AromaPlan Diffuser Owner's Manual
For White Diffuser DAP-1001 & Black Diffuser DAP-1002
Cautions
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLING AND USING THE DIFFUSER.
Avoid casualties and property loss. Always follow the instructions below.
WARNING
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, property damage, and injury to persons, including the following:
- Use appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, property damage, or injury to person.
- To avoid fire or shock hazards, plug the appliance directly into a safe electrical outlet. DO NOT plug in the cord with wet hands.
- Keep the cord out of heavy traffic areas.
- DO NOT operate any appliance with a damaged cord or plug, after the appliance malfunctions, or if it has been dropped or damaged in any manner.
- DO NOT use the diffuser in a high temperature or wet environment.
- DO NOT allow the mist outlets to face the wall directly. Install the diffuser in a ventilated and adequate space.
- NEVER place the diffuser in an area where it is accessible to children.
- DO NOT operate the diffuser without first turning off the unit. Failure to heed this warning may cause personal injury. NEVER tilt, move, or attempt to empty the unit while operating.
- DO NOT block the air outlet while the unit is running.
- Always place the diffuser on a firm, flat, level surface. NEVER place it on a rug or carpet, or on a finished floor that may be damaged by exposure to water or moisture.
- DO NOT use inflammable, explosive, corrosive, and other hazardous solvents with the diffuser. DO NOT spill water or corrosive liquid on the diffuser surface.
- Suggested average daily usage time should not exceed 14 hours.
- Shut down the unit in an extreme weather environment.
AromaPlan Diffuser
AromaPlan's scent diffusers are powerful and easy to use. Our innovative technology converts liquid perfume into dry vaporous microparticles, creating a practically invisible mist that drifts evenly throughout any space.
Unlike scented candles, where most scent is immediately around the candle, AromaPlan diffusers ensure the space is evenly scented, regardless of your location.
AromaPlan diffusers offer ultimate control. Program working periods and intervals, including automatic turn-on and turn-off times, to perfectly scent your environment according to your daily needs without wasting fragrance.
Features:
- Covers up to 1,500 SQ FT
- NO FLAME
- No water is required with our scents.
- ECO-FRIENDLY
- NO RESIDUE
- PET-FRIENDLY
- Easy floor or wall installation.
- Space evenly scented.
- Diffusion without heating or water.
- Automatic scheduling on/off according to your daily needs.
- Ultracold mist.
- Microparticles permit immediate and even diffusion for lasting results.
Specifications
| Model | DAP 1001 (White) / DAP 1002 (Black) |
|---|---|
| Voltage | 12V |
| Power | 7.5W |
| Capacity | 10.14 fl oz / 300ml |
| Weight | 0.9KG |
| Coverage | up to 1500SF |
| Size | (L) 6.7 in X (W) 3.17 in X (H) 8.11 in |
Dimensions:
Length: 6.7 inches
Width: 3.17 inches
Height: 8.11 inches
Accessories and Spare Parts
| Name | Quantity | Name | Quantity |
|---|---|---|---|
| Aroma diffuser | 1PC | Manual | 1PC |
| Adapter | 1PC | Fragrance card | 1PC |
| Cap | 1PC | Nozzle gasket | 2PC |
| Thank you Card | 1PC | Key | 1PC |
| Pneumatic fittings | 1PC | Fragrance oil bottle | 1PC |
How to Use the Equipment
Follow these steps to use your scent diffuser:
- Choose scent: Select your favorite AromaPlan scent.
- Unlock atomizer: Use the safety key to unlock the atomizer.
- Remove atomizer: With the equipment off, remove the atomizer from the diffuser.
- Add fragrance: Unscrew the fragrance oil bottle and pour its essence into the container.
- Attach atomizer: Fit the atomizer to the bottle and screw it on tightly.
- Connect atomizer: Fit the atomizer to the diffuser and use the safety key.
- Plug in: Plug the power cord into the equipment and turn on the diffuser.
- Start setup: Begin setup through the app.
APP Operations and Settings
ATTENTION! This diffuser is fully APP controlled via Bluetooth. If you have other questions, please contact our CUSTOMER SERVICE!
- Install the APP: Download the app via QR code.
- Open the APP: Swipe the initial slides and click on the button [EXPERIENCE IMMEDIATELY]. Ensure Bluetooth is enabled on your smartphone and turn your diffuser on.
- Bluetooth Connection: Go to Settings on your smartphone and make sure Bluetooth is ON. Click [BLUETOOTH], the APP automatically searches for nearby diffusers, and click on the diffuser name to connect. The default password is: "1234".
- Control Interface: The control interface allows you to control the diffuser's functions (ON/OFF, TIMES, DAYS). Follow the operation of your equipment through the animate countdown timer of working time. You can set the WORK time and the essence diffusion PAUSE time.
- Click [ON/OFF] to turn the diffuser On or Off.
- Click [Set] to configure the Working Period and Working Frequency.
- Click [Fan] to turn the fan on or off.
- Working Period Panel: Clicking [Set] opens the Working Period Panel. You can change the working hours and pauses for each day of the week, or select specific days to change them accordingly. The selected day of the week will be highlighted when clicked.
Reset AromaPlan Diffuser to factory settings:
- Ensure the diffuser is connected to power.
- On the left side of the diffuser, press and hold the button below the light until you hear 5 continuous BEEPS. Release the button.
- Wait about a minute for the diffuser to restart.
- When you hear a long BEEP, the diffuser will reset to its original factory settings.
Frequently Asked Questions
- How to clean the diffuser?
Let the diffuser run for 10 minutes with liquid alcohol to clean the filter and diffuser nozzle at each fragrance change. - How long does the fragrance oil last before I need to refill the diffuser?
On average, this diffuser consumes 1ml per hour. - How do I connect my diffuser to the air conditioner?
To connect your diffuser to the air conditioner, please contact customer service for instructions.
Warranty
- The equipment has a 1-year warranty from its date of purchase (please keep your proof of purchase).
- This warranty does not cover damage resulting from human error, faulty operation, unauthorized attempts to repair, or from any use not in accordance with the instruction manual.
Register your diffuser through the QR code to get a 1-year warranty.
After Sales Service Support
- Free Technical Solutions and Installation Process Guidance.
- Free online FAQ consultation and scent-marketing suggestions.
Contact Information
AromaPlan United States
Distributed by Fullysense LLC
Website: www.aromaplan.com
Follow us on our social networks:
Customer Service:
Email: support@aromaplan.com
Phone: +1321710-9232
WhatsApp: +1407 312-3317
FCC Compliance Information
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
