Hover-1 i-200 Electric Scooter Operation Manual

Safety First: Helmets Save Lives!

Always wear a properly fitted helmet that complies with CPSC or CE safety standards when riding your scooter.

Correct Fitting: Make sure your helmet covers your forehead.

Incorrect Fitting: A forehead that is exposed is vulnerable to serious injury.

Low Temperature Warning

Low temperatures can affect the lubrication of moving parts, increasing internal resistance. This can decrease battery discharge capacity and overall battery life. Use caution in cold temperatures (below 40° F).

Safety Instructions

• Keep the i-200 away from heat sources, direct sunlight, humidity, and liquids.
• Do not operate if exposed to water, moisture, or other liquids to prevent electric shock, explosion, or injury.
• Do not use if the i-200 has been dropped or damaged.
• Repairs to electrical equipment should only be performed by the manufacturer. Improper repairs void the warranty and can be dangerous.
• Do not puncture or harm the exterior surface of the product.
• Keep the i-200 free from dust and lint.
• Use the i-200 only for its intended purpose to avoid damage or injury.
• This product is not a toy. Keep out of reach of children.
• Do not expose batteries to excessive heat, direct sunlight, or open flame.
• Keep hands, feet, hair, and clothing away from moving parts, wheels, or drivetrain while the unit is running.
• Do not operate or allow others to operate until all instructions and safety features are understood.
• Consult a doctor if you have a medical condition that could affect your ability to use the i-200.
• Individuals with head, back, or neck ailments, or those who are pregnant, have heart conditions, or have certain mental/physical conditions that impair judgment or capabilities, should not use the i-200.

Notes, Caution, and Warning Symbols

• NOTES: Indicates instructions or relevant facts the user should remember.
• CAUTION: Indicates a hazardous situation which, if not avoided, can cause minor or moderate injury.
• WARNING: Indicates a hazardous situation which, if not avoided, can cause death or serious injury.

Please keep your serial number on file for warranty claims and proof of purchase.

WARNING: Prolonged exposure to UV rays, rain, and elements may damage enclosure materials. Store indoors when not in use.

Introduction

The Hover-1 i-200 is a personal transporter developed with strict testing. Operating without following this manual may lead to damage or injury. This manual provides information for safe operation and maintenance.

Package Contents:

• Hover-1 i-200 Electric Scooter
• Wall Charger
• Operation Manual

Features/Parts:

The i-200 has the following components:

• 1. Fender
• 2. Left Foot Mat
• 3. Battery Indicator
• 4. Right Foot Mat
• 5. Tire
• 6. Power Button
• 7. Charge Port
• 8. Protective Chassis Casing

Operating Principals

The i-200 uses digital electronic gyroscopes and acceleration sensors for balance and motion control, responding to the user's center of gravity. Motors are located within the wheels. An inertia dynamic stabilization system assists balance when moving forward and backward, but not while turning.

TIP: To increase stability during turns, shift your weight to counteract centrifugal force.

WARNING: Any i-200 that does not work properly can cause loss of control and falls. Inspect thoroughly before each ride and do not ride until problems are corrected.

Specifications

Customer Support Phone: (866) 831-1520

Controls and Display

Turning Your Device On/Off:

• Power On: Place the i-200 flat on the floor. Press the power button (rear of the i-200) once. The battery indicator light in the center should illuminate.
• Power Off: Press the power button once.

Mat Sensor:

Four sensors are located under the foot mats. Ensure you step on the foot mats; do not step on other areas. Weight and pressure applied to only one foot mat may cause the i-200 to vibrate or spin in one direction, which is normal.

Battery Indicator:

• Green LED Light: Fully charged.
• Red flashing LED light and beeping: Low battery.
• Yellow light: Charging.

When the LED light turns red, please recharge the i-200.

Bluetooth Speaker

The i-200 features built-in wireless speakers for playing music while riding.

