AromaPlan™ Black Diffuser - DAP-102NP

White Diffuser DAP-101NP

AromaPlan scent diffusers are powerful, easy to use, and the most silent devices available. Our innovative technology converts liquid perfume into dry vaporous microparticles, creating a practically invisible mist that drifts evenly throughout any space. Unlike candles, our devices ensure even scent distribution regardless of proximity.

These devices are perfect for scenting any setting, controlling foul odors, and improving indoor air quality in business and home environments. With AromaPlan's diffuser, you have ultimate control. You can schedule fragrance strength and automatic on/off times to perfectly scent your environment according to your daily needs, without wasting fragrance.

Features:

• Easy floor or wall installation.
• Evenly scented space.
• No Residue.
• Safe for Kids & Pets.
• Physical diffusion without heating and water.
• Automatic scheduling on/off according to daily needs.
• Ultracold mist.
• Microparticles permit immediate and even diffusion for lasting results.
• Automatic mode.
• Easily control fragrance concentration.

Key Features Icons: [No Flame] [No Residue] [Eco-Friendly] [Pet-Friendly]

Attached Warranty Card

Please keep the instruction and warranty card carefully for future reference. Read all instructions before using the machine.

I. Cautions

WARNING

May cause electric shock or fire hazard.

PROHIBITION

INSTALLING

• Do not use unsafe plugs or power.
• Do not install the device where children can reach it.
• Do not install the device in a place that cannot bear strength and is prone to falling or collapsing.
• Do not tilt the device.
• Keep the device away from fire and heat sources; prohibit storing flammable and explosive materials around the device.
• Except for the atomizer, the housing material is not resistant to corrosion.
• Do not use the device in high temperature or wet environments.
• Do not use inflammable, explosive, corrosive, or other hazardous solvents with the device.

NOTE

May cause personal injury or property damage.

NECESSARY

INSTALLING

• Ensure the firmness of the installation area.
• Install the device in a ventilative and adequate space.
• Do not block the sprayer with your hand or other obstructions when the device is working.
• Do not spill water or conductive, corrosive liquid on the device surface or allow it to fall inside the device.
• Do not operate the device continuously. Suggested average daily usage time should not exceed 14 hours, and the third level is recommended.
• Cut off the power in extreme weather conditions.

II. Specification

Parameter

• Model: PR0300
• Voltage: 12V
• Power: 7.5W
• Capacity: 300 ml
• Weight: 0.9 KG
• Coverage: 300-400 m²
• Size: 170(L) x 80.5(W) x 206(H) mm

ATTENTION: Screws are optional parts for wall mounting. The air conditioning tube is optional. Contact via email for more information and installation guidance.

Diagram showing the dimensions of the diffuser: 170mm length, 80.5mm width, 206mm height. Components shown are Atomizer, One-time inner stopper, Nozzle, and Fragrance oil bottle.

III. Instruction

Approved Certificates: CE, FCC, RoHS, CNAS.

Application Places: Brand clothing stores, 4S shops, bars, clubhouses, etc.

IV. How to use the equipment

1. Choose your favorite AromaPlan scent.
2. With the equipment off, remove the atomizer from the diffuser.
3. Unscrew the fragrance oil bottle and pour its essence into the container.
4. Fit the fragrance oil bottle into the atomizer.
5. Fit the atomizer to the diffuser and use the safety key.
6. Plug the power cord into the equipment and turn on the diffuser.
7. Configure the equipment to mist your environment.
8. Enjoy your fragrance.

V. Operation Introduction

1. APP Operation Introduction

The device has four buttons:

• (BACK): Return button.
• (ENT): Confirmation button.
• Δ: Increase button.
• ►: Shift button.

NORMAL WORKING INTERFACE: Displays time, day, Working (W) seconds, Pause (P) seconds, and intensity level (e.g., B).

2. Buttons operation:

• Press (BACK) and (ENT) simultaneously to enter the password setting interface.
• Press (ENT) and Δ simultaneously to turn the essential oil detection function on/off.
• Press Δ to adjust the concentration level (A, B, C).
• Press Δ and ► simultaneously to enter the local time setting interface.
• Press ► to enter the working time and frequency setting interface.
• Long press (BACK) to turn the fan on/off.
• Long press ENT to turn off the machine.

3. Factory Reset:

From the normal working interface, press (BACK) and ► simultaneously until YES/NO appears. Use ► to select YES and press ENT to confirm.

4. Configure your diffuser

1. Programming Date/Time:

After plugging in the machine, press Δ and ► simultaneously to update the time (24-hour format). Press Δ to adjust the hour, then ► to adjust the minutes. Press ► to confirm and finish time setting.

DATE/TIME INTERFACE: Displays current time and date.

Next, set the day of the week and the date. Press Δ to change the item and ► to move to the next item. Press ► to confirm and finish the setting.

2. Scenting schedule configuration:

Programming working hours

After configuring date and time, press ► to enter the scenting schedule settings. Press ► again to move from the current day to the hour.

Adjust the Start Time (St) by pressing Δ for the hour and ► for the minutes. Press ► again to move to the End Time.

Programming working intervals

Adjust fragrance intensity by setting working intervals (seconds). Press ► to access Working (W) seconds (duration of fragrance release). For example, set to 30 seconds (30s) using Δ. Press ► to move to Pause (P) seconds (resting time). For example, set to 90 seconds (90s) using Δ.

Press ► to return to the Normal Working Interface, showing the countdown for Working (W) and Pause (P) seconds. You can program up to five schedules.

NORMAL WORKING INTERFACE: Shows W/ 30s, P/ 90s, and intensity level A.

3. Scenting schedule configuration (Intensity):

The diffuser has three intensity settings (A, B, C) for different space sizes. From the home screen, press Δ to cycle through intensities. Intensity A is for spaces up to 1000 sq ft, B for up to 1500 sq ft, and C for above 1500 sq ft. For increased intensity, hold ► for 5 seconds to enter turbo mode.

VI. Accessories and spare parts

Clean the equipment periodically (suggested every 2-3 months) for optimal performance. Disconnect power before cleaning and avoid using wet hands to prevent electric shock.

1. Long-term non-use:

• Turn off and unplug the power cord.
• Clean filter components.
• Place a deodorant package with activated carbon inside the device or package to prevent odor from residual substances.
• Cover the machine with a dust cover and place it in a shaded, ventilated area.

VII. Accessories and spare parts

VIII. After-sales Service

• Provide free technical solutions and installation process guidance.
• Provide free online FAQ consultation and scent-marketing suggestions.

IX. The equipment warranty and precautions

• The equipment has a 1-year warranty from the date of purchase.
• Provide the warranty card, invoice, or other proof of purchase for free maintenance.
• Faults caused by human error or incorrect operation are not covered by the warranty and will not be accepted for free maintenance.

Contact Information

Email: support@aromaplan.com

Phone: +1321710-9232

WhatsApp: +1407312-3317

Follow us on social networks: @aromaplanglobal

Website: www.aromaplan.com