Caséta Wireless Quick-Start Guide

Double Your Warranty

Love Caséta™ Wireless dimmers? Have ideas for making them better? Tell us what you think and we'll extend your warranty by 1 year. Visit www.casetawireless.com/register.

Contents Supplied

• Plug-in lamp dimmer (PD-3PCL)
• Pico® remote control (PJ2-3BRL)

Works with energy efficient dimmable light bulbs:

• LED: up to 100 W
• CFL: up to 100 W
• Halogen: up to 300 W
• Incandescent: up to 300 W

Note: You can mix and match dimmable LED and CFLs as well as halogen and incandescent light bulbs with Caséta™ Wireless dimmers. Dimmable LED and CFL light bulbs vary in their dimming performance. If you're using these bulbs and they flicker or turn off, please visit www.casetawireless.com/lowend for information on adjusting the dimmer for best bulb performance.

For a complete list of compatible dimmable CFLs and LEDs, please visit www.casetawireless.com/bulblist.

Compatible light bulbs include:

• Cree: BA19-080270MF-12DE26-1U100
• Feit: A19/OM800/LED
• Philips: 9290002268, 9290002267
• Sylvania: LED8A/DIM/F/827

Installing Your Lamp Dimmer

Step 1: Turn on the lamp

Turn on the lamp you want to control and unplug it.

Step 2: Connect the lamp(s)

Plug the lamp cord into either side of the Caséta™ Wireless plug-in lamp dimmer.

Important note: Use only with dimmable LED, dimmable CFL, halogen, or incandescent lamps. Do not exceed the total maximum wattage shown below:

If you want to control a second lamp, turn it on and plug it into the other side.

Important notes:

• For indoor use only.
• Operate between 32 °F (0 °C) and 104 °F (40 °C).

For advanced features, tips for using Caséta™ Wireless dimmers with CFLs and LEDs, the complete Caséta™ Wireless product line, and more, please visit www.casetawireless.com/features.

Warranty

For warranty information, please visit www.casetawireless.com/warranty.

Using Your Controls

Diagram: Controls Overview

Plug-in lamp dimmer: Controls include On, Brighter, Darker, Off.

Pico® remote control: Controls include On, Favorite, Darker, Off.

Device Ratings

• Plug-in lamp dimmer PD-3PCL: 120 V~ 50/60 Hz
• Pico® remote control PJ2-3BRL: 3 V 10 mA (1) CR2032 battery (included)

CAUTION

To avoid overheating and possible damage to other equipment, do not use to control motor-driven appliances, or transformer-supplied appliances.

Codes

Install in accordance with all national and local electrical codes.

FCC/IC Information

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

Using Your Caséta™ Wireless Kit

With a smartphone or tablet (Bridge required, sold separately)

The Caséta™ Wireless plug-in lamp dimmer can be controlled from a smartphone when used with the Lutron® Smart Bridge™. If you are using the dimmer and remote control with the Lutron® Smart Bridge™, follow the instructions below.

Note: If you are using the dimmer and remote control with another manufacturer's bridge, please refer to that manufacturer's instructions for set-up.

1. Download the Lutron® app

Search for "Lutron Caseta" on the Google Play Store or Apple App Store.

Visit www.casetawireless.com/LutronApp for more information.

2. Launch the Lutron® app

The Lutron® app will walk you through setting up your devices.

3. Use the Lutron® app to complete ALL remaining steps

• Add devices (Pico remotes, Dimmers, Shades)
• Control three ways
• Schedule your lights
• Connect while away

Without a smartphone or tablet (Bridge not required)

Pairing the lamp dimmer and Pico® remote control

Step 1: Press and hold "off" button on dimmer

Hold for 6 seconds until the LED starts blinking.

Step 2: Press and hold "off" button on remote

Hold for 6 seconds until lights flash 3 times.

Repeat steps to pair other Pico® remote controls.

Changing the favorite light level on the Pico® remote control (optional)

You can use the round "favorite" button on the Pico® remote control to recall a favorite light level. We've set it to 50%, but you can change it to any level you like.

Step 3: Set desired light level on dimmer

Step 4: Press and hold "favorite" button on remote

Hold for 6 seconds until the plug-in lamp dimmer LED blinks twice. New favorite level is now saved.

Troubleshooting

Go to www.casetawireless.com/support for additional troubleshooting suggestions.