AromaPlan DAP PRO Scent Diffuser

Fault Inspection

Customer Service

For questions, assistance, or technical issues, contact:

Email: support@aromaplan.com

Phone: +1 407 233-4143

Warranty

This product has a limited 6-month warranty from the date of purchase. Proof of purchase is required for validation.

The warranty covers manufacturing defects only and does not cover:

• Damage from drops or physical impact.
• Leaks or spills due to improper use.
• Misuse or negligent handling.
• Unauthorized repair attempts.
• Use not in accordance with the user manual guidelines.

Cautions

WARNING: Basic precautions should always be followed to reduce the risk of fire, electric shock, property damage, and injury.

Installing

• Plug the appliance directly into a safe electrical outlet. Do not plug in with wet hands.
• Keep the cord away from heavy traffic areas.
• Do not operate with a damaged cord or plug, or after malfunction, dropping, or damage.
• Do not use in high temperature or wet environments.
• Do not direct mist towards walls; install in a ventilated space.
• Never place the diffuser where children can access it.
• Turn off the unit before operating. Never tilt, move, or attempt to empty while operating.
• Do not block the air outlet while the unit is running.
• Always place the diffuser on a firm, flat, level surface. Avoid rugs or carpets that may be damaged by moisture.
• Do not use inflammable, explosive, corrosive, or hazardous solvents. Do not spill water or corrosive liquid on the surface.

Suggested average daily usage should not exceed 14 hours. Shut down the unit in extreme weather.

ATTENTION

This diffuser is designed for fragrance oil only, without adding water. AromaPlan fragrance oils are exclusively recommended for optimal performance.

Download Installation Manual: Scan the QR code to download the manual.

Aromaplan United States

Distributed by FULLYSENSE LLC

Contact: support@aromaplan.com | +1 (407) 233-4143

Follow us: @aromaplanglobal | WWW.AROMAPLAN.COM

FullySense GROUP

USER MANUAL

Scent Diffuser DAP PRO WHITE / BLACK

AromaPlan: POWERFUL, SAFE, AND EASY TO USE

Certifications: FC CE ROHS

Introduction

Scent Diffuser DAP PRO WHITE / BLACK

AromaPlan's diffuser effectively scents any environment. The nebulizer provides coverage up to 2,000 sq. ft., ensuring spaces smell pleasant. The DAP PRO Diffuser is Bluetooth compatible and controlled via the AromaPlan app for adjusting intensity and scheduling.

Specifications

• SIZE: W171.2*D77*H204.6(MM)
• CAPACITY: 300ML
• N.W.: 1.0KG
• COVERAGE: 2,000 SQ FT
• VOLTAGE: 12V
• POWER: 4W
• NOISE: ≤35DB

Features:

• Coverage: up to 2,000 sq./ft.
• Controlled via the AromaPlan app
• Heatless & waterless atomizer technology
• Easily adjust scent intensity and schedules

Components:

• Atomizer Head
• Nozzle
• Fragrance Oil bottle
• Oil tube
• Working Period Adjustment Button
• Intensity adjustment button

How to use the device

1. Choose your favorite AromaPlan fragrance.
2. With the equipment turned off, remove the atomizer head.
3. Unscrew the atomizer head counterclockwise.
4. Add your favorite fragrance oil.
5. Attach the atomizer to the bottle and insert it into the device.
6. Optional: Use the flexible hose to connect to an HVAC system.
7. Plug the power cord into the equipment and turn on the diffuser.
8. Set working hours/intensity using the device buttons.
9. Setup the device through the App or buttons.

Connection Instructions

Important Notes:

• This device is compatible with Bluetooth-enabled devices. Ensure Bluetooth is ON.
• Enable location services on your mobile phone.

Where to download the AromaPlan app: Scan the QR Code to download the app. Available on the App Store and Play Store.

Attention: Your Scent Diffuser DAP PRO can only be configured using the app.

Operation Introduction

Button Operation Instructions:

• Turn On/Off: Long press the "L" button until a beep is heard.
• Turn On/Off the Fan: Long press the "<0xF0><0x9F><0xAA><0x9F>" button until a beep is heard.

Intensity and Working Period Adjustment:

• Working Frequency Adjustment: Short press the "$" button to cycle through working frequency levels (Min to Max).
  
  • Min: Work 30s, pause 120s
  • Low: Work 60s, pause 120s
  • Med: Work 60s, pause 60s
  • High: Work 120s, pause 30s
  • Max: Work 300s, pause 30s
• Working Period Adjustment: Short press the "<0xE2><0x8F><0xB3>" button to adjust the working period in cycles from 1H to 24H.
  
  • 1H: Work for 1 hour
  • 3H: Work for 3 hours
  • 6H: Work for 6 hours
  • 8H: Work for 8 hours
  • 12H: Work for 12 hours
  • 24H: Work for 24 hours

Factory Reset:

Long press the "<0xE2><0x8F><0xB3>" and "L" buttons simultaneously until five beeps are heard. The equipment will reset to factory settings.

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC Warning

English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

French: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.