Pairing the Speaker:

1. Turn on your i-200; speakers will announce they are ready for Bluetooth connection.
2. Place the i-200 and your Bluetooth device within operating distance (recommended: within 3 feet).
3. Ensure Bluetooth is enabled on your device.
4. Select "H1-200" from your device's list of available Bluetooth devices.
5. If prompted, enter PIN code "000000".
6. The i-200 will say "Paired" upon successful connection.
7. Pairing mode lasts for two minutes. If no devices are paired, it returns to standby.
8. If pairing fails, turn the i-200 off and repeat the steps.
9. If your smart phone is out of range or the i-200 battery is low, the speaker may disconnect. Reconnect by following the pairing steps or recharging.

Note: The i-200 remembers paired devices and will automatically connect when the device's Bluetooth is active and in range. The scooter supports pairing up to two multi-point devices.

Listening to Music:

Once paired, stream music wirelessly. Only one speaker plays music; the other is for safety alerts. Control volume and tracks via your music device.

Before Riding

It is crucial to understand all elements of your i-200 for full control. Practice at slower speeds in a flat, open area before riding in public.

Pre-Ride Checklist:

• Ensure the i-200 is in proper working order. If any part malfunctions, contact Customer Support.
• Ensure the battery is fully charged.
• Ensure front and back tire screws are locked firmly.
• Wear appropriate safety and protective gear.
• Wear comfortable clothes and flat, closed-toe shoes.
• Carefully read this User Manual for operating principles and tips.

WARNING: A malfunctioning i-200 can cause loss of control and falls. Do not ride with damaged parts; replace them before riding.

Safety Precautions

Be aware of local laws governing riding on public roads. Hover-1 is not liable for violations due to non-compliance with local laws.

• Always wear a CPSC or CE-certified helmet.
• Obey all traffic laws: lights, signs, street directions.
• Ride with traffic, not against it.
• Ride defensively and expect the unexpected.
• Give pedestrians the right-of-way.
• Alert pedestrians before passing them from behind.
• Slow down at intersections and look both ways before crossing.
• The i-200 is not equipped with reflectors; avoid riding in low visibility conditions.

WARNING: In low-visibility conditions (fog, dusk, night), you may be difficult to see, increasing collision risk. Wear bright, reflective clothing and keep your headlight on.

Think about safety to prevent accidents. A checklist for riders:

• Do not ride above your skill level; ensure sufficient practice.
• Before stepping on, ensure the i-200 is on a flat, level surface with the power on and the Running Indicator light green. Do not step on if the light is red.
• Do not attempt to open or modify your i-200, as this voids the warranty and may cause failure, injury, or death.
• Do not use the i-200 in a manner that endangers people or property.
• Maintain a safe distance when riding near others to avoid collisions.
• Keep your feet on the pedals at all times; moving feet off while driving is dangerous and can cause the i-200 to stop or veer.
• Do not operate under the influence of drugs or alcohol.
• Do not operate when restless or sleepy.
• Do not ride off curbs, ramps, or attempt to use in skate parks, empty pools, or similar to skateboards/scooters. The i-200 is NOT a skateboard. Misuse voids warranty and may cause injury or damage.
• Do not continuously spin in place, as it causes dizziness and increases injury risk.
• Do not abuse your i-200; this can damage the unit and cause system failure, leading to injury. Physical abuse, including dropping, voids the warranty.
• Do not operate in or near puddles of water, mud, sand, stones, gravel, debris, or rough terrain.
• Use the i-200 on paved, flat, and even surfaces. Lift over uneven pavement or obstructions.
• Do not ride in inclement weather: snow, rain, hail, sleet, icy roads, extreme heat, or cold.
• Bend your knees on bumpy or uneven pavement to absorb shock and maintain balance.
• If unsure about terrain safety, step off and carry your i-200. Always err on the side of caution.
• Do not attempt to ride over bumps or objects greater than 1/2 inch.
• PAY ATTENTION: Be aware of road conditions, people, places, property, and objects around you.
• Do not operate in crowded areas.
• Operate with extreme caution indoors, especially around people, property, and in narrow spaces.
• Do not operate while talking, texting, or looking at your phone.
• Do not ride where prohibited.
• Do not ride near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The i-200 is intended for single riders only. Do not attempt to ride with two or more people.
• Do not carry anything while riding.
• Individuals with lack of balance should not attempt to operate.
• Pregnant women should not operate the i-200.
• Recommended for riders ages 8 and older.
• At higher speeds, account for longer stopping distances.
• Do not step forward off your i-200.
• Do not attempt to jump on or off.
• Do not attempt stunts or tricks.
• Do not ride in dark or poorly lit areas.
• Do not ride off-road, near potholes, cracks, or uneven surfaces.
• Remember you are 4.72 inches (12cm) taller when operating; ensure safe passage through doorways.
• Do not turn sharply, especially at high speeds.
• Do not step on the fenders.
• Avoid unsafe places with flammable gas, steam, liquid, dust, or fiber, which could cause fire or explosion.
• Do not operate near swimming pools or other bodies of water.

