Paulmann Nostro LED Outdoor Wall Light

Safety Instructions

Please follow safety instructions numbered:

• 1, 2, 3, 4, 5, 6, 7, 10, 12, 16, 17, 19, 20, 21, 24, 25, 28, 33, 34

Energy Efficiency and Replaceability

This product contains a light source with energy efficiency class A++ to E.

Replaceability:

(1) Light source or (4) operating device: Can be replaced by end users without permanent damage to the luminaire.

(2) Light source or (5) operating device: Can be replaced by a qualified electrician without permanently damaging the luminaire.

(3) Light source or (6) operating device: Not replaceable; the luminaire must be replaced.

Installation Guide

General Information:

The luminaire is rated IP44, meaning it is protected against solid objects greater than 1mm and against water jets from any direction.

Mounting and Wiring:

Step A: Mounting Bracket Attachment

Attach the mounting bracket to the wall using two (2x) screws.

Step B: Wiring and IP Rating

Connect the electrical wires: Live (L), Neutral (N), and Earth (ground). Ensure proper connections.

Step C: Luminaire Dimensions and Internal Wiring

The luminaire has internal wiring connection points. Note dimensions of 7mm and 14mm, likely for cable entry or mounting clearance.

Step D: Attaching the Luminaire to the Bracket

Align the luminaire with the mounted bracket and secure it.

Step E: Final Installation and Operation

The luminaire is now installed. It can be switched on and off using the [power switch symbol].

Note: Follow specific safety instructions (Nr. 1-7, 10 and Nr. 3,4,5,6) during installation.