Welcome
Welcome, and thank you for purchasing a Caséta Wireless plug-in lamp dimmer. Before you install the plug-in lamp dimmer, please watch the installation video at www.casetawireless.com/support. We hope you enjoy the convenience of Caséta Wireless!
Double Your Warranty
Love Caséta Wireless dimmers? Have ideas for making them better? Tell us what you think and we’ll extend your warranty by 1 year. Visit www.casetawireless.com/register.
Contents Supplied
- Plug-in lamp dimmer (PD-3PCL)
Works With Energy Efficient Dimmable Light Bulbs
- LED: up to 100 W
- CFL: up to 100 W
- Halogen: up to 300 W
- Incandescent: up to 300 W
Note: You can mix and match dimmable LED and CFLs as well as halogen and incandescent light bulbs with Caséta Wireless dimmers. Dimmable LED and CFL light bulbs vary in their dimming performance. If you’re using these bulbs and they flicker or turn off, please visit www.casetawireless.com/lowend for information on adjusting the dimmer for best bulb performance. For a complete list of compatible dimmable CFLs and LEDs, please visit www.casetawireless.com/bulblist.
Compatible Light Bulbs Include:
- Cree® BA19-08027OMF-12DE26-1U100
- Feit® A19/OM800/LED
- Philips® 9290002268
- Philips® 9290002267
- Sylvania® LED8A/DIM/F/827
Installing Your Lamp Dimmer
Step 1: Turn on the lamp
Turn on the lamp you want to control and unplug it.
Step 2: Connect the lamp(s)
Plug the lamp cord into either side of the Caséta Wireless plug-in lamp dimmer. If you want to control a second lamp, turn it on and plug it into the other side.
Step 3: Plug in the lamp dimmer
Plug the lamp dimmer into a wall outlet.
Device Ratings
Plug-in lamp dimmer PD-3PCL: 120 V~ 50/60 Hz.
Important Notes
- For indoor use only.
- Operate between 32 °F (0 °C) and 104 °F (40 °C).
Using Your Controls
Plug-in Lamp Dimmer Controls
The plug-in lamp dimmer has the following controls: On, Off, Brighter, Darker.
Pico® Remote Control (Sold Separately)
The Pico® remote control features the following buttons: On, Off, Favorite, Brighter, Darker.
Pairing the Lamp Dimmer and Pico® Remote Control
Without a Smartphone or Tablet (Bridge Not Required)
- Step 1: Press and hold "Off" button on dimmer
Hold the "Off" button on the dimmer for 6 seconds until the LED starts blinking. - Step 2: Press and hold "Off" button on remote
Hold the "Off" button on the Pico remote for 6 seconds until the lights flash 3 times. Repeat these steps to pair other Pico® remote controls.
Changing the Favorite Light Level
On the Pico® Remote Control (Optional, Sold Separately)
You can use the round "Favorite" button on the Pico remote control to recall a favorite light level. To change the favorite level:
- Step 1: Press and hold "Off" button on dimmer
Hold the dimmer's "Off" button for 6 seconds until its LED blinks twice. - Step 2: Press and hold "Favorite" button on remote
Hold the Pico remote's "Favorite" button for 6 seconds until the plug-in lamp dimmer LED blinks twice. The new favorite level is now saved.
Using Your Caséta® Wireless Plug-in Lamp Dimmer with a Smartphone or Tablet
(Bridge Required, Sold Separately)
The Caséta Wireless plug-in lamp dimmer can be controlled from a smartphone when used with the Lutron® Smart Bridge™. If you are using the dimmer and remote control with the Lutron® Smart Bridge™, follow the instructions below.
Note: If you are using the dimmer and remote control with another manufacturer’s bridge, please refer to that manufacturer’s instructions for set-up.
- Step 1: Download the Lutron® App
Search for “Lutron Caseta” in your device’s app store and download the Lutron® app. - Step 2: Launch the Lutron® App
The Lutron® app will walk you through setting up your devices. - Step 3: Use the Lutron® App to complete all remaining steps
The app allows you to add devices (Pico® remotes, Dimmers, Shades), schedule your lights, and connect while away.
Troubleshooting
Symptoms and Probable Cause/Action
| Symptom | Probable Cause and Action |
|---|---|
| Lamp does not turn on or lamp dimmer LED does not light up. | • Light bulb(s) burned out. • Lamp is turned off. • Lamp is not plugged in. • Outlet is switched off. |
| Light does not respond to Pico® remote control. | • The dimmer failed to pair with Pico® remote control; see Pairing the lamp dimmer and Pico® remote control. • The dimmer is already at the light level the Pico® remote control is sending. • The Pico® remote control is outside the 30 ft (9 m) operating range. • The Pico® remote control battery is low. • The Pico® remote control battery is installed incorrectly. |
| Bulbs turn off while being dimmed. | Verify bulbs are marked dimmable and visit www.casetawireless.com/lowend for information on adjusting the dimmer for best bulb performance. |
| Bulbs turn on at high light level but do not turn on at a low light level. | |
| Bulbs flicker or flash when dimmed to a low light level. |
For additional troubleshooting suggestions, go to www.casetawireless.com/support.
Warranty Information
For warranty information, please visit www.casetawireless.com/warranty.
Important Notes and Compliance
CAUTION
To avoid overheating and possible damage to other equipment, do not use to control motor-driven appliances, or transformer-supplied appliances.
Codes
Install in accordance with all national and local electrical codes.
FCC/IC Information
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299, U.S.A.
Lutron®, , and Pico® are registered trademarks and Caséta® and Smart Bridge™ are trademarks of Lutron Electronics Co., Inc. Google and the Google logo are registered trademarks of Google Inc., used with permission.
© 2014 Lutron Electronics Co., Inc. P/N 0301732 REV B