WARNING: When using a hoverboard with a kart (sold separately), it is NOT ADVISABLE to ride uphill. On inclines above 5-10°, a safety mechanism will activate, shutting down the hoverboard. If this occurs, dismount, place on a flat surface, wait 2 minutes, and power on again.

WARNING: Adult supervision is required. Never use in roadways, near motor vehicles, steep inclines, steps, or swimming pools. Always wear shoes and never allow more than one rider.

Riding Your i-200

Failure to follow safety precautions can lead to damage, void warranty, property damage, serious injury, or death.

Familiarize yourself with operating procedures before use.

Operating Your i-200:

Ensure the i-200 is fully charged before initial use.

Diagram Description: To mount, stand behind the i-200. Place one foot on the corresponding foot mat, keeping weight on the ground. Shift weight to the foot on the mat, then quickly and evenly step on with the second foot.

NOTES: Stay relaxed, step on quickly and evenly. Focus on your center of gravity. Vibration or spinning on one foot mat is normal.

Distribute weight evenly to maintain balance. It typically takes 3-5 minutes to get comfortable standing and maintaining balance. A spotter can provide security.

The i-200 is intuitive; focus on your desired direction to move. Your center of gravity determines movement, acceleration, deceleration, and stopping. Tilt your center of gravity in the direction you wish to move.

To turn, focus on the direction and stay relaxed.

WARNING: Do not turn sharply or at high speeds to avoid danger. Do not turn or ride quickly along slopes, as it may cause injury.

As you gain comfort, maneuvering becomes easier. At higher speeds, shift weight to overcome centrifugal force. Bend knees on bumps or uneven surfaces, then dismount and carry the i-200 to a safe surface.

Diagram Description (Riding Posture): Shows body positions for moving backward (leaning back), stopping (upright), and moving forward (leaning forward).

Dismounting Your i-200:

NOTES: Stay relaxed and focus on your center of gravity for control.

To dismount, from a stopped position, lift one leg and step back onto the ground. Then, step off completely.

WARNING: Lift feet completely off the foot mat when stepping back to dismount. Failure to do so may cause the i-200 to spin.

Weight and Speed Limitations:

• Maximum Weight: 160 lbs
• Minimum Weight: 44 lbs
• Maximum Speed: Up to 7 mph

WARNING: Overweight exertion may increase the possibility of injury or product damage.

NOTES: To prevent injury, the i-200 will beep and tilt the rider back when max speed is reached.

Operating Range

The i-200 can travel up to 6 miles on a fully charged battery in ideal conditions. Factors affecting range include:

• Terrain: Smooth, flat surfaces provide the longest distance. Uphill or rough terrain reduces range.
• Weight: Lighter users generally have further range.
• Ambient Temperature: Ride and store within recommended temperatures for optimal range, battery life, and performance.
• Speed and Riding Style: Moderate, consistent speed maximizes distance. High speeds, frequent starts/stops, idling, and frequent acceleration/deceleration decrease range.

Balance & Calibration

If your i-200 is unbalanced, vibrating, or not turning properly, calibrate it:

1. Place the i-200 on a flat, horizontal surface. Ensure foot mats are even and not tilted. The charger must be unplugged, and the board must be off.
2. Press and hold the ON/OFF button for 15 seconds. The scooter will turn on, and the battery indicator will light up.
3. Release the ON/OFF button after the light flashes 5 times consecutively.
4. Turn the board off, then turn it back on. Calibration is now complete.

