Paulmann Soley Solar LED Bollard Luminaire

Product Overview

This document provides installation instructions for the Paulmann Soley Solar LED Bollard Luminaire. The luminaire is designed for outdoor use and features an IP44 rating, indicating protection against solid objects greater than 1mm and water splashes from any direction. It is powered by a rechargeable Li-ion battery and includes a motion sensor.

Package Contents

The package typically includes the luminaire, mounting hardware, and potentially a rechargeable battery. Please refer to the visual guide for specific components.

Installation Instructions

Step A: Battery Installation

Important: Only use the specified rechargeable 1xLi-ion Battery (DC3.7V, 1800mAh). Ensure correct polarity when inserting the battery.

Visual Description: An illustration shows the battery compartment of the luminaire. An arrow indicates inserting the battery with the correct positive (+) and negative (-) terminals aligned.

Step B: Powering On/Off

Visual Description: An illustration shows a switch labeled 'ON/OFF' on the luminaire, indicating how to turn the device on or off.

Step C1: Mounting the Bollard (Ground Installation)

Visual Description: An illustration shows the bollard being inserted into the ground. Mounting screws and a bracket are depicted, suggesting a secure attachment method.

Step C2: Mounting the Bollard (Alternative Ground Installation)

Visual Description: Another illustration shows the bollard being secured to the ground using screws, possibly indicating a different type of ground surface or mounting requirement.

Operating Modes and Sensor Functionality

The luminaire features a motion sensor and can operate in different modes based on ambient light and detected motion.

Mode 1: Low Light Conditions (10% Brightness for 15 Hours)

Visual Description: An icon of a sun and moon indicates operation during dusk and night. Text indicates '6-8H' (likely charging time) and '10% T=15H' (10% brightness for 15 hours). A diagram shows the light emitting at a low level. A subsequent diagram shows a person walking within the sensor's range (120° angle, max 6m distance), triggering the light.

Mode 2: Low Light Conditions (100% Brightness for 1 Hour)

Visual Description: Similar to Mode 1, but the text indicates '100% T=1H' (100% brightness for 1 hour). A diagram shows the light emitting at full brightness when motion is detected.

Mode 3: Low Light Conditions (10% Brightness for 4 Hours)

Visual Description: An icon of a partly cloudy sun and moon indicates operation. Text indicates '6-8H' and '10% T=4H' (10% brightness for 4 hours). A diagram shows the light emitting at a low level.

Mode 4: Low Light Conditions (100% Brightness for 0.5 Hours)

Visual Description: Similar to Mode 3, but the text indicates '100% T=0.5H' (100% brightness for 0.5 hours). A diagram shows the light emitting at full brightness when motion is detected.

Important Notes

• Ensure the solar panel is exposed to direct sunlight for optimal charging.
• The motion sensor's range and sensitivity may vary depending on environmental conditions.