Welcome to PLAUD NOTE!
Package Contents
- 1x Plaud Note
- 1x MagSafe compatible case
- 1x MagSafe adapter for non-Apple phones
- 1x USB-A charging cable
- 1x USB-A to USB-C adapter
- 1x Manual
Specifications
- Connectivity: WiFi + Bluetooth
- App: Android and iOS
- Storage: 64 GB internal – 10,000 minutes cloud
- Dimensions: 85.6 x 54.1 x 2.99 mm
- Weight: 29.6 g
- Battery: 400 mAh / 3.8 V
- Charging: USB-A charging cable with magnetic connector
- File format: WAV
- Case material: Aluminum
Indicator Lights
App Connection Status
- Blinking white light: Waiting for PLAUD app connection.
- Solid white light: PLAUD app successfully connected.
Recording Status
- Solid red light: Recording is ON.
- Red light off: Recording is OFF.
Battery Status (short press button)
- Solid white light for 5 seconds: Battery > 10%.
- Solid purple light blinking for 5 seconds: Battery < 10%.
Charging Status
- Solid green light: Battery = 100%.
- Solid purple light: Battery is charging.
Storage
- Flashing yellow light: Storage is full.
Getting Started
Follow these steps to set up your PLAUD NOTE:
-
Download the PLAUD app from your device's app store.
Search for the PLAUD app in the [App Store] or [Google Play] and install it.
-
Create your PLAUD account.
-
Wake up your PLAUD NOTE by briefly pressing the record button. A white indicator light will illuminate, signaling it's ready to connect.
-
Open the PLAUD app and follow the on-screen instructions to complete the pairing process.
Tap the [Connect button] within the app to initiate pairing.
Start Recording
The PLAUD NOTE features two recording modes:
-
Note Recording Mode: To record notes, slide the switch down.
(Diagram description: A slider switch on the device, shown in the 'down' position for note recording.)
-
Call Recording Mode: To record calls, slide the switch up.
(Diagram description: A slider switch on the device, shown in the 'up' position for call recording.)
Important Note: For recording phone calls, ensure the PLAUD NOTE device is in PHONE CALL recording mode and securely attached to the back of your phone using the provided MagSafe case.
Recording Actions
-
Start Recording: Press and hold the record button for 1 second until you feel one vibration, indicating recording has started.
(Diagram description: A hand pressing the record button for 1 second, followed by an icon showing one vibration pulse.)
-
End Recording: Press and hold the record button for 1 second until you feel two vibrations, indicating recording has ended.
(Diagram description: A hand pressing the record button for 1 second, followed by an icon showing two vibration pulses.)
EU Declaration of Conformity
Shenzhen Smart Connect Technology Co., LTD hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.plaud.com/
Contact Information
EU Contact Address:
Tygotec s.r.o.
Studeněves 138
Studeněves 273 79
Support Email: info@tygotec.eu