Safety Alerts

The i-200 will alert users to system errors or improper operation via prompts, including beep sounds that may cause the device to stop suddenly. Pay attention to these alerts:

• Unsafe riding surfaces (uneven, too steep).
• Platform tilted more than 8 degrees forward or backward when stepped on.
• Low battery voltage.
• The i-200 is still charging.
• Platform self-tilts due to excess speed during operation.
• Overheating or high motor temperature.
• The i-200 rocking back and forth for over 30 seconds.
• System enters protection mode (alarm indicator lights up, board vibrates) when battery is low.
• Platform tilted forward or backward more than 8 degrees: the i-200 will power off and stop suddenly, potentially causing a fall.
• Blocked tires: the i-200 will stop after 2 seconds.
• Battery level depleted below protection mode: the engine will power off and stop after 15 seconds.
• Sustaining high discharge current (e.g., climbing a steep slope for a long period): the engine will power off and stop after 15 seconds.

WARNING: When the i-200 turns off during a Safety Alert, all operations halt. Do not attempt to ride. Turn the i-200 off and back on to unlock it from a Safety Lock.

Charging Your i-200

Charging the i-200:

• Ensure the charging port is clean and dry, free of dust or debris.
• Plug the charger into a grounded wall outlet; the charger's indicator light should be green.
• Connect the cable to the power supply (100V ~ 240V; 50/60 Hz).
• Align and connect the 3-pin charging cable to the i-200's charging port. DO NOT FORCE THE CHARGER, as this can break the prongs or cause permanent damage.
• Once connected, the charger's indicator light should turn RED, indicating charging.
• When the charger's RED indicator light turns GREEN, the i-200 is fully charged.
• A full charge takes up to 6 hours. A yellow flashing light on the scooter also indicates charging. Do not charge for more than 7.5 hours.
• After charging, unplug the charger from the i-200 and the power outlet.

Battery Care / Maintenance

Battery Specifications:

• Battery Type: Rechargeable lithium-ion battery
• Charge Time: Up to 6 hours
• Voltage: 36V
• Initial Capacity: 2.0 Ah

Battery Maintenance:

• The lithium-ion battery is built-in. Do not disassemble the i-200 to remove or separate the battery.
• Use only the charger and charging cable supplied by Hover-1. Other chargers/cables may cause damage, overheating, fire risk, and void the warranty.
• Do not connect the i-200 or battery to a power supply plug or car cigarette lighter.
• Do not place the i-200 or batteries near fire or in direct sunlight, as this can cause overheating, breaking, or ignition.
• Do not continue charging if the battery does not recharge within the specified time, as this may cause it to become hot, rupture, or ignite.
• Recycle or dispose of batteries properly according to local, state, and federal laws. Lithium-ion batteries are hazardous materials.
• Do not attempt to modify, change, or replace your battery.

WARNING: Failure to follow safety precautions can lead to serious bodily injury and/or death.

WARNING: Seek immediate medical assistance if exposed to any substance emitted from the battery.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Instructions for a Class B Digital Device or Peripheral:

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per instructions, may cause harmful interference to radio communications. There is no guarantee interference will not occur in a particular installation. If interference occurs, try correcting it by reorienting/relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer or technician.

Care & Maintenance

• Avoid exposing the i-200 to liquid, moisture, or humidity to prevent damage to internal circuitry.
• Do not use abrasive cleaning solvents.
• Avoid extremely high or low temperatures, which shorten component life, damage the battery, or distort plastic parts.
• Do not dispose of the i-200 in fire, as it may explode or combust.
• Do not expose to contact with sharp objects, which cause scratches and damage.
• Do not allow the i-200 to fall from high places, as this may damage internal circuitry.
• Do not attempt to disassemble the i-200.
• Use only the charger provided by Hover-1.

WARNING: Avoid using water or other liquids for cleaning. If liquids enter the i-200, it will cause permanent damage to internal components.

WARNING: Users who disassemble the i-200 scooter without permission will void the warranty.

Warranty

For warranty information, please visit: www.hover-1.com

Affix Serial Number Label Here: [Space for label]

Contact & Social Media

Connect with Hover-1:

• Facebook: @RideHover1
• Instagram: @RideHover1
• Twitter: @RideHover1
• Phone: (866) 831-1520
• Website: www.Hover-1.com