make sure the camera is powered off. Flip the lens upward to reveal the microSD card slot. Insert the microSD card into the card slot in the correct direction.

*To install or remove the microSD card, power off the camera first. Use microSD cards from regular manufacturers (supports FAT32 format only). Recommended read/write speed is not lower than U1/Class10.

Live

Find the device on the home page list for real-time preview. Camera control screen allows for picture interception and definition adjustment.

Play back

In the real-time screen, click the playback button to enter the playback interface. Drag the timeline to select the desired time period.

Precautions

1. The applicable working temperature is -20°C to 60°C. Do not use in extreme temperatures.
2. This is a precision electronic product. Avoid excessively humid environments or places where water may enter the product to prevent affecting normal use.
3. To ensure optimal picture quality, keep the front and sides of the lens away from glass, white walls, and other reflective objects that may cause bright areas nearby or dark/white areas in the distance.
4. Ensure the product is installed within Wi-Fi coverage. Place it in a location with a better Wi-Fi signal and away from microwave ovens or other sources of interference.
5. For maintenance, please contact relevant personnel.