Yeelight Sunset Lamp YLFWD-0006
Introduction
Please read this user manual carefully before operating the product and retain it for future reference.
Product Overview
The lamp features a charging port, an illumination area, an ON/OFF button, and a retractable magnetic base.
It has a 1/4 inch thread compatible with universal tripods.
The lamp body is adjustable and can rotate 360 degrees.
A mounting screw is included for the base.
How to Use
Press the button to turn on the power and switch between modes. The operation is as follows:
- One press (when off): Turns on maximum brightness.
- Two presses: Turns on minimum brightness.
- Third press: Turns off the lamp.
The button allows cycling through these modes sequentially.
Installation
Method 1: Base Mounting
Using a screwdriver, remove the two screw covers located at the bottom of the lamp.
Insert the base mounting screw into the designated position and tighten it. Secure the screw cover.
Method 2: Tripod Mounting
The lamp is equipped with a 1/4 inch nut at its base, allowing it to be mounted on most commercially available tripods (tripod sold separately).
Technical Specifications
| Parameter | Value |
|---|---|
| Model | YLFWD-0006 |
| Rated Voltage | 5V ⎓ 1A |
| Rated Power | 3W |
| Operating Temperature | -10°C to +40°C |
| Dimensions | 82mm x 82mm x 95mm |
| Net Weight | Approx. 300g |
Warnings
- Ensure the power supply voltage matches the product's operating voltage. Incorrect voltage can be dangerous and damage the product.
- If the lamp does not turn on upon first use, it requires charging.
- Install and use the product away from heat sources (e.g., heating systems, air conditioning outlets) and avoid direct sunlight.
- Clean the product surface using a soft cotton cloth without aggressive solvents.
- This device is not waterproof. Protect it from moisture and do not immerse it in water.
- Keep the product away from children to prevent accidents.
- This product is intended for indoor use only.
- The light source is not user-replaceable. Service should be performed by the manufacturer, its service representative, or a qualified technician.
WEEE Information
This symbol indicates that the product is waste electrical and electronic equipment (WEEE, Directive 2012/19/EU) and should not be disposed of with unsorted household waste.
To protect human health and the environment, please hand over your waste equipment to a designated collection point for WEEE, as appointed by government or local authorities. Proper disposal and recycling help prevent potential negative environmental and health impacts. Contact your installer or local authorities for information on collection points and their terms.
