Paulmann Outdoor LED Luminaire with Motion Detector

General Safety Instructions

Please follow safety instructions numbered: 1, 2, 3, 4, 5, 6, 7, 10, 12, 16, 17, 19, 20, 24, 28, 33, 34.

Product Identification

Article Numbers: 947.06, 947.07, 947.08, 947.09

Technical Specifications & Compliance

This luminaire features an [IP44 rating] for outdoor use.

Energy Efficiency Class: [See energy label details above, ranging from A++ to E].

Compliance Marks: [CE mark], [UKCA mark].

Manufacturer: Paulmann Licht GmbH, Quezinger Feld 2, 31832 Springe, Germany.

More information on symbols can be found at: www.paulmann.com/symbols.

Installation Guide

Diagram A: Mounting the Fixture Base

Illustrates attaching the mounting bracket to the luminaire base using screws. The fixture is shown with a circular design.

Diagram B: Wall Mounting and Wiring

Shows a square fixture being mounted to a wall. Includes steps for connecting wires. Mentions the [IP44 rating].

Diagram C: Electrical Connections

Details the electrical connections for a 230V~ power supply. Shows a switch and terminal blocks for wiring.

Diagram D: Mounting and Timer Settings

Depicts mounting the luminaire to a wall and connecting the wiring. Shows different timer duration options: [30 seconds], [60 seconds], [120 seconds].

Operating Modes

The luminaire offers several operating modes controlled by ambient light (Lux) and motion detection.

Mode A:

Activates at <10 Lux, with standby at 2200K and 20% brightness. Motion detection triggers 3000K at 100% brightness for a duration of 30, 60, or 120 seconds. The light turns off when ambient light is >90 Lux.

Mode B:

Activates at <10 Lux, with motion detection triggering 3000K at 100% brightness for a selected duration (30S/60S/120S). The light turns off when ambient light is >90 Lux.

Mode C:

Activates at <10 Lux, with motion detection triggering 3000K at 100% brightness. The duration (Time 2) is set relative to an initial time (Time 1) plus hours (n=1,2,3...). The light turns off when ambient light is >90 Lux.

Mode D:

Activates at <10 Lux, with motion detection triggering 3000K at 100% brightness. The duration (Time 3) is set relative to an initial time (Time 1) plus hours (n=1,2,3...). The light turns off when ambient light is <90 Lux. Another setting (Time 4) is also described.

Component Replaceability

This product contains a light source of a specific energy efficiency class.

• End User Replaceable: The light source (1) or operating device (4) can be replaced by the end user without permanent damage to the luminaire.
• Electrician Replaceable: The light source (2) or operating device (5) can be replaced by a qualified electrician without permanent damage to the luminaire.
• Not Replaceable: The light source (3) or operating device (6) is not replaceable; the entire luminaire must be replaced.